• 제목/요약/키워드: $^{89}Zr$

검색결과 66건 처리시간 0.023초

고온하에서 지르칼로이-4 튜브의 프레팅 마멸 특성 (The Fretting Wear Characteristics of Zircaloy-4 Tube at High Temperature)

  • 백승철;김태형;김석삼
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제33회 춘계학술대회 개최
    • /
    • pp.89-95
    • /
    • 2001
  • The fretting wear characteristics of Zircaloy-4 tube at room and high temperature were Investigated experimentally. In this study, the number of cycles, slip amplitude and temperature were selected as main factors of fretting wear. The results of this research showed that the wear volume Increased with the Increase of slip amplitudes and the number of cycles but decreased with temperature and the coefficient of friction were observed different tendency between room and high temperature. According to SEM(EDS) only gross slip were observed on the surface of both specimens and compacted oxide were on worn surfaces. XRO patterns showed that the crystallization of ZrO$_2$ were observed on the worn surface at high temperature. The fretting wear were Investigated due to oxidation and accumulation of plastic flow.

  • PDF

TEMPERATURE DEPENDENCE OF SPIN WAVE RESONANCE IN AMORPHOUS FILMS

  • Kim, Y.Y.;Baek, J.S.;Lee, S.J.;Lee, T.G.;Lim, W.Y.;Yu, S.C.;Lee, S.H.;Jang, P.W.
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.524-527
    • /
    • 1995
  • The temperature dependence of spin wave mode separation in amorphous $Co_{89.5}Zr_{10.5}$ thin film has been investigated at temperatures between 100 K and 300 K. The magnetization and the spectroscopic splitting factor were obtained for the main resonance mode in parallel and perpendicular magnetic field. ${\Delta}H_{2-3}$, the difference between resonance field of mode 2 and the resonance field of mode 3, increases with decreasing temperature. The linewidth increases for all the modes with decreasing temperature. Especially in mode 3 it increases rapidly below 200 K. This phenomenon could be caused by the increase of exchange stiffness constant or the decrease of surface magnetic anisotropy constant with decreasing temperature.

  • PDF

의성분지(義城盆地)에 분포(分布)하는 백악기(白堊紀) 경상누층군(慶尙累層群)의 셰일에 관(關)한 암석지구화학(岩石地球化學) (Petrogeochemistry of Shales in Cretaceous Gyeongsang Supergroup from the Euiseong Basin, Korea)

  • 이현구;이찬희;김상중
    • 자원환경지질
    • /
    • 제30권1호
    • /
    • pp.1-14
    • /
    • 1997
  • The shales from the Euiseong area are interbedded along the bedding in Cretaceous Gyeongsang Supergroup, which are composed mainly of quartz, plagioclase, K-feldspar and associated with trace amount of biotite, muscovite, chlorite, pyrite, hematite, carbonate and clay minerals. The ratio of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in shales from the Shindong Group are ranged from 9.16 to 24.32 and from 1.70 to 5.97, and the Hayang Group ranged from 2.76 to 8.89 and from 0.42 to 2.74, which are negative correlated between $K_2O/Na_2O$ and $Al_2O_3/Na_2O$ against $SiO_2/Al_2O_3$ respectively. Those are suggested that controlled of mineral compositions in shales due to substitution and migration of elements by sedimentation and diagenesis. These shale formation were deposited in basin of terrestrial environments originated from the igneous rocks, and the REE of these rocks are not influenced with diagenesis and hydrothermal alterations on the basis of $Al_2O_3$ versus La, La against Ce, Zr versus Yb, the ratios of La/Ce (0.43 to 0.62) and Th/U (1.11 to 10.71). The narrow range in trace and REE element characteristics as Co/Th (0.63 to 1.92), La/Sc (1.98 to 5.90), Sc/Th (0.58 to 1.30), V/Ni (0.90 to 3.25), Cr/V (0.45 to 1.78), Ni/Co (1.88 to 6.67) and Zr/Hf (30.04~60.87) of these shales argues for inefficient mixing of the simple source lithologies during sedimentation. These rocks also show much variation in $La_N/Yb_N$ (6.90 to 17.02), Th/Yb (4.17 to 13.68) and La/Th (1.98 to 5.90), and their origin is explained by derivation from a mixture of intermediate to acidic igneous rocks.

