In this paper, we consider the fuzzy differential equations (equation omitted) where F(t, x(t)) is a continuous fuzzy mapping on [0, $\infty$) ${\times}$ E$\^$n/. The purpose of this paper is to prove that the solution ${\Phi}$(t) of the fuzzy differential equations is equiasymptotically stable in the large and uniformly asymptotically stable in the large.
본 연구에서는 간척지에서 플라스틱 온실의 기초안전성을 평가하기 위하여 강재 나선말뚝기초를 갖는 폭 6m 연동하우스 1개동과 강재 나선말뚝기초와 파이프줄기초를 각각 적용한 폭 8.2m 단동하우스 2개동을 SPT N값이 2인 간척지 시험포장에 설치하여 플라스틱 온실의 인발량 및 침하량을 측정하였다. 또한 플라스틱 온실에 적용된 나선말뚝기초 3종(${\phi}50$, ${\phi}75$ 및 ${\phi}100$)을 인근의 간척지 시험포장에 설치하여 인발저항특성을 시험하였다. 평가 기간 중 플라스틱 온실의 수직변위 움직임이 관측되었지만 온실의 규모와 비교하여 그 변위는 무시할만한 수준이었다. 평가 기간 중의 최대 수직변위는 나선말뚝 기초를 적용한 연동하우스의 경우 +9.0mm(인발)~-11.5mm(침하), 나선말뚝기초를 적용한 단동하우스의 경우 +1.3mm~-7.7mm, 파이프줄기초를 적용한 단동하우스의 경우 +0.9mm~-11.2mm로 나타났다. 나선말뚝기초의 허용인발력은 모두 극한하중 판정기준에 의해 판단할 수 있었으며 ${\phi}50mm$, ${\phi}75$와 ${\phi}100$ 나선말뚝기초의 최종 허용인발력은 각각 0.40kN, 1.0kN과 2.5kN으로 산정할 수 있었다. 평가기간 중 나선말뚝기초를 적용한 플라스틱 온실의 기초안전성을 최종적으로 판단하기에는 다소 무리가 있다고 판단되나 강재 나선말뚝기초를 간척지 플라스틱 온실의 기초로 사용하더라도 큰 문제는 없을 것으로 판단되었다.
This paper, which is one of the researches to limit high fault-current, treats the application of an inductive High Tc Superconducting Fault Current Limiter(HTSFCL) to distribution systems. In case that the inductive HTSFCL is applied to distribution systems, this paper presented the usefulness and the commercial possibility of it through computer simulation. If the inductive HTSFCL is established in distribution systems, after fault, it limits fault current effectively within a few millisecond, so it contributes to stability of power distribution system. Especially as the system with the HTSFCL is compared with the system without it, the system is improved in stability.
Standard thin disk theory predicts that an inner disk region dominated by radiation pressure is thermally unstable. However, this kind of instability isn't detected in the observations of X-ray binaries. In this work, we revisit this issue by investigating the stability of a thin disk with magnetically driven winds. It is found that the disk winds can help to make a thin disk stable by taking away most of the energy released in the disk, resulting in a much cooler disk. The disk can always be stable even for a very weak initial field strength ${\beta}_{p,0}{\leq}400$ when ${\alpha}=0.05$ and $B{\phi}=10B_p$ are adopted.
This paper deals with the design and development of an Injection-Locking Coupled Oscillators(ILCO), which functions like phase-shifter in the Active Intergrated Phased Array Antenna(AIPAA). This linear array 2-element ILCO consists of two Injection Locking Hair-pin Resonator Oscillators(ILHRO) and an unilateral amplifier. The first and second elements of the ILCO have same frequency tuning range but locking bandwidths of 11.5MHz and 14MHz respectively. A phase shift of .DELTA..PHI.=158.4.deg.(-78.0.deg. to 80.4.deg.) could be obtained inthe second element of ILCO when the first elementof the ILCO was in the reference locking mode(.DELTA..PHI.=0.deg.). When the ILCO is applied to the AIPAA, the predicted beam scanning angle value will be 38.4.deg.. Each ILCO gives good frequency stability and lower AM, FM, and PM noise charactheristics in the mutual coupling lockingmode. The ILCO can not only play a part as the phase shifter for the AIPAA but it can also be usedas the power combining device in the mm-wave frequency range and as a part of a T/R MMIC module.
