• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.455-465
• /
• 2021

The Molten Salt Reactor (MSR), one of the six advanced reactor types of the 4th generation nuclear energy systems, has many impressive features including economic advantages, inherent safety and nuclear non-proliferation. This paper introduces a system analysis code named TREND, which is developed and used for the steady and transient simulation of MSRs. The TREND code calculates the distributions of pressure, velocity and temperature of single-phase flows by solving the conservation equations of mass, momentum and energy, along with a fluid state equation. Heat structures coupled with the fluid dynamics model is sufficient to meet the demands of modeling MSR system-level thermal-hydraulics. The core power is based on the point reactor neutron kinetics model calculated by the typical Runge-Kutta method. An incremental PID controller is inserted to adjust the operation behaviors. The verification and validation of the TREND code have been carried out in two aspects: detailed code-to-code comparison with established thermal-hydraulic system codes such as RELAP5, and validation with the experimental data from MSRE and the CIET facility (the University of California, Berkeley's Compact Integral Effects Test facility).The results indicate that TREND can be used in analyzing the transient behaviors of MSRs and will be improved by validating with more experimental results with the support of SINAP.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.121-129
• /
• 2008

To produce buckwheat sprouts, buckwheats were germinated at $23{\pm}2^{\circ}C$ up to 8 days in total darkness. In proximate analysis, moisture content increased from 13.87% of buckwheat groats to 93.75% of buckwheat sprouts on the 8th day of germination. On dry weight basis, lipid and ash contents increased like as protein content increased from 13.45% to 21.82% while carbohydrate content decreased due to enzyme hydrolysis. Amino acids were rich in glutamic acid, aspartic acids, and lysine, and also the ratio of the essential amino acids to total amino acids increased from 26.84% to 36.84%. Vitamin C did not exist in buckwheat groats but its content has continued to increase as far as 99.56 mg/100 g buckwheat sprouts. Rutin continued to increase by HPLC analysis from 4.71 mg/100 g buckwheat groats to 1,524 mg/100 g buckwheat sprouts. In analysis of organic acids, oxalic, maleic, and citric acids were commonly found in buckwheat sprouts. Fagopyrin was found almost none in buckwheat sprouts. In conclusion, the conversion of buckwheat seeds into sprouts through germination in darkness results in physically different final product with nutritional changes such as higher content of rutin, generation of vitamin C, abundance of the essential amino acids, and the existence of fagopyrin on very little.

• Journal of Venture Innovation
• /
• v.6 no.1
• /
• pp.59-73
• /
• 2023

In the era of the 4th Industrial Revolution, manufacturing is the implementation of smart factories through digital transformation, and refers to consumer-centered intelligent factories that combine next-generation digital new technologies and manufacturing technologies beyond the existing factory automation level. In order to successfully settle such a smart factory, it is necessary to train professionals. However, education for smart factories is difficult to have actual field mechanical facilities or overall production processes. Therefore, there is a need for a system that can visualize and control the flow and process of logistics at the actual production site. In this paper, the logistics flow of the actual site was implemented as a small FMS, a physical system, and the production process was implemented as a digital system. In real-time synchronization of the physical system and the digital system, the location of AGV and materials, and the process state can be monitored to see the flow of logistics and process processes at the actual manufacturing site. The developed digital twin system can be used as an effective educational system for training manpower in smart factories.

• Informatization Policy
• /
• v.28 no.2
• /
• pp.3-33
• /
• 2021

The purpose of this study is to analyze the research trends in the field of Blockchain that is one of the core technologies of the 4^th Industry, and present future research orientation. In this study, (1) Blockchain technologies in business perspective are summarized; (2) analysis criteria of Blockchain fields are established; and (3) results of analysis are presented and future research orientation is proposed. Major findings are as follows: (1) related research is being activate with the advent of the 3rd generation blockchain which aims for distributed applications. (2) major concerns of the technology (engineering) field is blockchain scalability and of the business (application) field is blockchain-based supply chain traceability. (3) Compared to overseas, domestic research results are very poor. (4) to catchup the gap, the spreading of awareness that blockchain is not a technology but a business means is required.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.3-15
• /
• 2009

To accomplish the greenhouse gas reduction which is over core unit project of the "Green growth" policy and "Resource circulation society", it is important to maintain proper balance and complement between energy recovery from waste and material recycling. This research(study) examined the related policies on the past of korea and foreign country, and also "The 4th resource recycling master plan" and "Energy recovery from waste plan" to provide advisable direction for resource recycling policy. The results of the research(study) showed that there were no significant difference between korea and developed foreign countries waste management policies. But in German policy, energy recovery from waste and pre-treatment are importantly considered and highly required for permission. Under current circumstance in korea, recycling will be more difficult than in the past. According to "The 4th resource recycling master plan", film type of synthetic resin was not sustainable recycled material in substance."Energy recovery from waste plan", proved that the energy recovery from RDF/RPF have lower efficiency than regular incineration generation and substance recycling. To solve these problems, the energy and remainder heat recovery must be generalized to "Energy recovery" concept and institutional improvement such as LCA(Life Cycle Assessment) system are need to support it. And also technology development to extract synthetic polymer by dissolved film type of synthetic resin must be provided.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.223-228
• /
• 2007

