• 제목/요약/키워드: $^{197}Au$

검색결과 18건 처리시간 0.022초

Au-Sn 공정 접합을 이용한 RF MEMS 소자의 Hermetic 웨이퍼 레벨 패키징 (Application of Au-Sn Eutectic Bonding in Hermetic Rf MEMS Wafer Level Packaging)

  • ;김운배;좌성훈;정규동;황준식;이문철;문창렬;송인상
    • 마이크로전자및패키징학회지
    • /
    • 제12권3호
    • /
    • pp.197-205
    • /
    • 2005
  • RF MEMS 기술에서 패키지의 개발은 매우 중요하다. RF MEMS 패키지는 소형화, hermetic 특성, 높은 RF 성능 및 신뢰성을 갖도록 설계되어야 한다. 또한 가능한 저온의 패키징 공정이 가능해야 한다. 본 연구에서는 저온 공정을 이용한 RF MEMS 소자의 hermetic 웨이퍼 레벨 패키징을 제안하였다. Hermetic sealing을 위하여 약 $300{\times}C$의 Au-Sn 공정 접합 (eutectic bonding) 기술을 사용하였으며, Au-Sn의 조합으로 형성된 sealing부의 폭은 $70{\mu}m$이었다. 소자의 전기적 연결을 위하여 기판에 수직 via hole을 형성하고 전기도금 (electroplating) 방법을 이용하여 Cu로 채웠다. 완성된 RF MEMS 패키지의 최종 크기는 $1mm\times1mm\times700{\mu}m$이었다. 패키징 공정의 최적화 및 $O_2$ 플라즈마 애싱 공정을 통하여 접합 계면 및 via hole의 void들을 제거할 수 있었다. 또한 패키지의 전단 강도 및 hermeticity는 MIL-STD-883F의 규격을 만족하였으며 패키지 내부에서 오염 및 기타 유기 물질은 발생하지 않았다. 패키지의 삽입 손실은 2 GHz에서 0.075 dB로 매우 작았으며, 여러 종류의 신뢰성 시험 결과 패키지의 파손 및 성능의 감소는 발견되지 않았다.

  • PDF

Copper neutron transport libraries validation by means of a 252Cf standard neutron source

  • Schulc, Martin;Kostal, Michal;Novak, Evzen;Simon, Jan
    • Nuclear Engineering and Technology
    • /
    • 제53권10호
    • /
    • pp.3151-3157
    • /
    • 2021
  • Copper is an important structural material in various nuclear energy applications, therefore the correct knowledge of copper cross sections is crucial. The presented paper deals with a validation of different copper transport libraries by means of activation of selected samples. An intense 252Cf(sf) source with a reference neutron spectrum was used as a neutron source. After irradiation, the samples were measured using a high purity germanium detector and the dosimeter reaction rates were inferred. These experimental data were compared with MCNP6 calculations using CENDL-3.1, JENDL-4.0, ENDF/B-VII.1, ENDF/B-VIII.0, JEFF-3.2 and JEFF-3.3 evaluated Cu transport libraries. The experiment specifically focuses on 58Ni(n,p)58Co, 93Nb(n,2n)92mNb, 197Au(n,g)198Au and 55Mn(n,g)56Mn dosimetry reactions. Evaluated activation cross sections of these dosimetric reactions were taken from the IRDFF-II library. The best library performance depends on the energy region of interest.

한국 중생대 화강암류와 이에 수반된 금-은광화작용 (Mesozoic Granitoids and Associated Gold-Silver Mineralization in Korea)

