• 한국자기공명학회논문지
• /
• 제14권1호
• /
• pp.18-27
• /
• 2010

The NMR spectrum and spin-lattice relaxation times, $T_1$, of the $^{1}H$ nuclei in $(NH_{4})_{2}Cd_{2}(SO_{4})_{3}$ single crystals were obtained. The two minima in $T_1$ in the paraelectric phase are attributed to the reorientational motions of the $NH_{4}^{+}$ groups. The $^{1}H\;T_1$ of the $(NH_{4})_{2}Cd_{2}(SO_{4})_{3}$ crystals can be described with Bloembergen- Purcell-Pound (BPP) theory. The experimental value of $T_1$ can be expressed in terms of an isotropic correlation time ${\tau}_H$ for molecular motions by using the BPP theory, and determine the role of protons in these processes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.253-254
• /
• 2006

We have manufactured CdS and Cd(Cu)S thin films by chemical bath deposition(CBD) process, and examined the effects of $NH_4Cl$ and TEA. The addition of $NH_4Cl$ remarkably enhanced the film thickness of CdS, however, TEA slightly decreased the film thickness. The thickness of CdS film prepared from the aqueous solution of 0.003 M $CdSO_4$ 0.00008 M $CuSO_4$, 1.3M NH3, 0.03 M $SC(NH_2)_2$ and 0.0009 M $NH_4Cl$ was 210 nm and resistivity of that was $1.2{\times}10^3{\Omega}cm$.

• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.30-35
• /
• 2008

In this paper, CdS/Cd(Cu)S thin films and diodes were manufactured via a chemical bath deposition (CBD) process, and the effects of $NH_4Cl$ and TEA(triethylamine) on the properties of the films were examined. The addition of $NH_4Cl$ significantly increased the thickness of the CdS and Cd(Cu)S films, however, the addition of TEA decreased the thickness in both cases slightly. The addition of $NH_4Cl$ along with TEA increased the film thickness more effectively compared to the addition of only $NH_4Cl$. The thickness of the CdS film prepared from an aqueous solution of 0.007 M $CdSO_4$, 1.3 M $NH_4OH$, 0.03 M $SC(NH_2)_2$, 0.0001 M TEA and 0.03 M $NH_4Cl$ was 310 nm. Dark resistivity of the CdS film was $1.2{\times}10^3\;{\Omega}cm$ and the photo resistivity with $500\;W/cm^2$ irradiation of white light was $20{\Omega}cm$. The Cd(Cu)S/CdS thin film diodes prepared by CBD showed good rectifying characteristics.

• 한국전기전자재료학회논문지
• /
• 제30권10호
• /
• pp.625-630
• /
• 2017

ZnS was chemically deposited as a buffer layer alternative to CdS, for use as a Cd-free buffer layer in $Cu(In_{1-x}Ga_x)Se_2$ (CIGS) solar cells. The deposition of a thin film of ZnS was carried out by chemical bath deposition, following which the structural and optical properties of the ZnS layer were studied. For the experiments, zinc sulfate hepta-hydrate ($ZnSO_4{\cdot}7H_2O$), thiourea ($SC(NH_2)_2$), and ammonia ($NH_4OH$) were used as the reacting agents. The mole concentrations of $ZnSO_4$ and $SC(NH_2)_2$ were fixed at 0.03 M and 0.8 M, respectively, while that of ammonia, which acts as a complexing agent, was varied from 0.3 M to 3.5 M. By varying the mole concentration of ammonia, optimal values for parameters like optical transmission, deposition rate, and surface morphology were determined. For the fixed mole concentrations of $0.03M\;ZnSO_4{\cdot}7H_2O$ and $0.8M\;SC(NH_2)_2$, it was established that 3.0 M of ammonia could provide optimal values of the deposition rate (5.5 nm/min), average optical transmittance (81%), and energy band gap (3.81 eV), rendering the chemically deposited ZnS suitable for use as a Cd-free buffer layer in CIGS solar cells.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.181-187
• /
• 2022

CdSe-Mn nanocomposites were synthesized using a microwave method with sodium sulfite (Na₂SO₃), selenium (Se), cadmium sulfate octahydrate (3CdSO₄·8H₂O), ammonia solution (NH₃·H₂O), and manganese (II) sulfate monohydrate (MnSO₄·H₂O). We obtained CdSe-Mn-C₆₀ nanocomposites by calcining CdSe-Mn nanocomposites and fullerene (C₆₀) in an electric furnace at 700 ℃ for 2 h. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to characterize the crystal structures, lattice vibrations, and surface morphologies of the products, respectively. The photocatalytic activities of the CdSe-Mn-C₆₀ nanocomposites were investigated based on the photocatalytic degradations of organic dyes such as BG, MB, MO, and RhB under ultraviolet (UV) irradiation at 254 nm. UV-visible spectrophotometry was used to confirm the degradation process.

