• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.574-577
• /
• 2001

GaN thin films on sapphire were grown by rf magnetron sputtering with ZnO buffer layer. The dependence of GaN film quality on ZnO buffer layer was investigated by X-ray diffraction(XRD). The improved film quality has been obtained by using thin ZnO buffer layer. Using Auger electron spectroscopy(AES), it was observed that the annealing process improved the GaN film quality. The surface roughness according to the annealing temperatures(700, 900, 1100$^{\circ}C$) were investigated by AFM(atomic force microscopy) and it was confirmed that the crystallization was improved by increasing the annealing temperature. Photoluminescence at 8K shows a near-band-edge peak at 3.2eV with no deep level emission.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.142-146
• /
• 1999

CeO$_2$ buffer layers and in-situ YSa$_2Cu_3O_{7-{\delta}}$ (YBCO) thin films were grown by pulsed laser deposition method on R-plane sapphire substrates. Superconducting properties and surface morphologies of YBCO thin films exhibit strong dependence on the crystallinity of CeO$_2$ buffer layer. The best a-axis oriented CeO$_2$ buffer layers could be grown at 800 $^{\circ}C$ of deposition temperature, 1.5 J/ cm$^2$ of laser energy density and 50 mTorr of oxygen pressure. The YBCO thin films on the a-axis CeO$_2$ buffer layer have Tc (R=0) ${\ge}$ 89.5 K, ${\delta}$Tc ${\sim}$ 0.5 K, and Jc ${\ge}$ 3.2 ${\times}$ 10$^6$ A/ cm$^2$ at 77 K.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.72-76
• /
• 2015

150-nm-thick In-Zn-Tin-Oxide (IZTO) films were deposited by RF magnetron sputtering after a 10 to 50-nm-thick $SiO_2$ buffer layer was deposited by plasma enhanced chemical vapor deposition (PECVD) on polyethylene terephthalate (PET) substrates. The electrical, structural, and optical properties of the IZTO/$SiO_2$/PET films were analyzed with respect to the thickness of the $SiO_2$ buffer layer. The mechanical properties were outstanding at a $SiO_2$ thickness of 50 nm, with a resistivity of $1.45{\times}10^{-3}{\Omega}-cm$, carrier concentration of $8.84{\times}10^{20}/cm^3$, hall mobility of $4.88cm^2/Vs$, and average IZTO surface roughness of 12.64 nm. Also, the transmittances were higher than 80%, and the structure of the IZTO films were amorphous, regardless of the $SiO_2$ thickness. These results indicate that these films are suitable for use as a transparent conductive oxide for transparency display devices.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.206-211
• /
• 2003

Sol-gel 공정으로 제조된 YMnO$_3$박막의 결정상과 강유전특성에 미치는 기판종류와 버퍼층의 영향에 대하여 고찰하였다. Si(1OO) 기판위에는 hexagonal YMnO$_3$이 형성되었으나 Pt(111)/TiO$_2$/SiO$_2$/Si 기판위에는 hexagonal과 orthorhombic YMnO$_3$이 함께 형성되었다. 기판위에 미리 $Y_2$O$_3$버퍼층을 형성시킨 경우에는 Si(100)와 Pt(111)/TiO$_2$/SiO$_2$/Si 두가지 기판 모두 단일 hexagonal YMnO$_3$이 성장하였으며, 특히 c-축 배향성이 향상되었다. 박막내에 hexagonal과 orthorhombic YMnO$_3$이 혼재된 시편보다는 hexagonal 단일상이 형성된 시편이, 또한 단일상 시편중에서도 c-축 우선배향성이 좋은 시편이 그렇지 않은 시편에 비해 누설전류밀도 특성이 우수하였다. YMnO$_3$박막의 잔류분극값은 Si(100)기판을 사용했을 경우, 버퍼층 없이 제조된 시편은 0.14, 버퍼층이 삽입된 시편은 0.24$\mu$C/$ extrm{cm}^2$의 값을 나타내었다 한편 Pt(111)/TiO$_2$/SiO$_2$/Si 기판의 경우, 버퍼층 없이 형성된 YMnO$_3$시편은 이력곡선을 보여주지 못하였고, 버퍼층이 삽입된 시편은 1.14$\mu$C/$\textrm{cm}^2$의 잔류분극값을 나타내었다. 이상의 연구를 통하여 기판의 종류와 $Y_2$O$_3$버퍼층 삽입으로 YMnO$_3$박막의 결정상과 배향성을 제어함으로서 박막시편의 누설전류밀도 특성 및 강유전특성을 제어할 수 있음을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.303-308
• /
• 2011

The Gallium-doped ZnO(GZO) film deposited at a temperature of $200^{\circ}C$ and a pressure of 10 mtorr has an optical transmittance of 89.0% and a resistivity of $2.0\;m{\Omega}{\cdot}cm$ because of its high crystallinity. Effect of $Al_2O_3$ oxide buffer layers on the optical and electrical properties of sputtered ZnO films were intensively investigated for developing the electrodes of opto-electronic devices which demanded high optical transmittance and low resistivity. The use of $Al_2O_3$ buffer layer could increase optical transmittance of GZO film to 90.7% at a wavelength of 550 nm by controlling optical spectrum. Resistivity of deposited GZO films were much dependent on the deposition condition of $O_2/(Ar+O_2)$ flow rate ratio during the buffer layer deposition. It is considered that the $Al_2O_3$ buffer layer could increase the carrier concentration of the GZO films by doping effect of diffused Al atoms through the rough interface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.47-50
• /
• 2000