  • 최선규;박상준;최상훈;신홍자
    • 자원환경지질
    • /
    • 제34권1호
    • /
    • pp.25-38
    • /
    • 2001
  • 한반도 금은광화작용은 중생대 대보화성활동(약 200~130 Ma)과 불국사화성활동(약 120~60 Ma)의 관입시기에 따라 다양한 지질환경에서 형성된 상이한 금속비의 광상이 배태되고 있으며, 각각 서로 다른 정치깊이를 반영하여 광상성인적 유형뿐만 아니라 시 공간적 분포를 보이고 있다. 맥의 산상, 광물학적, 유체포유물 및 동위원소 연구결과에 의하면, 쥬라기 광상은 성인적으로 페그마타이트와 밀접한 연관성을 보이며, 낮은 금은비(Ag/Au ratio)의 금단일형 광상(197~127 Ma)으로 비교적 단순한 광물조합과 높은 금함량의 에렉트럼이 산출된다. 이러한 유형의 광상은 심부기원의 전형적인 괴상 단성맥의 구조를 보이며, 심부(>3.0kb)의 환경조건에서 마그마 기원의 고온성 광화 유체(약 300~45$0^{\circ}C$, $\delta$$^{18}$ O; 5~10$\textperthousand$)로부터 $CO_2$비등현상과 황화작용의 침전 메카니즘에 의해서 형성되었다. 반면, 백악기 금-은광상들은 주로 전형적인 복성맥의 구조를 보이고, 비철금속의 황화광물이외에도 다양한 함은.함은황염 광물조합에 기인한 높은 금은비의 금은혼합형 광상(108~71 Ma) 또는 은단일형 광상(98~71 Ma)으로 산출된다. 이러한 유형의 광상들은 천부의 지질환경(<1.0 kb)에서 지표수의 혼입에 따른 순환수 기원의 비교적 낮은 온도 광화유체(약 200~35$0^{\circ}C$, $\delta$$^{18}$ O; -10~5$\textperthousand$)로부터 비등 및 냉각작용에 의한 복합적인 침전 메카니즘으로 형성되었다. 즉, 쥬라기 금단일형 광상에 속하는 태창 보련 삼황학 대흥광산은 전형적인 심열수~중열수광상으로, 백악기 금은혼합형 광상에 속하는 무극 금왕 금봉 덕음광산과 백악기 은단일형 광상에 속하는 전주일 월유 은적광산은 중열수~천열수광상으로, 가사도광산은 전형적인 화산성 저유황형 천열수광상으로 각각 구분된다. 중생대 대보 화성암체와 불국사 화성암체의 지구조적 특성에 따른 정치심도의 차이는 광화유체의 온도, 압력, 조성 및 기원뿐만 아니라, 유체의 진화과정 및 금-은 광물의 침전 메카니즘을 좌우하며, 결과적으로 금-은광상의 금속비에 직접적인 영향을 준 것으로 해석된다.

  • PDF

산소 분위기에서 열처리시 ZnS 나노선의 발광 강도 변화 (Enhancement of Photoluminescence Intensity of ZnS Nanowires by Annealing in O2)

  • 권진업;이종우
    • 한국표면공학회지
    • /
    • 제45권5호
    • /
    • pp.193-197
    • /
    • 2012
  • The influence of annealing process in an $O_2$ atmosphere on the photoluminescence (PL) spectra properties of ZnS nanowires has been investigated. ZnS nanowires with the diameters approximately 100 nm and the lengths a few tens micrometers were synthesized by evaporating ZnS powders on Si substrates while using an Au thin film as a catalyst. ZnS nanowires had an NBE emission band at 430 nm in the violet region. The emission intensity was improved drastically by a process in which ZnS nanowires were heat-treated at $500^{\circ}C$ in an $O_2$ atmosphere for 45 minutes.

ZnTe:O/CdS/ZnO intermediate band solar cells grown on ITO/glass substrate by pulsed laser deposition

