• Journal of applied mathematics & informatics
• /
• 제27권1_2호
• /
• pp.205-215
• /
• 2009

Sufficient conditions for the existence of at least one solution of the boundary value problems for higher order nonlinear difference equations $\{{{{{\Delta^n}x(i-1)=f(i,x(i),{\Delta}x(i),{\cdots},\Delta^{n-2}x(i)),i{\in}[1,T+1],\atop%20{\Delta^m}x(0)=0,m{\in}[0,n-3],}\atop%20\Delta^{n-2}x(0)=\phi(\Delta^{n-1}(0)),}\atop%20\Delta^{n-1}x(T+1)=-\psi(\Delta^{n-2}x(T+1))}\$. are established.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.18-24
• /
• 2002

This study verified the relationship between fracture mechanics parameters(${\Delta}K,\;K_{max}$) and X-ray parameters ($(\sigma}_r,;B$) for G365 steel at elevated temperature up to $300{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase in low ${\Delta}K$ region, reach to a maximum value at a certain value of $K_{max}$ or ${\Delta}K$ and then decrease. Residual stress was independent on stress ratio by arrangement of ${\Delta}K$ and half value breadth was independent by the arrangement of $K_{max}$. The equation of ${\sigma}_r-{\Delta}K$ was established by the experimental data. Therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.67-71
• /
• 2010

Head up display’s cooling system is auto-diagnosed resulting from the external environment. The quantity of heat depending on this Head up display’s cooling system layout determines the speed of FAN for system cooling. In other words, a system’s heat quantity is planned through the air density depending on altitude, the amount of wind in air depending on FAN control condition, and the algorithm that is proportional to delta temperature. To detect the altitude, we use the criteria of delta T, which is determined by the subtracted value of LED junction temperature, and atmospheric temperature that is recorded on the Head up display system. Depending on the classification of delta T value, the altitude section is determined. While we can use GPS as the tool to detect the altitude, we should predict the change of the air density as the altitude alters, and should not just measure the altitude. And the value of delta T is used as the criterion of detecting the altitude for increasing the cooling efficiency of the car’s inner Head up display system with reflecting the speed of the FAN dependent upon the air density. In our theory, altitude is depending on the value of delta T and stabilizing or maintaining the system’s temperature by changing FAN’s rpm depending on determined value of altitude.

• 한국식품과학회지
• /
• 제31권3호
• /
• pp.575-580
• /
• 1999

복령은 온도와 풍속, 온도와 방사거리를 변화시켜 열풍건조와 원적외선건조방법으로 건조함으로써 건조조건에 따른 색도, 갈변도, 총페놀함량, 전자공여능 등의 품질변화에 미치는 영향을 조사하였다. 색도는 열풍건조시료에서 건조온도와 풍속이 증가할수록, 원적외선건조시료에서 건조온도는 증가하고 방사거리가 짧아질수록 ${\Delta}L$, ${\Delta}a$, ${\Delta}E\;value$는 증가하였고, ${\Delta}b\;value$는 감소하였으며 그 변화폭도 커졌다. 그리고, 갈변된 정도를 알 수 있는 추출물의 흡광도는 색도 변화와 같은 양상을 보였다. 복령의 총페놀함량은 원적외선 시료가 열풍건조시료보다 낮은 함량을 나타냈지만 전체적으로 시판품의 함량보다는 높은 함량을 보였다. 전자공여능은 온도, 풍속과 방사거리에 따른 각 구간별 차이는 거의 없었다. 따라서 원적외선건조보다는 열풍건조로, $50^{\circ}C$의 낮은 건조온도와 0.5 m/s의 느린 풍속으로 건조할 때 품질에 영향을 주는 색도변화와 화학성분함량의 손실을 최소화할 수 있는 것으로 사료되며, 원적외선 열원을 고온, 장시간 사용할 경우 품질손실은 매우 크게 나타났다.

• 대한화학회지
• /
• 제36권4호
• /
• pp.517-522
• /
• 1992

10$^{\circ}C$와 20$^{\circ}C$에서 ${\beta}$-피콜린과 치환된 벤조일클로라이드류의 반응을 압력변화에 따라 아세토니트릴용매내에서 전기전도도법으로 연구하였다. 유사 1차속도상수와 2차속도상수로부터 여러 가지 활성화파라미터들(${\Delta}V{\neq}$, ${\Delta}{\beta}{\neq}$, ${\Delta}H{\neq}$, ${\Delta}S{\neq}$ and ${\Delta}G{\neq}$)을 구하고, Hammett ${\rho}$값의 압력의존성을 설명하였다. ${\Delta}V{\neq}$, ${\Delta}{\beta}{\neq}$ 및 ${\Delta}S{\neq}$ 는 모두 음의 값을 나타내었고, 압력증가에 따라 속도상수와 Hammett ${\rho}$값은 증가하며, 결합형성이 더욱 촉진된 반응메카니즘으로 진행됨을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.317-323
• /
• 2001