This paper investigated structural and electrical properties of $Y_2$ $O_3$ as a buffer layer of single transistor FRAM (ferroelectric RAM). $Y_2$ $O_3$ buffer layers were deposited at a low substrate temperature below 40$0^{\circ}C$ and then RTA (rapid thermal anneal) treated. Investigated parameters are substrate temperature, $O_2$ partial pressure, post-annealing temperature, and suppression of interfacial $SiO_2$ layer generation. For a well-fabricated sample, we achieved that leakage current density ( $J_{leak}$) in the order of 10$^{-7}$ A/$\textrm{cm}^2$, breakdown electric field ( $E_{br}$ ) about 2 MV/cm for $Y_2$ $O_3$ film. Capacitance versus voltage analysis illustrated dielectric constants of 7.47. We successfully achieved an interface state density of $Y_2$ $O_3$/Si as low as 8.72x1010 c $m^{-2}$ e $V^{-1}$ . The low interface states were obtained from very low lattice mismatch less than 1.75%.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.801-804
• /
• 2006

[ $YBa_2Cu_3O_{7-{\delta}}(YBCO)$ ]계 초전도 선재용 $GdAlO_3(GAO)$ 버퍼층을 졸-겔(sol-gel) 공정에 의해 제조하였다. 전구체 용액은 Gd 질산염과 Al 질산염을 1:1 화학양론비로 하여 메탄올에 용해하여 준비하였다. 전구체 용액을 $SrTiO_3(STO)$ (100) 단결정 기판위에 스핀 코팅하고, 수분이 포함된 $N_2-5%\; H_2$ 분위기에서 $1000^{\circ}C$에서 2시간 열처리 하였다. 열처리 후 GAO 층의 표면에 대한 주사전자현미경 관찰에 의해 GAO 층이 에피택셜의 특징인 각면 형상을 갖는 것을 알 수 있었다. X-선 회절분석에 의하면 GAO 버퍼층은 c-축으로 우선 배향된 에피택셜 박막으로써 반가폭이 각각 (002)면에서 $0.29^{\circ}(out-of-plane)$, {112}지면에서 $1.10^{\circ}(in-plane)$의 우수한 배향성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.168.1-168.1
• /
• 2014

We developed poly (3,4-ethylene dioxylene thiophene):poly (styrene sulfonic acid) (PEDOT:PSS)-free organic solar cells (OSCs) using buffer and anode combined Ta doped $In_2O_3$ (ITaO) electrodes. To optimize the ITaO electrodes, we investigated the effect of $Ta_2O_5$ doping power on the electrical, optical, and structural properties of the co-sputtered ITaO films. The optimized ITaO film doped with 20 W $Ta_2O_5$ radio frequency power showed sheet resistance of 17.11 Ohm/square, a transmittance of 93.45%, and a work function of 4.9 eV, all of which are comparable to the value of conventional ITO electrodes. The conventional bulk heterojunction OSC with ITaO anode showed a power conversion efficiency (PCE) of 3.348% similar to the OSCs (3.541%) with an ITO anode. In addition, OSCs fabricated on an ITaO electrode successfully operated without an acidic PEDOT:PSS buffer layer and showed a PCE of 2.634%, which was much higher than the comparable no buffer OSC with an ITO anode. Therefore, co-sputtered ITaO electrodes simultaneously acting as a buffer and an anode layer can be considered promising transparent electrodes for cost-efficient and reliable OSCs because they can eliminate the use of an acidic PEDOT:PSS buffer layer.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권2호
• /
• pp.7-10
• /
• 2004

A study regarding the epitaxial growth of single $Y_2O_3$ buffer layer on biaxially textured Ni and NiW substrates using pulsed laser deposition is presented. Different deposition conditions were employed and compared in order to obtain good epitaxial $Y_2O_3$ film, furthermore importantly, to obtain good YBCO superconducting films. Following YBCO film deposited by PLD on the top of $Y_2O_3$ films have a good structure and superconducting properties. The J$_{c}$ of YBCO films on $Y_2O_3$ /Ni and $Y_2O_3$ /NiW were $1.0{\times}10^6 A/cm^2 and 1.1\times}10^6 A/cm^2$<.TEX> at 77K and self-field respectively, which indicated that $Y_2O_3$ is a suitable candidate as a single buffer layer for the fabrication of YBCO coated conductor.r.

• 전자공학회논문지D
• /
• 제34D권8호
• /
• pp.80-86
• /
• 1997

H:LiNbO$_{3}$ optical modulator buffered by parylene layer, which has a merits in the bandwidth, power consumption and fabrication as compared with conventional SiO$_{2}$ buffered optical modulator, is proposed and analyzed. The dependences of velocity matching condition, charcteristics impedance, and driving voltage on dielectric constants, thickness of buffer layer, and electrode configurations are demonstrated with finite element calculation. And we performed the physical and chemical test of parylene buffer layer deposited on LiNbO$_{3}$ and under Au electrodes.