• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.05a
• /
• pp.42-43
• /
• 1994

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.89-94
• /
• 2010

Bi-Te films were processed by coevaporation of Bi and Te dual sources with variations of the mole ratio of the Bi and Te evaporation sources, and thermoelectric properties of the coevaporated Bi-Te films were characterized. The coevaporated Bi-Te films were n-type semiconductors and exhibited Seebeck coefficients of $-60{\sim}-80{\mu}V/K$. The Terich Bi-Te film, processed with Bi and Te dual sources of 30 mol% Bi : 70 mol% Te ratio, exhibited a power factor of $5{\times}10^{-4}W/m-K^2$. On the other hand, a power factor of $17.7{\times}10^{-4}W/m-K^2$ was obtained for the Bi-rich film coevaporated using Bi and Te dual sources of 90 mol% Bi : 10 mol% Te ratio.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.166-166
• /
• 2003

경제적 효율의 발전을 원칙으로 하는 종래의 틀을 넘어서서 환경공생형의 새로운 에너지 시스템의 개발에 대한 요구가 증대되어 지고 있다. 이러한 시대적 흐름에 부응하는 여러 가지 신재료의 개발에 관한 연구가 이루어지고 있다. 그 중에서 전기를 열로 열을 전기로 변환 시킬 수 있어서 폐열의 이용 및 전자냉각기술 등에 이용 가능한 열전변환재료가 커다란 기대를 모으고 있다. 열전재료는 사용온도 영역에 따라 여러 가지 재료가 개발되어 지고 있으며, 현재 상온부근 및 저온영역에서 응용 가능한 재료로써 Bi$_2$Te$_3$계 고용체에 관한 연구가 활발하게 진행되고 있다. 예를 들어, Bi$_2$Te$_3$ 고용체에서 Bi를 Sb으로 치환한 p-type의 (Bi,Sb)$_2$Te$_3$ 고용체와 Te을 Se으로 치환한 n-type의 Bi$_2$(Te,Se)$_3$ 고용체에 관한 연구가 이루어지고 있다. 최근 들어 Kutasov등은 종래에 P-type의 열전재료로써 높은 특성을 나타내는 것으로 알려진(Bi,Sb)$_2$Te$_3$ 고용체가 Sb의 치환량과 Te의 도핑량을 잘 조절하면 n-type의 높은 열전 특성을 나타낸다고 보고하였다. 본 연구에서는 과잉으로 첨가된 Te이 n-type (Bi,Sb)$_2$Te$_3$ 고용체에 미치는 영향을 보다 체계적으로 조사하기 위한 기초단계의 연구로써 Te을 0-0.9at.%로 과잉 첨가하여 제조한 고용체 및 소결체의 미세구조에 관하여 조사하였다.

• Journal of Powder Materials
• /
• v.3 no.4
• /
• pp.246-252
• /
• 1996

$Bi_{2}Te_{3}-Sb_{2}Te_{3}$, $Bi_{2}Te_{3}-Bi_{2}Se_{3}$ solid solutions are of great interest as materials for thermoelectric energy conversion. One of the key technologies to ensure the efficiency of thermoelectric device is to obtain chemically homogeneous solid solutions. In this work, the new process with rapid solidification followed by hot pressing was investigated to produce homogeneous thermoelectric materials. Characteristics of the materials were examined with XRD, SEM, EPMA-line scan and bending test. Property variations of the materials were investigated as a function of variables, such as excess Te quantity and hot pressing temperature. Quenched ribbons are very brittle and consisted of homogeneous $Bi_{2}Te_{3}$, $Sb_{2}Te_{3}$ solid solutions. When the process parameters were optimized, the maximum figure of merit was 3.073$\times$$10^{-3}K^{-4}$. The bending strength of the material, hot pressed at 45$0^{\circ}C$, was 5.87 kgf/${mm}^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.230-230
• /
• 2010

본 연구에서는 개조된 MOCVD법을 이용하여 (100) GaAs 기판 위에 나노 구조 $Bi_2Te_3$ 열전 필름을 성장시켰다. 기존의 MOCVD법과 달리 서셉터의 모양을 변화시켜 기체상태에서 $Bi_2Te_3$ 나노파티클의 형성과 기판위에서 성장을 유도 하였다. 또한 서셉터의 노즐의 면적을 변화시켜 기체의 속도를 제어함에 따라 $Bi_2Te_3$ 필름을 형성시켰다. 서셉터의 모양의 변화에 따라 기체 상태에서 $Bi_2Te_3$ 나노파티클을 형성하고 이를 기판위에서 성장시켜 $Bi_2Te_3$ 열전 필름의 결정립계를 조절할 수 있었고, 또한 노즐의 면적의 변화에 따른 기체의 속도를 제어하여 $Bi_2Te_3$ 결정립계 및 결정 배향 방향을 조절 하였다. 본 연구결과에서는 MOCVD 반응관의 서셉터의 모양 및 노즐의 면적의 변화에 따라 결정립계 및 결정 성장방향이 조절될 수 있음을 확인하였고 이러한 변화에 따라 열전도도를 제어하여 열전성능지수의 향상을 기대 할 수 있다.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.408-412
• /
• 1998