연구 목적: 이 연구는 임플란트 직경, 길이 및 식립 부위가 임플란트의 안정성에 미치는 영향을 후향적 평가를 통해 비교, 분석하고자 하였다. 연구 대상 및 방법: 72명의 환자에게 식립된 총 90개의 임플란트(US II plus$^{TM}$, Osstem co, Busan, Korea)를 대상으로 임플란트 식립 직후와 인상 채득 당시에 공진주파수분석법(RFA)으로 임플란트 안정성 지수(ISQ)가 측정되었다. 상 하악에 식립된 직경은 4 mm와 5 mm이고 길이는 10 mm, 11.5 mm, 13 mm인 임플란트가 실험대상으로 선택되었다. 측정된 ISQ 값의 평균과 표준편차를 구하고 우선적으로 성별에 따른 차이를 확인하기 위하여 Independent t-test를 시행하였다. 임플란트 직경, 길이, 식립부위에 따른 ISQ 값의 실험군간 차이는 One-way ANOVA를 이용해 분석하였고, 사후검정을 위해 Tukey HSD test가 사용되었다. 임플란트 식립시와 인상채득시의 차이는 paired t-test로 분석하였다. 결과:인상채득시가 임플란트 식립 직후보다 임플란트 안정성의 증가가 관찰되었다. 임플란트 길이가 증가할수록 ISQ 값은 증가하였으나 통계적으로 유의적인 차이를 보이지 않았다. 직경 5 mm 임플란트는 4 mm 임플란트 보다 유의성 있게 높은 ISQ 값을 보였다(P<.05). 하악에 식립된 임플란트가 상악보다 더 높은 ISQ값을 보였다(P<.05). 결론:본연구결과, 임플란트 안정성을 높이기 위해서는 직경이 큰 임플란트를 사용하는 것이 효과적임을 알 수 있었다. 또한, 상악보다는 하악에서 더 높은 임플란트 안정성이 확인되었다. 임플란트 식립 직후의 일차 안정성보다 골유착 후 이차 안정성이 더 높게 나타남으로서 RFA를 이용한 방법이 골유착을 통한 임플란트 안정성의 변화를 평가함에 있어 임상적으로 유용한 것으로 판단된다. 임플란트 안정성 평가와 이에 영향을 주는 요소들에 대한 고려는 임플란트 하중 시기를 결정하고 임플란트 성공률을 증가시키는데 도움이 될 것이다.
Stability of inside power equipments are required for electron equipment in order to operate those safely. Also, the power circuits for these have been developing, but research of dielectric strength of power supply is insufficient. In this paper, for test insulation condition variation by void it is tested insulation characteristics variation, using $\phi-q-n$ distribution variation in partial discharge test.
Alnico magnets can be used as magnetic bearings for the precise electric power measuring instruments such as watt-hour meters because they have high remanence ($B_r$), relatively high maximum energy product ($(BH)_{max}$), and excellent temperature stability. In this study, Alnico composite magnets were fabricated by appropriately mixing alnico alloy powders with epoxy resin and binder. The Alnico powders mixed with epoxy resin and a hardening agent with a mixing ratio of 96:4 were pressed and then cured to be a toroid-type ring magnet with an outer diameter (${\Phi}_{out}$) of 15 mm, an inner diameter (${\Phi}_{in}$) of 6.5 mm and a thickness (t) of 2.5 mm, respectively. The magnetic properties of the Alnico ring magnets were varied with the mixing ratio of Alnico powders that possess different average particle sizes. The Alnico ring magnet prepared by mixing 5 wt% of $50{\mu}m$ (small size) powder, 15~20 wt% of $150{\mu}m$ (medium size) powder, and 75~80 wt% of $300{\mu}m$ (large size) powder showed the best magnetic properties (remanent induction, coercive force, maximum energy product, and surface flux density). In addition, measurements of temperature and moisture characteristics for the Alnico ring magnets showed that the surface flux densities of the N and S poles decreased little and the repulsive distance between the magnets decreased as small as 0.05 mm after 10 days.
