• Smart Structures and Systems
• /
• v.13 no.2
• /
• pp.257-280
• /
• 2014

In this paper, a novel PARAllel FACtor (PARAFAC) decomposition based Blind Source Separation (BSS) algorithm is proposed for modal identification of structures equipped with tuned mass dampers. Tuned mass dampers (TMDs) are extremely effective vibration absorbers in tall flexible structures, but prone to get de-tuned due to accidental changes in structural properties, alteration in operating conditions, and incorrect design forecasts. Presence of closely spaced modes in structures coupled with TMDs renders output-only modal identification difficult. Over the last decade, second-order BSS algorithms have shown significant promise in the area of ambient modal identification. These methods employ joint diagonalization of covariance matrices of measurements to estimate the mixing matrix (mode shape coefficients) and sources (modal responses). Recently, PARAFAC BSS model has evolved as a powerful multi-linear algebra tool for decomposing an $n^{th}$ order tensor into a number of rank-1 tensors. This method is utilized in the context of modal identification in the present study. Covariance matrices of measurements at several lags are used to form a $3^{rd}$ order tensor and then PARAFAC decomposition is employed to obtain the desired number of components, comprising of modal responses and the mixing matrix. The strong uniqueness properties of PARAFAC models enable direct source separation with fine spectral resolution even in cases where the number of sensor observations is less compared to the number of target modes, i.e., the underdetermined case. This capability is exploited to separate closely spaced modes of the TMDs using partial measurements, and subsequently to estimate modal parameters. The proposed method is validated using extensive numerical studies comprising of multi-degree-of-freedom simulation models equipped with TMDs, as well as with an experimental set-up.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.1
• /
• pp.24-29
• /
• 1986

A set of 21 crosses of F1 generation by diallel crosses from seven parent silkworm, Bombyx mori L. were used as materials to estimate genetic parameters such as gene action and combining ability. Experiments were conducted in 1985, and three characters, which are weight of cocoon, weight of cocoon layer and ration of cocoon layer, were observed. The data were analyzed for each character by Jinks', Hayman's and Griffing's methods. The result obtained are summarized as follows : 1. In Vr-Wr graphical analyses, weight of cocoon was found to be inherited in over dominance, and weight of cocoon layer and ration of cocoon layer were observed as partial dominance. 2. Estimate of additive component of variance(D) was greater than those of dominance component of variance(H) for weight of cocoon layer and ratio of cocoon layer, and positive values of F were observed for all characters. 3. Mean squares of general combining ability were higher than those of specific combining ability. 4. Variety Jam 107 was expressed as the highest GCA effects for three characters, and high SCA effects for all characters were observed in combinations of 113 $\times$Jung 14 and Jam 107 $\times$Jung 14.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.649-651
• /
• 2021

In recent years, O2O services for real estate sales are widely distributed in web platforms and apps. This allows sellers, buyers, and real estate brokers to quickly and conveniently conduct real estate sales and charter contracts. However, in the O2O-based real estate sales information system, it wastes time and money for real estate buyers due to the posting of fake information, partial correction of the sales information, and intentional non-posting of the sales information. Therefore, we propose a method of detecting the false or not of real estate property information that can occur on the web platform, and design and implement a proposal system for this. To this end, we propose a method of detecting personal identity and property information based on DID, a distributed identity authentication protocol. The false real estate sales information detection system proposed by us can determine the existence of real estate sales information, partially correct the false sales information, or prove whether or not intentionally unpublished in three steps.

• Journal of Korean Society of Transportation
• /
• v.18 no.2
• /
• pp.91-101
• /
• 2000

The optimal congestion charge in transportation economics corresponds to the solution to the welfare maximization Problem for users of a certain road link where congestion takes Place. This congestion charge is in nature the optimal Price of the transportation facility, which is derived by the Partial equilibrium analysis on that facility. Therefore it is not certain that this congestion charge can maximize the well-being of all the users of the total transportation network, since the analysis does not count the impact of the congestion charge on traffic volumes of other links. This study suggests an alternative approach to estimate the optimal congestion charge. The key difference of this study from Previous ones is to derive the solution through the general equilibrium analysis on a market where several transportation facilities as well as Private goods are available to consumers. This approach shows a set of solutions a little different from the Previous one, which are explained below. The optimal congestion charge is derived for two different cases. One is the situation of which the congestion charge is levied on every transportation facility In this case, the optimal solution of each facility should equate the marginal utility of every user to the marginal cost of the corresponding facility. This analysis result in general equilibrium coincides with the Previous analysis result in partial equilibrium. However this result cannot apply to another case of which the charge is imposed only on a certain transportation facility. In this case, the optimal charge on a certain transportation facility should be less than the optimal congestion charge of partial equilibrium analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.836-845
• /
• 2017

Gravimetric method is usually used to evaluate air-dry density, which is governing physical or mechanical properties of wood. Although it had high evaluation accuracy, the method is time consuming process. Thus, this study was conducted to estimate air-dry density of wood with high accuracy by using polychromatic X-ray and digital detector as alternative of gravimetric method. To quantify polychromatic X-ray projection for evaluating air-dry density, Lambert-Beer's law with the integral value of probability function was used. The integral value was used as weighting factor in the law, and it was determined by conducting simple test at various penetration depths and tube voltage. Mass attenuation coefficient (MAC) of wood also calculated by investigating polychromatic X-ray projection according to species, penetration depth and tube voltage. The species had not an effect on change of MAC. Finally, an air-dry density of wood was estimated by applying the integral value, MAC and Lambert-Beer's law to polychromatic X-ray projection. As an example, the relation of the integral value (${\alpha}$) according to penetration depth (t, cm) at tube voltage of 35 kV was ${\alpha}=-0.00091t{\times}0.0184$ while the regression of the MAC (${\mu}$, $cm^2/g$) was ${\mu}=0.5414{\exp}(-0.0734t)$. When calculation of root mean squared error (RMSE) was performed to check the estimation accuracy, RMSE at 35, 45 and 55 kV was 0.010, 0.013 and $0.009g/cm^3$, respectively. However, partial RMSE in relation to air-dry density was varied according to tube voltage. The partial RMSE below air-dry density of $0.41g/cm^3$ was $0.008g/cm^3$ when tube voltage of 35 kV was used. Meanwhile, the partial RMSE above air-dry density of $0.41g/cm^3$ decreased as tube voltage increased. It was conclude that the accuracy of estimation with polychromatic X-ray and digital detector was quite high if the integral value and MAC of wood were determined precisely or a condition of examination was chosen properly. It was seemed that the estimation of air-dry density by using polychromatic X-ray system can supplant the gravimetric method.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.1
• /
• pp.46-62
• /
• 1989

