• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1131-1137
• /
• 1996

The dielectric properties and phase stabilities of Pb(Zn0.6Mg0.4)1/3Nb2/3O3 [PZMN]system were investigated into substitution of A-site with Ba, Sr and Ca ions. The A-site substitutions led to the complexity of components of perovskite phase and then DPT coefficient increased. The A-site substitutions of Ba or Sr ion perovskite single phase could be easily formed by columbite process due to increase of perovskite phase stability. The variation of lattice parameters in specimen obeyed Vegard's law and curie temperature and dielectric constant of specimen decreased linearly. But Ca substitution led to perovskite phae instability. The lattice parameter dielectric constant and curie temperature of specimens drasticaly decreased with formation of pyrochlore phase.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.132.2-132
• /
• 2000

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.938-944
• /
• 1995

Dielectric properties and the stabilization of perovskite phase for the (1-y)Pb(Mg(1-x)/3Znx/3Znx/3Nb2/3)O3-yBaTiO3 ((1-y)PM1-xZxN-yBT) ceramics have been investigated as a function of amount of x and y. In the (1-y)PM0.6Z0.4N-yBT ceramics, the amount of pyrochlore phae was decreased by the addition of 2 mol% BT and the dielectric constant was increased. However, the dielectric constant decreased with further addition of BT even though pyrochlore phase was decreased. Dielectric prooperties in (1-y)PM0.6Z0.4N-yBT ceracmis were affected by the character of the BT rather than the amount of pyrochlore phase. The phase transitions were broadened and phase transition temperatures were lowered by the increase of BT contents.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.873-877
• /
• 2007

In order to apply a complex multilayer chip LC filter, this study has estimated the interfacial reaction and coupling properties of dielectric materials $Pb(Fe_{1/2}Nb_{1/2})O_3$ and Ni-Zn-Cu ferrite materials through low-temperature co-sintering (LTCS). PFN powders were fabricated using double calcinated at $700^{\circ}C$ and then $850^{\circ}C$. While the perovskite phase rate was found to be 91 %, after heat treatment at $900^{\circ}C$ for 6h, the perovskite phase rate and density exhibited a value of 100 % and 7.46$g/cm^3$, respectively. The PFN/Ni-Zn-Cu ferrite, PFN/CUO (or $Pb_2Fe_2O_5$) and ferrite/CuO (or $Pb_2Fe_2O_5$) were mechanically coupled through interfacial reactions after the specimen was co-sintered at $900^{\circ}C$ for 6 h. No intermediate layer exists for the mutual coupling reaction. This result indicates the possibility of low-temperature co-sintering without any interfacial reaction layer for a multilayer chip LC filter.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.134.1-134
• /
• 2000

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.235-239
• /
• 2006

Micro-pulling down$({\mu}-PD)$법을 이용하여 직경 $0.8{\sim}1.0mm$, 길이 $30{\sim}35mm$의 ZnO가 첨가된 near-stoichiometric $LiNbO_3$, 단결정을 성장하였다. 성장된 결정의 결정구조를 powder x-tay diffraction(XRD) patterns으로 확인하였고, electron probe micro analysis(EPMA)를 이용하여 결정내 Zn 이온들이 균일하게 분포되었음을 확인하였다. 또한 2 mol% 이상의 ZnO 첨가시 $OH^-$ 흡수밴드의 특성이 크게 변화함을 관찰함으로써 ZnO 첨가량에 일치한 역치(threshold)가 존재함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.383-386
• /
• 2000

The 0.6Ba(Zn$_{1}$3/Ta$_{2}$3/)O$_3$-0.4Ba(Co$_{1}$3/Nb$_{2}$3/)O$_3$ceramics were prepared by the conventional mixed oxide method. The structural properties of the 0.6BZT-0.4BCN ceramics with the sintering temperature were investigated by XRD, SEM. The 0.6BZT-0.4BCN ceramics had a complex-perovskite structure. Increasing the sintering temperature, the peak intensity of the superstructure reflection plane were increased and the density and ordering were increased. The density of the 0.6BZT-0.4BCN ceramics sintered at 1475$^{\circ}C$ was 6.455[g/cm$^3$].

• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.193-198
• /
• 2013

The effects of additives (Cr, Nb, Dy, and Bi) on microstructure, electrical properties, dielectric characteristics, and aging behavior of $ZnO-V_2O_5-MnO_2-Co_3O_4-La_2O_3$ (ZVMCL) ceramics were systematically investigated. The phase formed in common for all ZVMCL ceramics modified with various additives consisted of ZnO grain as a main phase, and $Zn_3(VO_4)_2$ and $ZnV_2O_4$ as the secondary phases. The sintered density and average grain size were in the range of $5.4-5.54g/cm^3$ and $3.7-5.1{\mu}m$, respectively. The ZVMCL ceramics modified with Cr exhibited the highest breakdown field (6,386 V/cm) and the ZVMCL ceramics modified with Nb exhibited the lowest breakdown field (3,517 V/cm). All additives enhanced the nonlinear coefficient (${\alpha}$), by a small or large margin, in particular, additives such as Bi and Nb noticeably increased the nonlinear coefficient, with ${\alpha}=25.5$ and ${\alpha}=23$, respectively. However, on the whole, all additives did not improve the stability against a DC stress, compared with ZVMCL ceramics.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.333-339
• /
• 2003

Ba (Co$_{1}$ 3/Nb$_{2}$ 3/)O$_3$(BCN) has a 1:2 ordered hexagonal structure. Q-value of BCN increased with increasing sintering temperature however, it significantly decreased when the sintering temperature exceeded 140$0^{\circ}C$ Ba (Co$_{1}$ 3/Nb$_{2}$ 3/)O$_3$(BZN) has the 1:2 ordered hexagonal structure and the degree of the 1 : 2 ordering decreased with the increase of the sintering temperature. The Q value of the BZN increased with increasing the sintering temperature and BZN sintered at 140$0^{\circ}C$ for 6h has a maximum Q-value. For (1-x) Ba (Co$_{1}$ 3/Nb$_{2}$ 3/)O$_3$-zBa(Zn$_{1}$ 3/Nb$_{2}$ 3/)O$_3$[(1-x)BCN-xBZN] ceramics the 1:2 ordered hexagonal structure was observed in the specimens with x$\leq$0.3 and the BaNb$_{6}$ O$^{16}$ second phase was found in the specimens with x$\geq$0.6. Grain Growth, which is rotated to the BaNb$_{6}$ O$^{16}$ second phase occurred in the specimens with x$\geq$ 0.5. In this work, the excellent microwave dielectric properties of $\tau$r=0.0 ppm/$^{\circ}C$$\varepsilon$r=34.5 and Q,$\times$f=97000GHz sere obtained for the 0.7BCV-0.3BZN ceramics sintered at 1400$0^{\circ}C$ for 20h.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1042-1045
• /
• 2001

Ba(Zn$_{1}$3/Nb$_{2}$3/) $O_3$-Sr(Zn$_{1}$3/Nb$_{2}$3/) $O_3$계에 대하여 소결 온도 변화와 Zr $O_2$첨가량에 따른 마이크로파 유전특성을 조사하였다. 동일 조성에서 소결 온도가 증가함에 따라 밀도가 향상되고 공진 주파수의 온도계수($ au$$_{f}$)는 감소하는 경향을 보였으나, 유전상수(K)와 품질계수(Q$\times$f)는 커다란 변화가 없었다. 또한 Zr $O_2$첨가량이 증가함에 따라 소결 시편의 밀도가 향상되었고 더불어 유전상수, 품질계수가 증가하는 경향을 보였으며, 공진 주파수의 온도계수가 감소하는 우수한 특성이 나타났다. 특히, 소결온도 1575$^{\circ}C$, 0.6 wt% Zr $O_2$를 첨가했을 때 유전상수가 최대($\varepsilon$$_{r}$=41)로 나타났으며, 공진 주파수의 온도계수는 1.0wt% Zr $O_2$를 첨가했을 때 최소($\tau$$_{f}$=+0.8ppm/$^{\circ}C$)로서 양호한 값을 얻을 수 있었다.었다.