We investigated the sintering and electric properties of ZnO-1.0 at% $TeO_2$ (ZT1) and 1.0 at% Mn-doped ZT1(ZT1M1) system. $TeO_2$ itself melts at $732^{\circ}C$ in air but forms the $ZnTeO_3$ or $Zn_2Te_3O_8$ phase with ZnO as increasing temperature and therefore retards the densification of ZnO to $1000^{\circ}C$. In ZT1M1 system, also, the densification of ZnO was retarded up to $1000^{\circ}C$ and then reached > 90% of theoretical density above $1100^{\circ}C$. It was found that a good varistor characteristics(nonlinear coefficient $a{\sim}60$) were developed in ZT1M1 system sintered at $1100^{\circ}C$ due to Mn which known as improving the nonlinearity of ZnO varistors. The results of C-V characteristics such as barrier height (${\Phi}_b$), donor density ($N_D$), depletion layer (W), and interface state density ($N_t$) in ZT1M1 ceramics were $1.8{\times}10^{17}cm^{-3}$, 1.6 V, 93 nm, and $1.7{\times}10^{12}cm^{-2}$, respectively. Also we measured the resistance and capacitance of grain boundaries with temperature using impedance and electric modulus spectroscopy. It will be discussed about the stability and homogeneity of grain boundaries using distribution parameter ($\alpha$) simulated with the Z(T)"-logf plots.
이성질체의 형태는 수용액 상태에서 종종 안정성과 반응성 등의 기본상태 뿐만 아니라 사슬성장 및 접힘 과정으로 인하여 형태형성에 영향을 주기 때문에 올리고펩티드의 형태를 이해하는 것이 중요하다. 본 논문에서는 L-알라닌(LA), 글리신(G) 5량체 모델의 무수 및 수화물(수화율; h/1) 상태의 구조와 에너지를 4가지 형태이성질체 (베타-확장형;= t-/t+, $PP_{II}$형; g-/t+, $PP_{II}$-유사형; g-/g+ 및 알파-나선형; g-/g-)에 대하여 B3LYP/6-31G(d,p)를 이용하여 양자화학계산(QCC) 방법으로 분석하였다. 구조최적화는 밀도함수 이론(DFT)으로써 B3LYP를 사용하였으며, 기본설정(Basic set)으로는 6-31G(d,p)를 이용하였다. 이미노 양성자(NH)를 갖는 LA와 G에서 베타-확장형, $PP_{II}$-유사형, 알파-나선형의 3가지 형태가 얻어졌으며, 대부분 물 분자가 $PP_{II}$-유사형과 알파-나선형에서는 CO-HN 분자 내 수소결합 사이에 주로 삽입되었고, 베타-확장형은 CO기에 부착되었다. 또한, LA와 G에서 $PP_{II}$-유사형 형태이성질체가 무수 및 수화물 상태에서 가장 안정적이었으며, $PP_{II}$ 형태이성질체는 얻어지지 않았다. LA에 대한 결과는 알라닌 올리고펩티드의 안정적인 형태가 주로 $PP_{II}$라고 보고한 다른 연구의 실험적 및 이론적인 결과와는 상이했다. 올리고펩티드 형태이성질체의 생성패턴과 안정성이 CO-HN의 분자 내 수소결합의 존재 여부 또는 출발 아미노산 내 $NH_2$기의 존재 여부에 강한 영향을 받는 것을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.