  • Lee, Kyoung Su;Oh, Gyujin;Kim, Eun Kyu
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.197.2-197.2
    • /
    • 2015
  • Low-cost, high efficiency solar cells are tremendous interests for the realization of a renewable and clean energy source. ZnTe based solar cells have a possibility of high efficiency with formation of an intermediated energy band structure by impurity doping. In this work, the ZnTe:O/CdS/ZnO structure was fabricated by pulsed laser deposition (PLD) technique. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnTe target, whose density of laser energy was 4.5 J/cm2. The base pressure of the chamber was kept at a pressure of approximately $4{\times}10-7Torr$. ZnO thin film with thickness of 100 nm was grown on to ITO/glass, and then CdS and ZnTe:O thin film were grown on ZnO thin film. Thickness of CdS and ZnTe:O were 50 nm and 500 nm, respectively. During deposition of ZnTe:O films, O2 gas was introduced from 1 to 20 mTorr. For fabricating ZnTe:O/CdS/ZnO solar cells, Au metal was deposited on the ITO film and ZnTe:O by thermal evaporation method. From the fabricated ZnTe:O/CdS/ZnO solar cell, current-voltage characteristics was measured by using HP 4156-a semiconductor parameter analyzer. Finally, solar cell performance was measured using an Air Mass 1.5 Global (AM 1.5 G) solar simulator with an irradiation intensity of 100 mW cm-2.

  • PDF

솔라보트 프로토타입 제작에 관한 연구 (A Study on the Construction of a Solar Boat Prototype)

  • 홍신표;이경완;전호환
    • 대한조선학회논문집
    • /
    • 제44권2호
    • /
    • pp.189-197
    • /
    • 2007
  • In this paper a study on the construction of a solar boat prototype is presented. Basic components of solar boats and the construction of a simple solar boat prototype by undergraduate students are described. Main purposes of this study are to examine the feasibility of developing commercial solar boats and to evaluate the effect of solar boat construction on the education of students. A low-cost solar boat prototype is constructed by assembling parts available in the market or laboratory. From the prototype construction experience, students obtained basic knowledge on the design and construction of commercial or racing solar boats. In addition, it is shown that the construction of a solar boat can be au effective educational program to expose students to practical multidisciplinary study involving naval architecture, ocean engineering, mechanical engineering, electrical and electronics engineering.

구봉 금-은 광상일대 시추코아(04-1)에서 산출되는 함 티타늄 광물들의 산상과 화학조성 (Occurrence and Chemical Composition of Ti-bearing Minerals from Drilling Core (No.04-1) at Gubong Au-Ag Deposit Area, Republic of Korea)

  • 유봉철
    • 광물과 암석
    • /
    • 제36권3호
    • /
    • pp.185-197
    • /
    • 2023
  • 구봉 금-은 광상은 선캠브리아기의 변성퇴적암류내에 발달된 열극대를 충진한 8개조의 석영맥으로 구성된 조산형과 intrusion-related형이 혼합된 광상으로 과거 한국에서 가장 큰 금-은 광상들 중의 하나였다. 대한광업진흥공사는 이 광상의 남부에서 시추(90-12)를 통한 심도 -728 ML에서 27.9 g/t Au 품위를 갖는 0.9 m 폭을 갖는 석영맥(6호맥)을 착맥하였으며 2004년 재차 6호맥의 재개발 가능성 검토를 위해 시추(04-1)를 수행하였다. 2004년 시추 현장에서 모암, 모암변질 및 석영맥 시료들(04-1)을 채취하여 함 티타늄 광물들(티탄철석, 금홍석)의 산상과 화학조성을 연구하였다. 심도 -275 ML의 광화대에서 관찰되는 금홍석은 모암변질대에서 칼리장석, 흑운모, 석영, 방해석, 녹니석 및 황철석과 함께 산출된다. 심도 -779 ML의 광맥(6호맥)에서 관찰되는 티탄철석과 금홍석은 모암변질대와 석영맥에서 백색운모, 녹니석, 인회석, 저어콘, 석영, 방해석, 자류철석 및 황철석과 함께 산출된다. 이들 광물조합을 토대로, 금홍석은 열수 용액에 의한 모암내 Ti을 풍부하게 함유한 흑운모의 열수변질작용(녹니석화작용) 시 형성된 것으로 생각된다. 티탄철석은 최대 0.09 wt.% (HfO2), 0.39 wt.% (V2O3), 0.54 wt.% (BaO) 함량이 함유되어 있다. 심도 -275 ML과 -779 ML에서 산출되는 금홍석의 화학조성을 비교하면, 심도 -779 ML의 광맥(6호맥)의 금홍석에서 WO3, FeO 및 BaO 원소들의 함량이 높다. 이들 미량원소들은 심도 -275 ML의 금홍석 Ba2+ + Al3+ + Hf4+ + (Nb5+, Ta5+) ↔ 3Ti4+ + Fe2+, 2V4+ + (W5+, Ta5+, Nb5+) ↔ 2Ti4+ + Al3+ + (Fe2+, Ba2+), Al3+ + V4+ + (Nb5+, Ta5+) ↔ 2Ti4+ + 2Fe2+, 심도 -779 ML의 금홍석 2(Fe2+, Ba2+) + Al3+ + (W5+, Nb5+, Ta5+) ↔ 2Ti4+ + (V4+, Hf4+), Fe2+ + Al3+ + Hf4+ + (W5+, Nb5+, Ta5+) ↔ 2Ti4+ + V4+ + Ba2+로써 치환관계가 있었다. 이들 자료와 기 연구된 조산형 금 광상에서 산출되는 함 티타늄 광물들의 화학조성과 비교 검토 본 결과, 구봉 광상의 금홍석들은 다른 조산형 금 광상(운산 광상, Kori Kollo 광상, Big Bell 광상, Meguma 함 금 석영맥)들에서 산출되는 금홍석들보다 상대적으로 산화 환경에서 형성되었음을 알 수 있다.

