PBD의 통수능력은 지반조건 빛 두께에 비례하여 영향을 크게 받는 성질이 있으며, 배수재 타입 시 시용되는 맨드럴, 타입기기 및 방식에 의한 주변지반의 교란영향으로 배수성능이 저하되는 문제점 등이 있다. 또한, 여러 기지 조건에 따라 통수능의 편차가 크게 나타나며 원지반 조건에 따라 배수재의 통수능 저하, 간극수압소산의 시간지연 등의 분석이 미흡하다. 따리서 본 연구에서는 원지반 조건을 고려한 연직배수재의 복합 통수능 시험을 실시하여 지반개량 및 통수능 평가를 하였다. ${\phi}\;38{\times}70cm$ 크기의 원통형 실린더에 배수재를 고정한 후 교반한 시료를 투기하고 원지반 조건 CL, ML, SM과 준설토 CL을 매립한 후 가입장치를 사용하여 30, 70, 120 kpa의 하중을 가해 단계별로 복합통수능 실험을 수행하였다. 시험결과, 통수능의 크기는 원지반 조건이 SM>ML>CL>CL(준설토)인 순으로, 세립분 함량이 적을수록 통수량은 크게 나타났다.
본 연구는 학교건물의 유지관리를 위한 장기수선충당금 산정을 목적으로 수행되었으며, 이를 위해 서울 교육청에서 발주한 BTL 사업 대상 학교를 중심으로 사례를 선정하였다. 다음으로 사례 학교건물의 초기투자비용을 공종별로 분류한 후 장기 수선충당금을 산정하였다. 이렇게 산정된 공종별 장기수선충당금을 공동주택 장기수선충당금 산정방법과 연등가액 산정방법을 준용하여 비교 분석하였다. 위와 같은 목적과 방법에 따라 진행 된 본 연구의 결론을 요약하면 다음과 같다. 첫째: 사례 학교건물의 공종별 장기수선충당금의 비율을 정리하면 공사비용 대비 건축14.0%, 토목1.4%, 기계6.5%, 전기11.0%, 비품5.1%%, 기타1.0%의 분포를 나타냈다. 둘째: 산정된 공종별 장기수선충당금을 공동주택 장기수선충당금 산정방법과 연등가액 산정방법을 각각 이용하여 비용편차를 비교하였다.
The Spark Plasma Sintering(SPS) method offers a means of fabricating a sintered-body having high density without grain growth through short sintering time and a one-step process. A titanium compact having high density and purity was fabricated by the SPS process. It can be used to fabricate a Ti sputtering target with controlled parameters such as sintering temperature, heating rate, and pressure to establish the optimized processing conditions. The compact/target(?) has a diameter of ${\Phi}150{\times}6.35mm$. The density, purity, phase transformation, and microstructure of the Ti compact were analyzed by Archimedes, ICP, XRD and FE-SEM. A Ti thin-film fabricated on a $Si/SiO_2$ substrate by a sputtering device (SRN-100) was analyzed by XRD, TEM, and SIMS. Density and grain size were up to 99% and below $40{\mu}m$, respectively. The specific resistivity of the optimized Ti target was $8.63{\times}10^{-6}{\Omega}{\cdot}cm$.
Objective : The goal of this study was to analyze the clinical outcomes of endoscopic third ventriculostomy (ETV) and endoscopic septostomy when shunt malfunction occurs in a patient who has previously undergone placement of a ventriculoperitoneal shunt. Methods : From 2001 to 2020 at Seoul National University Children's Hospital, patients who underwent ETV or endoscopic septostomy for shunt malfunction were retrospectively analyzed. Initial diagnosis (etiology of hydrocephalus), age at first shunt insertion, age at endoscopic procedure, magnetic resonance or computed tomography image, subsequent shunting data, and follow-up period were included. Results : Thirty-six patients were included in this retrospective study. Twenty-nine patients, 18 males and 11 females, with shunt malfunction underwent ETV. At the time of shunting, the age ranged from 1 day to 15.4 years (mean, 2.4 years). The mean age at the time of ETV was 13.1 years (range, 0.7 to 29.6 years). Nineteen patients remained shunt revision free. The 5-year shunt revision-free survival rate was 69% (95% confidence interval [CI], 0.54-0.88). Seven patients, three males and four females, with shunt malfunction underwent endoscopic septostomy. At the time of shunting, the age ranged from 0.2 to 12 years (mean, 3.9 years). The mean age at the time of endoscopic septostomy was 11.9 years (range, 0.5 to 29.5 years). Four patients remained free of shunt revision or addition. The 5-year shunt revision-free survival rate was 57% (95% CI, 0.3-1.0). There were no complications associated with the endoscopic procedures. Conclusion : The results of our study demonstrate that ETV or endoscopic septostomy can be effective and safe in patients with shunt malfunction.