In this paper, Wideband antenna using E-shaped stacked patches has been designed and fabricated for 4th generation mobile communication(IMT-Advanced) AccessPoint application. E-shaped patch was miniature and brodband by made the movement route of current long. And inductive of coaxial probe compensates capacitive by slot. Therefore we fabricated to improve the bandwidth of proposed antenna. The E-shaped single patch antenna has an impedance bandwidth of about 13%(510[MHz]), By adding a second patch at the top of the first patch a bandwidth of 56%(2060[MHz]). The final fabricated antenna could have a good return loss(Return loss ${\leq}-10dB$) and a high gain(over 9.6dBi) at the range of 3.23 ${\sim}$ 5.29 [GHz].

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.43-50
• /
• 2020

The purpose of this study is to examine the case of constructing information and communication facilities in daycare centers and to propose an educational environment that can foster young talents who can lead the era of the fourth industrial revolution. In particular, after COVID19, a method was proposed to create an information and communication environment suitable for children to receive personalized education, and to create an environment for experiential education if possible, and at the same time to enable averaging of customized learning. Since there has been no research on information and communication facilities in daycare centers, we intend to place significance on starting, and in the future, to foster creative and contextual children, we will reduce the movement of teachers through smart speakers and mobile devices, and tailor the educational environment through AI data. I think that the design of the daycare center should be changed in the direction of making the product. To this end, the CM role of information and communication supervision is needed, and it is hoped that it will become a design standard for daycare centers after COVID19 by developing research on daycare centers.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.1
• /
• pp.145-151
• /
• 2009

Orthogonal Frequency Division Multiplexing (OFDM) has been focused on as 4th generation communication method for realization of Ubiquitous Network in land mobile communications services, and has been a standard technology of Wireless Local Area Network (WLAN) for a High Date Rate communication. And in maritime data communication using high frequency (HF) band, 32-point FFT OFDM system is recommended by International Telecommunication Union (ITU). Maritime communication should be kept on connecting when maritime accident or the maritime disaster happen. Therefore, main device FFT should be operated with low power consumption. In this paper we propose a low power 32-point FFT algorithm using radix-2 and radix-4 for low power operation. The proposed algorithm was designed using VHSIC hardware description language (VHDL), and it was confirmed that the output value of Spartan-3 field-programmable gate array (FPGA) board corresponded to the output value calculated using Matlab. The proposed 32-point FFT algorithm will be useful as a leading technology in a HF maritime data communication.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.2
• /
• pp.348-358
• /
• 2007

Metallothionein, a cysteine-rich stress response protein that is naturally induced by a variety of immunologic stressors, has been shown to suppress autoimmune disorders through mechanisms not yet fully defined. In the present study, we examined the underlying mechanisms by which metallothionein might mediate such regulation of autoimmunity. $Na\ddot{i}ve\;CD4^+$ T cells from metallothionein-deficient mice differentiated to produce significantly less IL-10, $TGF-{\gamma}$, and repressor of GATA, but more $IFN-{\gamma}$ and T-bet, when compared with those from wild-type mice. The levels of IL-4 and GATA-3 production were not different between the two groups of mice. Conversely, treatment with exogenous metallothionein during the priming phase drove $na\ddot{i}ve$ wild-type $CD4^+\;T$ cells to differentiate into cells producing more IL-10 and $TGF-{\beta}$, but less $IFN-{\gamma}$ than untreated cells. Metallothionein-primed cells were hyporesponsive to restimulation, and suppressive to T cell proliferation in an IL-10-dependent manner. Lymphocytes from metallothionein-deficient mice displayed significantly elevated levels of AP-1 and JNK activities in response to stimulation compared with those from wild-type controls. Importantly, transgenic mice overexpressing metallothionein exhibited significantly reduced susceptibility to collagen-induced arthritis and enhanced IL-10 level in the serum, relative to their nontransgenic littermates. Taken together, these data suggest that metallothionein is able to promote the generation of IL-10-and $TGF-{\beta}$-producing type 1 regulatory T-like cells by downregulating JNK-dependent AP-1 activity. Thus, metallothionein may play an important role in the regulation of Th1-dependent autoimmune arthritis, and may represent both a potential target for therapeutic manipulation and a critical element in the diagnostic assessment of disease potential.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.144-154
• /
• 2004

In this paper we apply the space-time block codes (STBCs), the key technologies for the 4th generation mobile communication systems, to the OFDM system and analyze their performances. First, we derive the signal models for representative STBC schemes and demodulation procedures for each scheme. We also select the parameters for OFDM system considering mobile cellular environments and assign adequate modulation schemes to STBC-OFDM schemes according to the transmission rate from 2bps/Hz to 4bps/Hz. We finally compare and analyze the performances of STBC-OFDM schemes for the selected transmission rates through computer simulations, together with performance comparison when the same modulation scheme being adopted.