• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.317-324
• /
• 2018

The purpose of this study was to investigate factors affecting body image in adolescents. The subject of study is 140 adolescents in the three middle schools from the J city. The data were collected using a self-report questionnaire from March 15 to March 29, 2017. Data were analyzed by descriptive statistics, T-test, ANOVA, Pearson's correlation, and multiple regression with SPSS 20.0 program. Body image was found to be in a significant positive correlation with family strength and self-esteem. The result of the multiple regression indicates the self-esteem(${\beta}=.24$, p<.05), family strength(${\beta}=.19$, p<.05) and gender(${\beta}=.16$, p<.05) predict 17.9% (F=11.10, p<.001) of body image. Therefore, it is necessary to develop self-esteem and family strength strategy intervention program for establishing a right body image of adolescents.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.248.2-248
• /
• 2001

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1106-1112
• /
• 2003

For the purpose of making clear the role of oxygen in the thermoelectric properties of FeSi$_2$, thermoelectric measurements and spectroscopic characterization were conducted for the oxidized specimens fabricated from ($\alpha$+$\varepsilon$)-phases and/or $\beta$-phase. Addition of oxygen to FeSi$_2$ prevented both densification during sintering and transformation from metallic phases to semiconducting phase during annealing treatment. In an specimens, electrical conductivity and thermal conductivity decreased with oxidation time. The Seebeck coefficient was positive and small for pure FeSi$_2$. And/or the oxidized specimens fabricated from ($\alpha$+$\varepsilon$)-phases. However, it was negative and showed a maximum peak at about 500 K for the oxidized FeSi$_2$ fabricated from $\beta$-phase. The value of maximum peak increased with oxidation time.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.239-257
• /
• 1996

$\beta$-BaB2O4는 고출력 가시광선 및 적외선을 발진시키는데 유용한, 비선형 특성을 가진 물질이다. $\alpha$-$\beta$ 상전이 온도가 녹는점보다 18$0^{\circ}C$ 낮기 때문에 보통 flux법으로 단결정을 성장시킨다. 수년전 Itoh등은 $\beta$-BaB2O4단결정을 congruent조성의 용액으로부터 Czochralski법으로 metastable한 상태에서 직접 성장시켰다. 그렇지만 그 공정은 잘 이해되지 않고 있으며 재현하기가 매우 어렵다. 저자들은 $\beta$-BaB2O4단결정을 용액표면온도도 1034$^{\circ}$-1085$^{\circ}C$, pulling rate 3mm/h, 10-30 rpm의 범위에서 성장시켰으며 융액표면의 온도구배는 $\beta$-상으로 성장시키는데 매우 중요한 인자로 여겨진다. Seed로는 직경 1-2mm의 c축방향 $\beta$-BaB2O4단결정 봉이 상용되어 성장방향을 조절하고 열응력을 최소화시켰다. 성장된 $\beta$-상의 단결정들은 6-fold모양을 하며 표면에 작은 비늘같은 것들이 붙어있고 중심부에 core가 있는 것을 알았다. Flux법으로 성장시킨 $\beta$-BaB2O4단결정을 사용한 seeds는 단결정 성장 및 냉각 중에 cracks이 자주 발생하였으며, boule의 cracks은 afterheater를 사용할 경우 다소 줄일 수 있었다. 성장된 단결정의 광학특성이 측정되었다.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.540-546
• /
• 1999

Solution conformation of cyclo-($Gln^1-Trp^2-Phe^3-{\beta}Ala^4-Leu^5-Met^6$), new NK-2 antagonist in dimethyl sulfoxide solution, has been determined by the use of two-dimensional nuclear magnetic resonance spectroscopy combined with simulated annealing calculations. The peptide exhibited converged structures with the atomic root-mean-square difference for the backbone atoms ($N,\;C^{\alpha},\;C'$) of all residues being 0.02${\AA}$ in the 25 annealed structures. The analysis of the structures indicated that the cyclic peptide has three intramolecular hydrogen bonds between $Met^6NH$ and ${\beta}Ala^4CO$, ${\beta}Ala^4NH$ and $Met^6CO$, $Phe^3NH$ and $Met^6CO$, and contain a type-I ${\beta}$-turn with Gln and Trp and ${\gamma}$-turn with Leu. The addition of an extra methylene group to Gly, i.e. P-Ala residue, may relax some unfavorable restraints in the cyclic backbone structure, hence enabling an additional hydrogen bond, which results in stabilizing one conformation.

• Composites Research
• /
• v.28 no.3
• /
• pp.75-80
• /
• 2015

Poly(vinylidene fluoride-trifluoroethylene; P(VDF-TrFE)) is one of the most promising electroactive polymers with numerous application potentials in many fields of industry. Because of its good electro-mechanical properties P(VDF-TrFE) has been used for a number of sensors and actuators and also can be used for monitoring composite structure behaviors as a sensor. Three different ways (Electrical poling, annealing-cooling, and pressing) to enhance ${\beta}$-phase of P(VDF-TrFE) film were carried out. A microscopic analysis was conducted using X-ray diffraction to investigate the effect of such treatments on piezoelectric properties of P(VDF-TrFE) film. From the results, poling, annealing-cooling, and pressing were all effective to enhance ${\beta}$ crystallinity of P(VDF-TrFE) film and the maximum increase rate was 62.80% from 45.29% of the control group.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.139-139
• /
• 2017