본 연구는 국내의 대표적 굴 양식지인 거제한산만에서 저서동물군집의 시 공간적 분포 및 구조적 변화를 파악하고자 수행되었다. 현장 조사를 위해 굴 양식지와 비양식지를 포함하는 총 15개 정점을 선정하였으며 2008년 2월부터 11월까지 계절별로 저서환경과 대형저서동물군집에 대한 조사를 수행하였다. 표층퇴적물은 평균입도 $9.0\;{\Phi}$ 전후의 극세립실트로 구성되었으며 총유기탄소는 평균 1.9%이었다. 용존산소농도의 평균은 8.1 mg/L이었으며 사계절 중 가장 낮은 값은 보인 8월에는 해역 수질환경기준 II등급에 해당하는 농도가 관찰되었다. 저서동물군집의 총 종수는 351종, 평균 개체밀도는 3,675 개체/$m^2$ 이었으며 두 가지 변수에서 모두 다모류가 가장 우세한 동물군이었다. 출현종수와 개체밀도는 시 공간적으로 크게 변하였으며 계절적으로는 5월에 그리고 공간적으로 내만역 보다는 수로역에서 높은 값을 보였다. 주요 우점종은 Lumbrineris longifolia(21.3%), Aphelochaeta monilaris(17.8%) 그리고 Ericthonius pugnax(6.1%) 등으로 모두 유기물이 풍부한 해역을 대표하는 종들이었다. 다변량분석 결과, 전체군집은 내만역과 수로역으로 구분되었다. 전체군집의 시 공간적 변화와 가장 밀접한 상관성을 보인 환경요인은 총유기탄소와 산휘발성황화물이었다. 저서동물군집 구조와 주요환경요인의 특성은 거제한산만에서 유기물 오염의 징후가 있음을 의심하게 하였으며 그러한 현상은 특히 내만역의 굴 양식지에서 뚜렷하였다.
구조해석기법의 발전과 경제성을 중시하는 현실에 의해 건축물 주골조의 모멘트 강도비($M_u/{\Phi}M_n$)는 점차 증가하고 있다. 따라서 본 연구에서는 지붕재로 샌드위치패널을 사용하는 건축물의 안전성검토를 위하여, 지붕하중의 증가에 따른 구조해석을 실시하여 주구조부재의 $M_u/M_y$와 $M_u/M_p$의 변화를 검토하였다. 해석모델은 PEB구조 건물과 일반 H형강구조 건물을 대상으로 지붕하중을 증가시켜 구조해석을 실시하였다. 해석결과 해석모델의 지붕 설계하중의 약11% 증가할 경우, 주구조부재의 $M_u/M_y$가 1을 초과하였고, 약 36% 증가할 경우 작용모멘트가 소성모멘트보다 커져 부재의 파괴가 예상되었다. 중도리간격에 따른 지붕외장재가 지지할 수 있는 최대하중, KS기준에서 제시한 최대하중, 외장재생산업체의 시험값으로 산정한 최대하중을 비교하였다. 3가지 방법으로구한 패널이 지지할 수 있는 최대하중값은 주구조부재의 파괴가 예측되는 하중보다 큰 값을 나타내었다. 따라서 예상치 못한 지붕하중 증가로 인해 외장재의 파괴이전에 주구조부재의 파괴로 인한 구조물 전체 붕괴가 발생할 수 있으므로 안전성 확보를 위해서는 지붕외장재의 구조성능에 대한 정확한 정보의 필요성과 외장재 역시 구조설계대상임을 알 수 있었다.
