• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.9
• /
• pp.1193-1197
• /
• 2007

The purpose of this study was to find the optimal mixing condition of Rubus coreanus extracts, Rubus coreanus powder, and Rubus coreanus flavor for preparation of the Bokbunja chocolate. The physico-chemical characteristics of the Bokbunja chocolate were analyzed and evaluated. The sugar concentration of the Bokbunja chocolate had a tendency to increase as the addition of Rubus coreanus extracts decreased, but there was no significant differences. The hardness was increased with the decreasing Rubus coreanus extracts and increasing Rubus coreanus powder. The L (lightness) value increased with increasing Rubus coreanus extracts and decreasing Rubus coreanus powder, whereas a (redness) and b (yellowness) values increased by Rubus coreanus powder addition. The optimum mixing condition for the Bokbunja chocolate was decided by sensory evaluation. According to the results of sensory flavor, color, sweetness, texture and overall acceptability, the Bokbunja chocolate which was added Rubus coreanus extracts 30 g, Rubus coreanus powder 5 g, Rubus coreanus flavor 0.3 g obtained the best score overall.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.6
• /
• pp.267-271
• /
• 2009

Multicomponent transparent conducting oxide films were deposited on glass substrates at 150 by dual magnetron sputtering of AZO and ITO targets. In the case of mixing a limited amount of ITO (10W), resistivity of TCO films was significantly increased compared to the AZO film; from $3.5{\times}10^{-3}$ to $9.7{\times}10^{-3}{\Omega}{\cdot}cm$. Deterioration of the electrical conductivity is attributed to the decreases in carrier concentration and Hall mobility. Improvement of the conductivity could be obtained for the films prepared with ITO powers larger than 40 W. The lowest resistivity ($\rho$) of $7.3{\times}10^{-4}{\Omega}{\cdot}cm$ was achieved when ITO power was 100 W. Effects of $H_2$ incorporation on the electrical and optical properties of AZO-ITO films were investigated in this work. Addition of small amount of hydrogen resulted in the increase of carrier concentration and the improvement of electrical conductivity. It is apparent that the roughness of AZO-ITO films decreases dramatically after the transition of microstructure from polycrystalline to amorphous phase, which gives practical advantages such as an excellent uniformity of surface and a high etching rate. AZO-ITO films grown at sputtering ambient with hydrogen gas are expected to be applicable to optoelectronic devices such as organic light emitting diodes and flexible displays due to their sufficient electrical and structural properties.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.802-808
• /
• 1996

Silicic acid(SA) was extracted with organic solvents from aqueous sodium silicate solutions acidified with dilute sulfuric acid. Tetrahydrofuran(THF), isopropyl alcohol and acetone were used as organic solvents. The extraction degree of Si and the removal efficiency of Na is determined according to kinds of solvent and the mixing ratios of solvent, sodium chloride and $H_2O$. Optimum conditions for the preparation of high purity SA were THF as an organic solvent, volume ratio of organic solvent/SA : 1 (organic solvent 10ml/10ml SA) and the amount of NaCl addition 2.5g/10ml SA. The extraction degree of Si and the removal efficiency of Na at that point were 86.2% and 99.95% respectively and the purity of SA was 99.96%.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.52-52
• /
• 2011