  • PDF

XRF 코어스캐너를 이용한 북동태평양 퇴적물 내 원소의 고해상분석 (High Resolution Elements Analysis in N-E Pacific Sediments using XRF Core Scanner)

  • 엄인권;김지훈;남승일;최헌수;박옥분
    • 한국광물학회지
    • /
    • 제22권2호
    • /
    • pp.129-138
    • /
    • 2009
  • 북동태평양 클라리온-클리퍼톤 지역에서 채취된 주상시료 내 원소의 수직적인 변화를 살펴보기 위하여 XRF 코어스캐너를 이용하여 주요원소(Al, Ca, Fe, Mn, Ti, Ba) 및 미량원소(Pb, Sr, V, Zr, Zn)를 2 mm 간격으로 분석하였다. XRF 코어스캐너의 분석 능력을 검증하기 위하여 동일 주상시료에서 부시료를 채취하여 ICP-AES 정량분석을 실시하였다. XRF 코어스캐너와 ICP-AES 측정값의 상관계수는 Mn ($r^2$ > 0.89)을 제외하면 대체적으로 낮다. 그러나 두 측정값의 수직적인 분포형태는 매우 유사하며 퇴적물 색상에 의해 분류된 퇴적상 변화와 거의 일치된다. Mn/Al 비는 각 퇴적상(Facies I, Facies II, Facies III)에서 뚜렷한 차이를 보인다. 그리고 각 퇴적상 경계가 뚜렷한 BC08-02-05와 BC8-02-13에서는 퇴적상에 따른 뚜렷한 Mn/Al 비의 변화가 보이나, 퇴적상 경계가 생물활동으로 점이적인 BC08-02-02, BC08-02-09 그리고 BC08-02-10에서는 점이적인 Mn/Al 비가 나타났다. 각 퇴적상의 원소 함량차이는 퇴적물내 산화-환원 환경 변화에 의해서 조절되며, 원소들의 수직적인 분포형태는 퇴적물내 생물활동에 영향을 받는 것으로 나타났다.

국내산 블렌딩 정유의 항산화 및 항염 효과 연구 (A study on antioxidant and anti-inflammatory effects of domestic blended essential oils)

  • 정숙희;이은경
    • 한국응용과학기술학회지
    • /
    • 제38권6호
    • /
    • pp.1370-1382
    • /
    • 2021
  • 국내산 소재를 이용한 단일 추출물의 안전성 실험 및 화장품 소재로써의 선행 연구는 실시되어 왔지만, 개별 추출하여 식물의 특성을 극대화 및 효과 간섭 가능성에 대한 복합 혼합물에 대한 연구가 미비한 상황이다. 이에 본 연구는 배초향, 적송, 강황, 생강, 산미나리씨, 불수감에 대한 정유 추출에 따른 GC-MSD, 블렌딩 오일의 세포독성, 항산화, 항염을 확인하여 화장품 소재로서의 가능성을 확인하였다. GC-MSD 향기성분을 분석한 결과 주요 성분으로는 배초향은 Estragole, 적송은 à-Pinene, 강황과 생강은 Zingiberene, 산미나리씨 Anethole, 불수감 D-Limonene이 동정되었다. 세포독성이 확인되지 않은 100 uL/mL의 농도에서 NO 생성 70.62% 억제, DPPH 라디칼 소거능 64.03%, ABTS 라디칼 소거능 89.55%을 보였다. 이를 통하여 블렌딩 정유는 화장품 및 식품, 의약품 산업 분야에서 항산화 및 항염 효능이 있는 원료로서 유용하게 활용할 수 있는 가능성을 제시하였다.

졸-침투와 감광성 직접-패턴 기술을 이용하여 스크린인쇄된 Pb(Zr,Ti)O3 후막의 하이브리드 제작 (Hybrid Fabrication of Screen-printed Pb(Zr,Ti)O3 Thick Films Using a Sol-infiltration and Photosensitive Direct-patterning Technique)