백운 금-은광상에서 산출되는 광석광물과 생성환경 (Ore minerals and Genetic Environments from the Baekun Gold-silver Deposit, Republic of Korea)

  • 유봉철;이현구;김기중
    • 자원환경지질
    • /
    • 제39권1호
    • /
    • pp.9-25
    • /
    • 2006
  • 백운 금-은광상은 트라이아스기 또는 쥐라기의 엽리상화강섬록암내에 발달된 단층대를 충진한 천열수성 석영맥광상이다. 이 광상의 광화작용은 단층-각력대에 수반되며 2시기로 구분된다. I시기는 다시 조기와 말기로 구분되며 주된 광화시기이다. II시기는 광화작용이 관찰되지 않는다. I시기 소기는 모암변질과 유비철석, 황철석, 자류철석, 섬아연석, 백철석, 황동석, 황석석 및 방연석이 관찰된다. I시기 말기는 금-은광물정출시기로 일렉트럼, 함은사면동석, 스테파나이트, 보울란제라이트, 농홍은석, 휘은석 , 시르메라이트, 자연은, Ag-Te -Sn-S계 광물, Ag-Cu-S계 광물, 황철석, 황동석 및 방연석이 관찰된다. 유체포유물 자료에 의하면, 광화 I시기의 균일화온도와 염농도는 각각 $171.6\~360.8^{\circ}C,\;0.5\~10.2\;wt.\%$로써 광화유체가 천수의 혼입에 의한 냉각과 희석이 있었음을 지시한다. 또한, 광화 I시기에 관찰되는 광물공생군으로부터 구한 생성온도(조기: $236\~>380^{\circ}C$, 말기: $<197\~272^{\circ}C$)와 황분압(조기: $>10^{-7.8}\;atm.,$ 말기: $10^{-14.2\~10^{-16}\;atm.$)이 광화작용이 진행됨에 따라 감소되어 진다. 황($2.4\~6.1\%_{\circ}$(조기=$3.4\~5.3\%_{\circ}$, 말기=$2.4\~6.1\%_{\circ}$)), 산소($4.5\~8.8\%_{\circ}$(석영: 조기=$6.3\~8.8\%_{\circ}$, 말기=$4.5\~5.6\%_{\circ}$)), 수소($-96\~-70\%_{\circ}$(석영: 조기=$-96\~-70\%_{\circ}$, 말기=$-78\~-74\%_{\circ}$, 방해석: 말기=$-87\~-76\%_{\circ}$)) 및 탄소($-6.8\~-4.6\%_{\circ}$(방해석: 말기)) 동위원소 값의 자료로 볼 때, 이 광상의 광화유체는 마그마 기원의 유체가 주종을 이룬 것으로 보이며 광화작용이 진행됨에 따라 기원이 다른 천수의 혼입이 작용한 것으로 해석할 수 있다.