PLA 섬유는 폴리머의 주성분이 옥수수에서 추출한 모노머를 중합한 화학섬유가 아닌 인체친화적인 식물성 소재이며 생분해성이 좋은 친환경 소재로 최근 주목받고 있는 섬유소재이다. 본 연구에서는 아토피완화용 여러 섬유 구조체 개발에서 사용되는 섬유소재중 PLA 원사에 항균성 물질을 혼입하여 PLA 항균사 제조를 위한 연구를 수행하였다. PLA Grade의 점도가 낮아질수록 Grade별 용융 지수값은 차이를 나타내지만 방사온도 $230^{\circ}C$를 변곡점으로 하여 용융점도가 급격히 변하였으며, 특히 방사온도 $240^{\circ}C$의 경우 용융지수가 100을 넘어가고 폴리머의 색깔이 황갈색을 띄어 폴리머의 열분해가 많이 일어났을 것으로 판단되었다. PLA의 적정 방사온도 구간은 $210{\sim}225^{\circ}C$ 구간이 최적이며 그 이상에서는 Color 변화 및 물성 저하가 나타나는 것으로 판단되었다. 항균성 PLA 섬유를 제조하기 위하여 피톤치드계 유기항균제를 이용하였으며, 피톤치드에 기능성 엘라스토머를 사용하여 Capsulation을 진행하였다. 이러한 유기항균제 Powder의 경우 비중이 낮아 표면적로 인하여 마스터배치 칩을 만드는 공정에서 잘 혼합되지 않는 문제점이 발생하였으나, 피톤치드의 함량을 조절하여 PLA와의 마스터배치 칩 제조를 시험하였다. 압출온도와 토출량, Screw 조건(Mixing, Zone)을 시험하여 적정 조건을 설정하였다. 항균사 PLA 섬유는 Sheath/Core 복합방사 형태와 단독사 형태의 2가지 Type을 제조하였다. Sheath/Core 복합방사 폴리머 구성은 Sheath부에 PLA항균사, Core부에 PLA 또는 저융점 PET를 사용하였다. Core부의 폴리머는 제사성에 큰 영향을 미치지 않았으나, 항균 마스터배치의 함량이 증가할수록 Pack압 상승이 급격히 일어나는 단점이 나타났다. 항균제 5% 정도가 혼입되어 있는 경우에 2.1 이상의 정균활성치와 99.8% 정도의 정균감소율 성능을 나타내었다. PLA 단독사의 경우, 항균제 최적 함량은 3% 이상으로 정균활성치 5.5 이상, 정균감소율 99.9%의 우수한 항균특성을 나타내었다.

• Korean journal of food and cookery science
• /
• v.24 no.2
• /
• pp.243-250
• /
• 2008

This study examined the quality characteristics of soybean pastes that were prepared using different ratios of whole soybean meju inoculated with three different types of microbial strains. The five samples were prepared with meju inoculated with Aspergillus oryzae KFRI 995, Bacillus subtilis F4005, mixture with A. oryzae KFRI 995 and B. subtilis F2315, mixture with A. oryzae KFRI 995 and B. subtilis F4005, and mixture using all three strains, respectively. Over two months of fermentation, pH gradually decreased, whereas total acidity increased. And across samples and fermentation periods, there were no considerable changes in moisture or crude protein. In all five samples, amino-type nitrogen levels increased approximately 2- to 3-fold as compared to initial levels; the sample inoculated with A. oryzae KFRI 995 showed the highest level (205.2 mg%) of amino-type nitrogen. Throughout fermentation, the five samples displayed differences in their reducing sugar levels according to the inoculated microorganisms. The lowest level of lightness and highest level of redness occurred in the sample inoculated with B. subtilis F2315 showed a lowest level in lightness and a highest level of redness, indicating a strong browning reaction. Finally, the samples inoculated with A. oryzae KFRI 995 and B. subtilis F4005, respectively, showed had similarly high preference scores as compared to the other samples.

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.257-263
• /
• 2006

This experiment was conducted to investigate the optimal media for 'Pechika' ever-bearing strawberry grown in hydroponic culture system in summer highland. Three mixed media (1:1, v/v) of peatmoss with perlite, rice hull, and granular rockwool, and four solution strengths of EC 0.5, 0.75, 1.0 and $1.25 dS{\cdot}m^{-1}$ were tested. Root zone temperature in peatmoss+perlite media was 1 to $3^{\circ}C$ lower than in the other media. The culture medium of mixing to peat moss and perlite was most effective in producing good yield and fruit quality. The culture medium of mixing to peat moss and perlite was the highest about 1,632kg/10a to yield yearly average, but was very undulating 732 kg/10a to yield in 2004 year and 3,013kg/10a in 2003 year. The deformed fruits were increased when the solution strength was increased, especially in EC $1.25dS{\cdot}m^{-1}$. The soluble solids and the acidity content of fruits were increased with higher solution strength regardless of media. The uptake of Ca and Mg was inhibited at higher solution strength, and the uptake of N, P and K was promoted. Therefore, the culture medium of mixing to peat moss and perlite was the most suitable culture medium to product strawberry in summer, because it had the highest yield even though fruit quality among treatments was not significant.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.437-446
• /
• 1998