  • 이진형;김태송;박형호
    • 마이크로전자및패키징학회지
    • /
    • 제22권4호
    • /
    • pp.83-89
    • /
    • 2015
  • 본 논문에서는 졸-침투와 직접-패턴 공정을 이용하여 향상된 압전 후막의 전기적 특성과 우수한 패터닝 특성을 동시에 만족할 수 있는 제작 방법을 제시한다. 저온(< $850^{\circ}C$) 공정 후 후막의 고밀도 및 직접-패턴의 목적을 달성하기 위해서, 감광성 티탄산 지르콘산 연 ($Pb(Zr,Ti)O_3$, PZT) 졸을 스크린인쇄된 PZT 후막 내부로 침투시켰다. 직접-패턴된 PZT막은 포토크롬마스크와 UV 조사에 의해서 일정한 간격으로 인쇄된 후막 위에 성공적으로 형성되었다. 스크린인쇄된 후막은 분말형태의 기공성 구조를 갖고 있어 조사된 UV빛이 산란되기 때문에, 감광성 졸-침투 공정을 할 때 PZT 후막의 특성을 증가시키기 위한 공정의 최적화가 필요하다. 침투된 감광성 PZT 졸의 농도, 조사된 UV 시간 및 용매 현상 시간을 최적화한 결과, 0.35 M의 PZT 농도, 4 분의 UV 조사시간과 15 초의 용매 현상시간으로 졸-침투된 PZT 후막은 $800^{\circ}C$ 소결 온도에서 입자들의 성장에 의해 치밀화 정도가 증가되었다. 또한 PZT후막의 강유전 특성(잔류분극 및 항복 전압)도 향상되었다. 특히 잔류분극값은 스크린인쇄된 후막보다 약 4배정도 증가되었다. 이렇게 제작된 후막은 어레이타입의 압전형 마이크로미터크기의 센서 및 액츄에이터 등에 응용 가능성을 제시할 수 있었다.

광주지역 하상퇴적물에 대한 지질집단별 지구화학적 연구 (Geochemical Study on Geological Groups of Stream Sediments in the Gwangju Area)

  • 김종균;박영석
    • 자원환경지질
    • /
    • 제38권4호
    • /
    • pp.481-492
    • /
    • 2005
  • 이 연구에서는 광주지역 하상퇴적물에 대한 지질집단별 지구화학적 특성에 대해 규명 하고자 한다. 이를 위해 물이 흐르고 있는 1차 수계를 대상으로 하상퇴적물시료 104개를 채취하였고, 실험실에서 자연건조 시켰다. 화학분석을 위한 시료는 알루미나 몰타르를 이용하여 200메쉬 이하로 분쇄하였고, XRF ICP-AES, NAA분석을 실시하였다. 연구지역 하상퇴적물에 대해, 지질집단별 지구화학적 특성 비교와 기존 암석에 대한 연구에서 얻어진 암석화학적인 특성과의 비교를 위해, 선캠브리아기 화강편마암 지역, 쥬라기 화강암 지역, 백악기 화순안산암 지역으로 분리하였다 광주지역 하상퇴적물의 주성분원소 함량은 $SiO_2\;51.89\~70.63\;wt.\%,\;Al_2O-3\;12.91\~21.95\;wt.\%,\;Fe_2O_3\;3.22\~9.89\;wt.\%,\;K_2O\;1.85\~4.49\;wt.\%,\;MgO\;0.68\~2.90\;wt.\%,\;Na_2O\;0.48\~2.34\;wt.\%,\;CaO\;0.42\~6.72\;wt.\%,\;TiO_2\;0.53\~l.32\;wt.\%,\;P_2O_5\;0.06~0.51\;wt.\%\;and\;MnO\;0.05\~0.69\;wt.\%.$이다. 하상퇴적물과 암석에 대한 AMF 삼각도에서, 암석은 칼크-알칼리계열에 도시되는데 비하여, 하상퇴적물은 솔레아이트 계열과 칼크-알칼리계열의 경계부위에 도시된다. 이는 $Fe_2O_3$ 함량이 암석에서보다 하상퇴적물에 더 많이 함유되어 있는 것과 관련이 있는 것으로 보인다. $SiO_2$에 대한 $K_2O+Na_2O$의 비교그림에서, 하상퇴적물은 암석에서와 같이 subalkaline 계열에 점시된다. 하상퇴적물의 미량성분원소 및 희토류 원소 함량은 $Ba 590\~2170ppm$, Be$1\~2.4$ppm, Cu $13\~179ppm$, Nb $20\~34ppm$, Ni$10\~50ppm$, Pb $17\~30$ppm, Sr $70\~1025$ ppm, V$42\~135$ ppm, Zr$45\~171$ ppm, Li$19\~77$ppm, Co$4.3\~19.3$ppm, Cr$28\~131$ppm, Cs$3.1\~17.6$ ppm, Hf $5\~27.6$ ppm, Rb $388\~202$ ppm, Sb$0.2\~l.2$ ppm, Sc$6.4\~17$ ppm, Zn $47\~389$ ppm, Pa $8.8\~68.8$ ppm, Ce$62\~272$ppm, Eu$1\~2.7$ppm and Yb$0.9\~6$ppm의 범위를 보인다.