Thermoelectric properties of Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$(0.05$\leq$x$\leq$0.25) prepared by mechanical alloying and hot pressing, were investigated. Contrary to the p-type behavior of single crystals, the hot-pressed Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$ exhibited ntype conduction without addition of donor dopant. When $Bi_2(Te_{0.85}Se_{0.15})_3$powders were annealed in (50% $H_2$ + 50% Ar) atmosphere, the hot-pressed specimen exhibited a positive Seebeck coefficient due to the reduction of the electron concentration by removal of the oxide layer on the powder surface and annealing-out of the excess Te vacancies. Among the Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$fabricated by mechanical alloying and hot pressing, $Bi_2(Te_{0.85}Se_{0.15})_3$ exhibited a maximum figure-of-merit of 1.92 $\times$ $lO^{-3}$/K.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2167-2170
• /
• 2013

A low-cost and simple recycling process of waste thermoelectric modules has been investigated using chemical reduction methods. The recycling is separated by two processes, such as dissolving and reduction. When the waste thermoelectric chips are immersed into a high concentration of $HNO_3$ aqueous solution at $100^{\circ}C$, oxide powders, e.g., $TeO_2$ and $Sb_2O_3$, are precipitated in the $Bi^{3+}$ and $HTeO{_2}^+$ ions contained solution. By employing a reduction process with the ions contained solutions, $Bi_2Te_3$ nanoparticles are successfully synthesized. Due to high reduction potential of $HTeO{_2}^+$ to Te, Te elements are initially formed and subsequently $Bi_2Te_3$ nanoparticles are formed. The average particle size of $Bi_2Te_3$ was calculated to be 25 nm with homogeneous size distribution. On the other hand, when the precipitated powders reduced by hydrazine, $Sb_2O_3$ and Te nanoparticles are synthesized because of higher reduction potentials of $TeO_2$ to Te. After the washing step, the $Sb_2O_3$ are clearly removed, results in Te nanoparticles.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.3080-3087
• /
• 2023

Thermoelectric (TE) materials working in radioisotope thermoelectric generators are irradiated by neutrons throughout its service; thus, investigating the neutron irradiation stability of TE devices is necessary. Herein, the influence of neutron irradiation with fluences of 4.56 × 10¹⁰ and 1 × 10¹³ n/cm² by pulsed neutron reactor on the electrical and thermal transport properties of n-type Bi₂Te_2.7Se_0.3 and p-type Bi_0.5Sb_1.5Te₃ thermoelectric alloys prepared by cold-pressing and molding is investigated. After neutron irradiation, the properties of thermoelectric materials fluctuate, which is related to the material type and irradiation fluence. Different from p-type thermoelectric materials, neutron irradiation has a positive effect on n-type Bi₂Te_2.7Se_0.3 materials. This result might be due to the increase of carrier mobility and the optimization of electrical conductivity. Afterward, the effects of p-type and n-type TE devices with different treatments on the output performance of TE devices are further discussed. The positive and negative effects caused by irradiation can cancel each other to a certain extent. For TE devices paired with p-type Bi_0.5Sb_1.5Te₃ and n-type Bi₂Te_2.7Se_0.3 thermoelectric legs, the generated power and conversion efficiency are stable after neutron irradiation.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.40-49
• /
• 1997

$Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ thermoelectric matcrials havc 11et:n fahricxted hy mechanical alloying and hot pressing methods. Microstructure and thermoelectric properties of the hot 11resseii $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ have been investigated Lvith variations of hot pressing temperature and dopmt atltiition Formation of $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ alloy powders was completed by mechanical alloying of the as-mixed Ri. Te, arid Sc grmules of ~3.6mm size for 3 hours at ball-to-material weight ratio of 5 : 1. Figure of merit of $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ was markedly incrcwieti hy hot pressing at temperatures above $450^{\circ}C$, and value of $1.9{\times}10^{-3}/K$ was obtained for the specimen hot pressed at $550^{\circ}C$. With addition of 0.015 wt% Ri as acceptor dopant, figure of merit ol $Bi_{2}(Te_{0.9}Se_{0.1})_{3}$ hot pressed $550^{\circ}C$$2.1{\times}10^{-3}/K$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.02a
• /
• pp.67-67
• /
• 1995