This study verified the relationship between fracture mechanics parameters$({\Delta}K,\;{\Delta}K_{eff},\;K_{max})$ and X-ray parameters $(\sigma_r,\;B)$ for SG365 steel at elevated temperature up to $300^{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase low ${\Delta}K$ region, reach to a maximum value at a certain value of $K_{max}\;or\;{\Delta}K$ and then decrease. Residual stress were independent on stress ratio by arrangement of ${\Delta}K$ and half value breadth were independent by the arrangement of $K_{max}$. The equation of $\sigma_r-{\Delta}K$ was established by the experimental data. Therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.

• 대한치과보철학회지
• /
• 제42권5호
• /
• pp.514-523
• /
• 2004

Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.

• 전자공학회논문지C
• /
• 제34C권4호
• /
• pp.26-35
• /
• 1997

This paper proposes a multi-bit $\Sigma\Delta$ modulator arcitecture which eliminates signal clipping problem. To avoid signal clipping, the output values of intgrators are monitored and modified by a reference value. This oepration is recorded as a digital code to restore actual signal value. Due to the digital code, the substraction of feedback value from the multi-bit quantizer can be calculated by a digital adder and this simplifies dAC operation making the accurate DAC of conventional multi-bit $\Sigma\Delta$ modulator scheme unnecessary. These features make N-th modulator can be implemented by sharing an integrator among N stages to decrease the required chip area. As an experimental example, a 4th order .sum..DELTA. modulator with oversampling ratio of 64 was simulated to show over 130 DB SNR at rail-to-rail input sinusoidal signal.

• Journal of Microbiology and Biotechnology
• /
• 제12권1호
• /
• pp.149-152
• /
• 2002

The effect of pressure on the catalytic properties of glutamate racemase from Aquifex pyrophilus, an extremophilic bacterium, was investigated. The activation volume for the overall reaction $({\Delta}V^{\neq})$ and catalysis $({{Delta}V_{cat}}^{\neq})$ was -96.97 ml/mol and 4.97 ml/mol, respectively, while the reaction volume for the substrate binding (${\Delta}V_{K_m^-1}$) was -101.94 ml/mol. The large negative ${\Delta}V^{\neq}$ for the overall reaction indicated that the pressurization of glutamate racemase resulted in enhanced catalytic efficiencies. In addition, this value was also due to the large negative ${Delta}V_{K_m^-1}$ for the substrate binding. The negative value of ${Delta}V_{K_m^-1}$ implied that the conformational changes in the enzyme molecule occurred during the substrate binding process, thereby increasing the degree of hydration. The small value of ${{Delta}V_{cat}}^{\neq}$suggested that the pressure did not affect the glutamate racemase catalysis after the substrate binding.

• 한국환경보건학회지
• /
• 제28권5호
• /
• pp.4-12
• /
• 2002

It is well-known method to use Ethylene Oxide (ETO) as a fumigant to preserve cultural heritage from the attack of some bacteria and insects. In this article, we investigated co]or change of some cultural material upon treating ETO. The cultural material was selected from Korean paper (hanji), ancient books, blue prints, pigments (DA, DB, DC, DD, DE and DF). hemp cloths, and colored pictures (DG, DH, Dl, DJ, DK). The $\Delta$E value in chromaticity coordinates for each item was obtained upon treatment with ETO at concentration of 200, 250, 380, 500, 710 g/m$^3$ respectively. The $\Delta$E value was derived from the equation of L*at with the data checked 24 hr, 48 hr, and 72 hrs respectively. The Korean papers(hanji) showed slightly change in color by $\Delta$E 0.8. In the case of ancient books, it showed $\Delta$E 2.91 which was easily distinguishable with the naked eyes. For the almost 73％ of blue prints, the value of $\Delta$E was as much as more than 4.0 that it is recommended not to use. In the case of pigments, the value of $\Delta$E was ranged from 0.15 up to 4.0 so that it should be very careful before use. The hemp cloth dyed with natural indigo showed less than 1.00 in $\Delta$E, while various colored hemp cloth showed wide range of $\Delta$E from 1.00 to 4.00. Finally, from the fact that the color change was as small as less than 1.00 for the colored pictures, it is thought that treatment with ETO is one of method to be used to this purpose.