Simple measurement the chelator number of antibody conjugates by MALDI-TOF MS

  • Shin, Eunbi;Lee, Ji Woong;Lee, Kyo Chul;Shim, Jae Hoon;Cha, Sangwon;Kim, Jung Young
    • 대한방사성의약품학회지
    • /
    • 제3권2호
    • /
    • pp.54-58
    • /
    • 2017
  • Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry(MALDI-TOF MS) is one of the powerful methods that enable analysis of small molecules as well as large molecules up to about 500,000 Da without severe fragmentation. MALDI-TOF MS, thus, has been a very useful an analytical tool for the confirmation of synthetic molecules, probing PTMs, and identifying structures of a given protein. In recent nuclear medicine, MALDI-TOF MS liner ion mode helps researcher calculate the average number of chelator(or linkage) per an antibody conjugate, such as DOTA-(or DFO-) trastuzumab for labeling a medical radioisotope. This simple technique can be utilized to improve the labeling method and control the quality at the development of antibody-based radiopharmaceuticals, which is very effected to diagnosis and therapy for in vivo tumor cells, with radioisotopes like $^{89}Zr$, $^{64}Cu$, and 177Lu. To minimize the error, MALDI-TOF MS measurement is repeatedly performed for each sample in this study, and external calibration is carried out after data collection.

An SOFC Cathode Composed of LaNi0.6Fe0.4O3 and Ce(Ln)O2 (Ln=Sm, Gd, Pr)

  • Chiba, Reiichi;Komatsu, Takeshi;Orui, Himeko;Taguchi, Hiroaki;Nazawa, Kazuhiko;Arai, Hajime
    • 한국세라믹학회지
    • /
    • 제45권12호
    • /
    • pp.766-771
    • /
    • 2008
  • We fabricated single cells with a cathode consisting of a $LaNi_{0.6}Fe_{0.4}O_3-Ce_{0.8}Sm_{0.2}O_{1.9}$ composite (LNF-S20DC composite) active layer and an LNF current collecting layer on a ${0.89ZrO_2}-{0.10Sc_2}{O_3}-0.01{Al_2}{O_3}$ electrolyte sheet. The cathode layers were prepared by the screen-printing method. The cathode properties of these cells were measured by the AC impedance method at $800^{\circ}C$. The cathodes with the ceria-LNF composite active layer exhibited high power performance prior to current loading. We investigated the influence of the mixture ratio of LNF and S20DC on the cathodes properties. The Sm in the ceria particles of the composite cathode was substituted with other rare-earth elements. Cathodes with Pr and Gd co-doped ceria in the active layer provided the better performance than those with Sm- or Gd-doped ceria.

Electrochemical Performance of LSCF Cathode with GDC lnterlayer on ScSZ Electrolyte

  • Hwang, Hae-Jin;Moon, Ji-Woong;Lim, Yongho;Lee, Seunghun;Lee, Eun-A
    • 한국세라믹학회지
    • /
    • 제42권12호
    • /
    • pp.787-792
    • /
    • 2005
  • A symmetrical LSCF $(La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta})\;ScSZ(89ZrO_2-10Sc_2O_3-1CeO_2)/LSCF$ electrochemical cell with a GDC (Gadolinium-Doped Ceria, $90CeO_2-10Gd_2O_3$) interlayer that was inserted between the LSCF cathode and ScSZ electrolyte was fabricated, and the electrochemical performance of these cells was evaluated. The GDC interlayer was deposited on a ScSZ electrolyte using a screen-printing technique. The GDC interlayer prevented the unfavorable solid-state reactions at the LSCF/ScSZ interfaces. The LSCF cathode on the GDC interlayer had excellent electrocatalytic performance even at $650^{\circ}C$. The Area Specific Resistance (ASR) was strongly dependent on the thickness and heat-treatment temperature of the GDC interlayer. The impedance spectra showed that the cell with a $15\~27{\mu}m$ thick GDC interlayer heat-treated at $1200^{\circ}C$ had the lowest ASR.