This paper presents the results of full-scale structural measurements of 4,800 unit pure car carriers "HYUNDAI NO.103" and "HYUNDAI NO.105" on one voyage respectively for each ship, especially in order to investigate the local strength of partial bulkhead above free-board deck. With the measured data, the short-term frequency analyses have been performed. The results show that the wave-induced stresses follow, on the whole, well the Rayleigh distribution. In addition, it has been found from the measured data that transverse local stresses at bulkhead section have a very close relation with the acceleration in athwartship direction. Finally, the long-term analysis has been attempted by using the following two statistical distributions mainly in order to estimate the maximum stress amplitude at the corners of partial bulkhead. 1) Exponential distribution of cycles of stress amplitude 2) Double exponential distribution of extreme values of stress amplitude for each short-term analysis The results of these two cases show a good agreement with each other. For example, the estimated maximum stress amplitude for 10 years at port-side corner of Fr. 132 partial bulkhead is $2125kg/cm^2$ for the first case and $2170kg/cm^2$ for the second case just based on the measured data.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.689-699
• /
• 2013

This paper studies the partial credibility application method by assuming the empirical prior or noninformative prior informations in auto insurnace business where intensive rating segmentation is expanded because of premium competition. Expanding of rating factor segmetation brings the increase of pricing cells, as a result, the number of cells for partial credibility application will increase correspondingly. This study is trying to suggest more accurate estimation method by considering the Bayesian framework. By using empirically well-known or noninformative information, inducing the proper posterior distribution and applying the Bayes estimate which is minimizing the error loss into the credibility method, we will show the advantage of Bayesian inference by comparison with current approaches. The comparison is implemented with square root rule which is a widely accepted method in insurance business. The convergence level towarding to the true risk will be compared among various approaches. This study introduces the alternative way of redcuing the error to the auto insurance business fields in need of various methods because of more segmentations.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.1
• /
• pp.142-150
• /
• 2010

The purpose of this study is to analyze maintenance costs and estimation of elemental costs for educational buildings. The adapted research method selected four school buildings in seoul region as BTL projects. On the basis of the selected case, the study suggested a model to establish a system for each parts and estimate analyzed construction costs and maintenance costs according to that system. According to the analysis, the study proposed a partial construction costs analysis table and maintenance costs table and analyzed proper construction costs and maintenances costs. The results of this study are as follows 1) The average ratio followed by calculation of partial construction costs of the four school buildings are as followings. The total construction costs is analysed 6,666million won and each part of average rations is structure 47.15%, exterior of building 8.34%, interior of building 23.37%, electricity & fire fighting facility 5.74%, water supply & healthy facility 4.27%, heating & water supply facility 5.25%, landscape 1.36%, civil engineering works 4.51%. 2)The average ratio followed by analysis of partial maintenance costs of the four school buildings are as followings. The total maintenance costs is analysed 4,309 million won and each part of average ratio is exterior of building 11.02%, interior of building 41.81%, electricity & fire fighting facility 14.81%, water supply & healthy facility 11.22%, heating & water supply facility 12.76%, landscape 5.75%, civil engineering works 2.63%.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.98-113
• /
• 2002

In this paper, we present advanced algorithms to reduce the computations of block matching algorithms for motion estimation in video coding. Advanced multi-level successive elimination algorithms(AMSEA) are based on the Multi-level successive elimination algorithm(MSEA)[1]. The first algorithm is that when we calculate the sum of absolute difference (SAD) between the sum norms of sub-blocks in MSEA, we use the partial distortion elimination technique. By using the first algorithm, we can reduce the computations of MSEA further. In the second algorithm, we calculate SAD adaptively from large value to small value according to the absolute difference values between pixels of blocks. By using the second algorithm, the partial distortion elimination in SAD calculation can occur early. So, the computations of MSEA can be reduced. In the third algorithm, we can estimate the elimination level of MSEA. Accordingly, the computations of the MSEA related to the level lower than the estimated level can be reduced. The fourth algorithm is a very fast block matching algorithm with nearly 100% motion estimation accuracy. Experimental results show that AMSEA are very efficient algorithms for the estimation of motion vectors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1207-1215
• /
• 2013

This paper proposes the location estimation techniques of distributed targets with the multi-sensor data perceived through IR sensors of the military robots in consideration of obstacles. In order to match up targets with measured azimuths, to add to the depth-first search (DFS) algorithms in free-obstacle environment, we suggest the expanded DFS (EDS) algorithm including bypass path search, partial path search, middle level ending, and the supplementation of decision metric. After matching up targets with azimuths, we estimate the coordinate of each target by obtaining the intersection point of the azimuths with the least square error (LSE) algorithm. The experimental results show the error rate of estimated location, mean number of calculating nodes, and mean distance between real coordinates and estimated coordinates of the proposed algorithms.