사파이어 단결정은 LED 소자의 기판으로 널리 사용되고 있으며 현재 소재 수율을 향상시키기 위하여 6인치 이상의 대구경 웨이퍼를 만들기 위하여 많은 노력을 경주하고 있다. 단결정, 특히 반도체 단결정 웨이퍼에서($00{\cdot}1$), ($11{\cdot}0$) 등의 어떠한 결정학적인 방위(crystallographic orientation)가 표면과 이루는 각도, 즉 표면방위각(off-cut 또는 misorientation angle)의 크기와 방향은 제조된 LED 소자의 물성에 영향을 끼치므로 웨이퍼를 가공할 때 정확하게 컨트롤해야한다. 본 연구에서는 고분해능 X-선을 이용하여 표면이 결정학적 방향과 이루는 면방위각을 정밀하게 결정하는 측정법을 연구하였다. 본 연구에서는 기존의 ASTM 의 측정법과는 다른 원리를 이용하고 웨이퍼의 휨(bending)이나 측정고니오 회전축의 편심과 무관하게 표면방위각을 결정하는 새로운 이론적 모델을 제시하고 그 모델을 적용하여 표면의 수직축이 대구경 사파이어($00{\cdot}1$) 축과 이루는 표면방위각을 정확하게 측정 분석하였다. 그리고 이러한 측정방법의 장점을 이용하여 ASTM의 측정법과 면방위 측정 결과를 비교 분석 하였다. 150 mm 사파이어 웨이퍼를 ASTM의 방법으로 면방위를 측정하였을 때 고분해능 장비에서 회전축 ${\Phi}$의 기준을 다르게 설정함에 따라서 수직/수평 면방위 측정결과가 많은 차이를 보였다. 그러나 본 연구에서 사용한 측정법에서는 이러한 수직/수평 면방위의 값들이 거의 변화하지 않고 일정하게 나타나는 것을 확인 하였으며, 측정한150 mm 사파이어 웨이퍼의 표면방위각은 $0.21^{\circ}$이고 표면각이 나타나는 방향은 웨이퍼의 primary edge 방향으로부터 $1.2^{\circ}$벗어나 있는 방향이었다.
From the analysis of current density-luminance-voltage characteristics of the double layered device in ITO/N,N'-diphenyl-N-N'bis(3-methylphenyl)-1,1'biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/Al, we divided the conductive mechanism by four region according to applied voltage. We have obtained a coefficient of ${\beta}_{ST}$ in schottky region (I) is $4.14{\times}10^{-24}$ at the electric field of $3.2{\times}10^5$ V/cm, a slope in negative resistance region (II) appears negative properties decreasing the current density J for proportional in -1.58 square at a electric field of $7.3{\times}10^5$ V/cm. A coefficient of ${\beta}_{PF}$ in Poole-Frenkel region (III) is $8.28{\times}10^{-24}$ at the electric field of $8.4{\times}10^5$ V/cm, it was confirm어 that ${\beta}_{PF}$ is agrees with a value that relates with ${\beta}_{ST}$ such as ${\beta}_{PF}=2{\beta}_{ST}$ as the ${\beta}_{PF}$ and 2 ${\beta}_{ST}$ satisfied a theoretical prediction. And it was obtained a potential barrier of ${\Phi}_{FN}$ in Fower-Nordheim region(IV) is 0.3 eV at the electric field of $11.2{\times}10^5$ V/cm.
Purpose: This study was conducted to analyze the air flow characteristics in a plant factory with different inlet and outlet locations using computational fluid dynamics (CFD). Methods: In this study, the flow was assumed to be a steady-state, incompressible, and three-dimensional turbulent flow. A realizable k-${\varepsilon}$ turbulent model was applied to show more reasonable results than the standard model. A CFD software was used to perform the numerical simulation. For validation of the simulation model, a prototype plant factory ($5,900mm{\times}2,800mm{\times}2,400mm$) was constructed with two inlets (${\Phi}250mm$) and one outlet ($710mm{\times}290mm$), located on the top side wall. For the simulation model, the average air current speed at the inlet was $5.11m{\cdot}s^{-1}$. Five cases were simulated to predict the airflow pattern in the plant factory with different inlet and outlet locations. Results: The root mean square error of measured and simulated air current speeds was 13%. The error was attributed to the assumptions applied to mathematical modelling and to the magnitude of the air current speed measured at the inlet. However, the measured and predicted airflow distributions of the plant factory exhibited similar patterns. When the inlets were located at the center of the side wall, the average air current speed in the plant factory was increased but the spatial uniformity was lowered. In contrast, if the inlets were located on the ceiling, the average air current speed was lowered but the uniformity was improved. Conclusions: Based on the results of this study, it was concluded that the airflow pattern in the plant factory with multilayer cultivation shelves was greatly affected by the locations of the inlet and the outlet.
The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.