The general pattern of the hydrographic conditions and tidal front of the northern coastal area of Cheju Island is investigated using the CTD observation data and a stratification parameter V ($J/m^3$) in $1991\~1993$. 1. The sea water of the northern coastal area of Cheju Island has a lower temperature and higher salinity than that in the central area of the Strait, and local temperature and salinity fronts appears frequently around this area. It seems that they are caused by the upwelling and the tidal front as well as a local topography. 2. A saddle-like distribution of temperature and salinity is formed in the Cheju Strait almost every month with relation to mixing of the different water masses. 3. In the northern coastal area of Cheju Island the stratification parameter V ($J/m^3$) was ranged from 8.4 to 209.8 $J/m^3$ in June, 201.9 to 634.9 $J/m^3$ in August, 0.18 to 680 $J/m^3$ in September, and $2.7\~462\;J/m^3$ in October, respectively. The tidal front was often formed around the place where the horizontal variation of the depth is very large and the potential energy with 10$J/m^3$ appears roughly along 50 m isobath.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.473-476
• /
• 2008

Due to the pursuit of high function and international price increase in the field of construction, the application of the secondary product using cement is on the increase gradually in the construction industry in the pursuit of economic cost reduction by the shortening of the construction time like Expediting and the dry construction method at the same time. However, it is in very urgent situation of measures to improve the structural performance or durable performance because it is limited for use in terms of panel in interior exterior building or functional repair reinforce as yet. Accordingly, this study is to investigate applicability of permanent Formwork like mould with the structural performance or excellent durable performance in the field of construction, and to derive optimum mixture in the performance and quality of manufacture. As a result of analysis comparison with the dynamic and durable properties of vacuum extrusion molding high toughness cement panel according to the mixture of four conditions, this study has found that the test body of mixing ECC-DP3 using small filler and large granulated blast furnace slag and powder flame retardant had excellent relative hardness and bending stress strain. The durable performance has shown excellent tendency by the decrease of porosity and enhancement of water-tightness.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.59-75
• /
• 2012

The species composition of plankton is essential to understand the material and energy cycling within marine ecosystem. It also provides the useful information for understanding the properties of marine environments due to its sensitivity to the physicochemical characteristics and variability of water masses. In this study we adopted metagenomics to evaluate eukaryotic plankton species diversity from coastal waters off Busan. Characteristics of water masses at sampling sites is expected to be very complex due to the mixing of various water masses; Nakdong River runoff, Changjiang diluted water (CDW), South Sea coastal water, and Tsushima warm current. 18S rDNA clone libraries were constructed from surface waters at the three sites off Busan. Clone libraries revealed 94 unique phylotypes from 370 clones; Dinophyceae(42 phylotypes), Ciliophora(15 phylotypes), Bacillariophyta(7 phylotypes), Chlorophyta(2 phylotypes), Haptophyceae(1 phylotype), Metazoa(Arthropoda( 17 phylotypes), Chaetognatha(1 phylotypes), Cnidaria(2 phylotypes), Chordata(1 phylotype)), Rhizaria (Acantharea(2 phylotypes), Polycystinea(1 phylotype)), Telonemida(1 phylotype), Fungi(2 phylotypes). The difference in species diversity at the closely located three sites off Busan may be attributed to the various physicochemical properties of water masses at these sites by the mixture of water masses of various origins. Metagenomic study of species composition may provide useful information for understanding marine ecosystem of coastal waters with various physicochemical properties in the near feature.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.2
• /
• pp.65-69
• /
• 2013

In situ measurement of a primary production in East Sea, a marginal sea with a fair accessibility, is nonetheless an arduous task because of dynamic variability. In this study, we estimated the mean value of background (gross) primary production over the warm region of the East Sea based on a biogeochemical hypothesis. We propose an immiscible-shoaling hypothesis for the estimation of primary production, which assumes that primary production in the warm region occurred only by the nutrient supply through the Korea Strait. Annual primary production thus estimated is $209\;gC\;m^{-2}\;y^{-1}$, which is comparable to the satellite-based estimates of net primary production in the region. However, since this hypothesis assumes that primary production is based on only the new nutrients supplied to the system, primary production would increase by 40% if we release the assumption, and assume f = 0.6. This suggests that nutrient influx through the Korea Strait alone is more than enough to support primary production previously reported. Primary production may increase as much as two times if we considered other external perturbations excluded intentionally to estimate the background level of primary production, such as coastal upwelling, submerged ground water discharge, aeolian input, ocean dumping, and mixing by typhoons as well as the contribution of cyanobacteria that has not been quantified in the region. This implies the primary production in the warm region of the East Sea would be comparable to that of the Peru upwelling region with f = 0.6.