• Journal of the Korean Geotechnical Society
• /
• v.32 no.12
• /
• pp.23-32
• /
• 2016

A single particle crushing test was carried out for recycled aggregates from waste concrete while demolishing various structures. When the recycled aggregates were used for backfill or road subbase materials, load-displacement and crushing characteristics were analyzed. The recycled aggregates with hydrates and aggregates were sorted into 40 mm size (75-40 mm) and 20 mm size (40-20 mm). At initial loading, their irregular surface was closed to and then crushed by loading plate. Such first crushing stage was called 'Surface crushing'. Further loading, some hydrate was crushed and detached from aggregate, and such process repeated several times. This state is called 'hydrate crushing'. The final state is called 'aggregate crushing' in which aggregate crushed and following load suddenly dropped down. As the load increased, such crushing cycle is repeated several times. The shapes of aggregates are round or square, and triangle or long shaped. Depending on their shapes and surface conditions, they crushed in different ways. The 63% of aggregates showed more than 50% load reduction due to aggregate crushing. The 90% load reduction occurred at 15% of aggregates. The 40 mm aggregate crushed at maximum load between 3.05-4.38 kN and 70% of crushed aggregates were less than 20 mm.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• Spatial Information Research
• /
• v.21 no.1
• /
• pp.45-52
• /
• 2013

Recently 3D surveying is recommended to manage underground facilities systematically before refilling of site operation. As the demand of realtime localization increases, cost reduction and consistent data construction which are realizable by using one man surveying method with unmanned target, are necessary for constructing DB of all sorts of the underground facilities with more speediness and correctness. This study sets a goal to develop a new type of surveying target which allows realtime localization to be performed by one man, through making an optimum reflector(triangle, quadrangle, and semispherical shape) by using the retro-reflection principle of optical prism which is being used for surveying currently. The new surveying target makes realtime surveying possible. To check reliability of its data, the accuracy is compared with surveying coordination of total station for each type in a quantitative method. In the result, the usefulness of the reflector for Underground Facilities localization is proved. Thus the foundation for underground DB construction conducted by one man is established for acquisition of 3D location information in more efficient way through using unmanned target.

• Korean Journal of Family Social Work
• /
• no.55
• /
• pp.91-128
• /
• 2017

The purpose of this study is to develop an effective intervention strategy for marriage migrant woman in family therapy. For this purpose, we collected counseling cases of professional counselors who successfully completed counseling and attempted the qualitative analysis of treatment intervention strategies and effects. The results of the study were obtained by dividing the meaning units in the immigrant woman's statements made during the counseling process composed of a total of 6 sessions. The counselors were analyzed to have tried the following intervention strategies. They attempted the following six strategies: Helping emotional differentiation by searching for unresolved emotional problems, dealing with undifferentiation due to family projection process and love triangle, dealing with multi-generational transfer process of the original family relationship patterns and coping mechanism, shedding lihgt on ineffectiveness of inconsistent communication due to emotional oppression applying a communication model of MRI, switching client's awareness through reorganization, suggesting a way of communication that leads to real self. Such counselors' attempts resulted in positive changes and treatment effects were found to include first, cognitive insights and motivation for change, second, improved communication skills and third, anxiety reduction and self-differentiation. Due to their husbands' refusal to participate in counseling, marriage migrant women often get involved in counseling alone, so they tend to worry that the effectiveness of family therapy may be low but it was found that the proper intervention of the counselor could improve the ability of the wife to resolve conflicts, which would be a great help in solving problems such as family violence and this study is meaningful in that it provided the appropriate therapeutic intervention strategies needed.

• Design & Manufacturing
• /
• v.17 no.4
• /
• pp.33-41
• /
• 2023

Excessive use of plastic bottles contributes to a significant environmental issue due to the high volume of plastic waste generated. To address this, efforts are needed to reduce the weight of plastic bottles. However, indiscriminate weight reduction may compromise the essential rigidity required for plastic bottles. Extensive research on rib shape for pressure vessels are exists, but there is a few research of rib shapes to enhance the stiffness of plastic bottles. The following results were obtained from the analyses conducted in this study. 1) Among the rib cross-sections of square, trapezoid, and triangle, the buckling critical load of PET bottles with square-shaped ribs is improved by about 14% compared to the buckling critical load of PET bottles without ribs. 2) The buckling critical load is improved by about 18% when a square-shaped rib with an aspect ratio of 0.2 is applied, compared to the buckling critical load of the bottle without the rib. 3) When longitudinal and transverse square ribs were applied to the axial direction of the PET bottle, the buckling critical load was improved by about 32% and 58% compared to the buckling critical load of the PET bottle without ribs, respectively, indicating that applying longitudinal ribs is effective in reinforcing the stiffness of PET bottles. 4) When 14 transverse ribs were applied, the maximum improvement was about 48% compared to the buckling critical load of the plastic bottle without ribs. 5) When 3 longitudinal ribs were applied on each side, the maximum improvement was about 76% compared to the buckling critical load of the bottle without ribs. Therefore, it was concluded that for effective stiffness reinforcement of a 500ml square bottle with a thickness of 0.5mm, 3 square-shaped ribs with an aspect ratio of 0.2 should be applied in the longitudinal direction relative to the axial direction of the bottle.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.156-163
• /
• 1995

The practical shelf-life of pasteurized Korean rice wine ‘Yakju’, aseptically packed in Tetra-pak, was determined. The test sample products were stored at $4^{\circ}C,\;20^{\circ}C,\;30^{\circ}C\;and\;35^{\circ}C$ for 19 weeks, and the quality assessment was made at two weeks interval. The quality parameters evaluated were pH, acidity, reducing sugar, absorbance at 370 nm, total and acid producing bacteria, yeast and mold, and sensory quality. No meaningful changes of pH and reducing sugar were noticed during the storage for 19 weeks at temperatures tested. The absorbance at 370 nm increased slightly during storage. The total numbers of microorganisms in the product decreased during storage and a drastical reduction of acid producing bacteria was observed after 6 weeks of storage. Both yeast and mold were not found in the pasteurized products. The sensory quality of stored rice-wine was evaluated by triangle test and scoring test. The panels could distinguish the product stored at $4^{\circ}C$ from other products stored at the higher temperatures for over 6 weeks. The overall acceptance of the product decreased gradually during storage, and the rate constants for the changes were $7.93{\times}10^{-3},\;at\;20^{\circ}C,\;9.69{\times}10^{-3}\;at\;30^{\circ}C\;and\;13.4{\times}10^{-3}\;at\;35^{\circ}C$, respectively. The activation energy estimated by Arrhenius equation was 24,795 kJ/kmol. The estimated shelf-life of Yakju pasteurized and aseptically packed was 24 months at $10^{\circ}C$, 16 months at $25^{\circ}C$ and 14 months at $25^{\circ}C$. The shelf-life of Yakju in Seoul was calculated to be 20 months, based on the monthly average temperature of the city.