최근 환경오염 문제로 인한 연비 규제 강화 속도가 빨라지고 있으며 이에 따른 연비 향상 기술이 크게 대두 되고 있다. 연비 향상 기술 중 경량화 방안소재로 알루미늄(Al), 마그네슘(Mg) 등의 비철금속을 주로 사용하고 있으며, 이중 알루미늄은 다른 경량화 금속소재보다 우수한 경쟁력을 가지고 있다. 하지만 경제적인 측면에서 철 대비 비용적인 어려움을 가지고 있고 용접성이 떨어지기 때문에, 자동차 부품의 일부만 알루미늄 소재를 선택하여 사용하고 있는 실정이며 알루미늄의 높은 이온화 경향으로 인해 기존 자동차 철강 소재와 접촉 시 쉽게 부식되는 단점을 가지고 있다. 이러한 문제점을 해결하기 위해서는 알루미늄의 금속원소를 첨가하는 연구가 지속적으로 개발 되고 있다. 알루미늄 합금에서 마그네슘의 첨가는 좋은 용접성과 내식성, 강도를 향상시킨다. 하지만 3%이상의 마그네슘 첨가는 입계에 ${\beta}(Al_xMg_y)$석출상이 석출되게 되며, 입계에 연속적으로 형성된 ${\beta}(Al_xMg_y)$석출상은 응력 부식 균열 (Stress corrsion cracking)과 입계 부식(Intergranular corrosion)을 야기하는 결과를 가져온다고 알려져 있다. 이 문제를 해결하기 위해 Al 5000계열 합금의 Zn의 첨가를 통해 ${\tau}(Al_xMg_yZn_z)$을 입계에 석출시켜서 입계에 ${\beta}(Al_xMg_y)$상의 석출을 방지함으로써 내식성을 향상시키거나 Al 5000계열 합금의 열처리를 통해 ${\beta}(Al_xMg_y)$석출상을 고용시킴으로써 응력부식균열의 발생을 억제하는 연구도 있다. 하지만 열처리 후 Polarization test를 이용한 내식성 연구는 잘 안 알려져 있다. 따라서 이번 연구에서는 Al5000계열의 주조한 합금을 DSC분석을 통하여 ${\beta}(Al_xMg_y)$석출상의 고용 온도가 약 $470^{\circ}C$라는 것을 확인한 후, 실온에서 $100^{\circ}C/hr$으로 가열하고 조건에 따라 $450^{\circ}C$에서 3시간, 6시간, 12시간, 24시간, 30시간 항온 유지시킨 후 공냉을 진행하였다. 열처리를 마친 시편은 에폭시를 이용하여 마운팅 하였으며, 시편표면을 2000#까지 연마 후 증류수로 세척한 다음 질소를 이용하여 건조 후 분극 시험을 진행하였다. 3.5wt% NaCl 용액에서 분극 곡선을 통해 부식거동을 확인한 결과 24시간까지 시간이 증가 할수록 내식성이 우수해지는 것을 확인하였으며, 추가적으로 조직사진, SEM & EDS 분석과 XRD, TEM 분석을 통해 내식성은 입계에 존재하는 Mg의 조성이 감소하게 되면 내식성이 향상되는 것을 관찰하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.268-271
• /
• 1998

Poly(butylene terephthalate) (이하 PBT)는 두 종류의 결정형태를 가지는 고분자로 널리 알려져 있다. 이 두 가지 결정형태를 각각 $\alpha$상 결정과 $\beta$상 결정이라고 하는데, 이 두 결정형은 방사나 연신 또는 열처리 등의 공정에 의하여 생성되기도 하고 $\alpha$-$\beta$상 간 전이를 일으키기도 한다[1],[2]. (중략)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.203-207
• /
• 2019

Calcium phosphates such as hydroxyapatite (HAp), tricalcium phosphate (${\beta}$-TCP), and biphasic calcium phosphate (BCP, HAp/${\beta}$-TCP) have been prepared via hydrothermal treatment. The synthesis was conducted by reacting ($Ca(OH)_2$) aqueous solution with phosphoric acid ($H_3PO_4$) under different hydrothermal synthesis conditions (temperatures up to $150^{\circ}C$ and pH lower than 12). The effects of initial precursor Ca/P ratio (1.30, 1.50 and 1.67) and post heat treatment on the phase evolution behavior of the powders and sintered ceramics were investigated. The phases of resulting powders and sintered ceramics were controllable by adjusting the initial Ca/P ratio. A single HAp phase without any noticeable second phase was obtained for the initial Ca/P ratio of 1.67 in the overall heat treatment range. Pure ${\beta}$-TCP and biphasic calcium phosphate (HAp/${\beta}$-TCP) were synthesized from precursor solutions having Ca/P molar ratios of 1.30 and 1.50, respectively, after having been heat treated at $900^{\circ}C$ or higher. Dense ceramics with translucency were obtained at considerably lower sintering temperatures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.23-28
• /
• 1992

Starch solid model system was employed to investigate the effect of lipoxygenase, ${\beta}-carotene$, ${\alpha}-tocopherol$ and water activity on the oxidation of linoleic acid. The rate of oxidation of linoleic acid by lipoxygenase was increased with the increase in water activity, Addition of ${\beta}-carotene$ and ${\alpha}-tocopherol$ to this system has been shown to inhibit the oxidation of linoleic acid and ${\alpha}-tocopherol$ was more effective antioxidant than ${\beta}-carotene$. However, an increase in the concentration of ${\beta}-carotene$ was found to have a strong antioxidant effect in the solid model system. And also the antioxidative action of ${\beta}-carotene$ was increased with increasing water activity in this system.