• 분석과학
• /
• 제15권4호
• /
• pp.321-328
• /
• 2002

From May 1999 to July 2000, concentration of 17 metals (Al, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sr, V, Zn), 4 ions (${NH_4}^+$, $Cl^-$, ${NO_3}^-$, ${SO_4}^{2-}$) and pH in rainwater were investigated. The volume-weighted mean concentrations (VWM) of ${NO_3}^-$ and ${SO_4}^{2-}$ were 16.0 and $17.0{\mu}mol\;L^{-1}$. The average pH was 4.53, which ranged from 3.83 to 6.06. The characteristic variations of these species were investigated in terms of the source of these species by principal component analysis (PCA) and interelement correlation coefficients. The elements were classified into three categories: anthropogenic source (Cd, Cu, Fe, Ni, Pb, V, Zn, ${NH_4}^+$, ${NO_3}^-$, ${SO_4}^{2-}$ and $H^+$), soil and crust dust (Al, Ba, Ca, Fe, Mn) and sea salts (Mg, Na, $Cl^-$). In addition, we compared the concentrations in rainwater, which were taken on the same day in three sites (Higashi-Hiroshima, an urban-facing area and a mountain-facing area of Mt. Gokurakuji) in order to examine the regional effect against the concentrations in them. At the urban-facing area of Mt. Gokurakuji, the concentrations of chemical compositions were higher than other areas.

• 한국대기환경학회지
• /
• 제4권2호
• /
• pp.57-66
• /
• 1988

Sandy dust phenomena was observed from April 19 to 23, 1988 in Seoul and suspended particulate was collected by Andersen air sampler during this period. The samples were analyzed for 16 components $(SO_n^{2-}, NO_3^-, Cl^-, PO_4^{3-}, NH_4^+, F^-, Al, Fe, K, Cu, Mn, Na, Pb, Mg, Ca, Cd)$. The conclusions are as follwes: 1. Total suspended particulate concentation during the period of sandy dust phenomena was 489 $\mug/m^3$ (ordinary times: 140-125 $mug/m^3$) 2. The water - soluble ion component concentration of suspended particulate during the period of sandy dust phenomena was few and the metal concentration of that was more than that of ordinary times. 3. The cumulative frequency distribution of suspended particulates in logarithmic diagram did not show similar to normal log distribution during the period of sandy dust phenomena. 4. $SO_4^{2-}, NO_3^-, Cl^-, and PO_4^{3-}$ was onsided to coarse particle, and $NH_4^+$ and F to fine particle in the size distribution of water - soluble ion components during the period of sandy dust phenomena. 5. Metal concentration was high and Al, Fe, Cu, Mn, Na, Mg, and Ca was onsided to coarse particle, and K, Pb, and Cd to fine particle in the size distribution of metal components. 6. During the period of sandy dust phenomena the quantity of respirable particle (< 1 $\mum$) was about 3 times and that of metal components were about 2 - 11 times than that of ordinary times. 7. The concentrations of $NO_3^-, Cl^-, NH_4^+$ at ordinary times were 1.1 - 4 time than that of the period of sandy dust phenomena.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.170-173
• /
• 2010

Nanocrystalline cadmium sulfide (CdS) thin films were prepared using chemical bath deposition in a solution bath containing $CdSO_4$, $SC(NH_2)_2$, and $NH_4OH$. The CdS thin films were investigated using X-ray diffraction (XRD), photoluminescence (PL), and Fourier transform infrared spectroscopy (FTIR). The as-deposited CdS thin film prepared at $80^{\circ}C$ for 60 min had a cubic phase with homogeneous and small grains. In the PL spectrum of the 2,900 A-thick CdS thin film, the broad red band around 1.7 eV and the broad high-energy band around 2.7 eV are attributed to the S vacancy and the band-to-band transition, respectively. As the deposition time increases to over 90 min, the PL intensity from the band-to-band transition significantly increases. The temperature dependence of the PL intensity for the CdS thin films was studied from 16 to 300 K. The $E_A$ and $E_B$ activation energies are obtained by fitting the temperature dependence of the PL intensity. The $E_A$ and $E_B$ are caused by the deep trap and shallow surface traps, respectively. From the FTIR analysis of the CdS thin films, a broad absorption band of the OH stretching vibration in the range $3,000-3,600\;cm^{-1}$ and the peak of the CN stretching vibration at $2,000\;cm^{-1}$ were found.

• 한국전기전자재료학회논문지
• /
• 제27권5호
• /
• pp.269-275
• /
• 2014

In this study, chemical bath deposition method was used to grow Zinc sulfide(ZnS) thin films from $NH_3/SC(NH_2)_2/ZnSO_4$ solutions at $90^{\circ}C$. ZnS thin films have been prepared onto ITO glass. The concentrations of $ZnSO_4$ and $NH_3$ were varied while the concentration of Thiourea was fixed in 0.52 M. Structural, optical, electrical characteristic of ZnS thin films were measured. The physical and optical properties of different ZnS thin films were influenced severely by the concentration of the two reacting chemicals. The optimal concentration of $ZnSO_4$ and $NH_3$ was 0.085 M and 1.6 M, respectively.

• 한국환경과학회지
• /
• 제12권6호
• /
• pp.665-676
• /
• 2003

본 연구는 서울지역의 PM$_{2.5}$의 화학적 조성을 조사하기 위하여 2000년 10월 1일부터 200l년 9월 26일까지 계절별(봄, 여름, 가을 겨울)로 PM$_{2.5}$ dichotomous air sampler를 이용하여 포집한 후, ICP-MS를 이용하여 검출한계 이상인 13가지의 중금속 성분(Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mn, Pb, Si, V, Zn)과 IC를 이용하여 5가지의 수용성 이온성분($Na^{+}$, NH$_4$$^{+}$, Cl￣, NO$_3$$^{-}$ , SO$_4$$^2$￣)을 측정/분석하였다. 분석결과에 얻어진 PM$_{2.5}$의 농도와 화학적 성분의 농도를 계절별로 비교하였으며, 중금속 성분의 정성적인 발생원의 기여도를 파악하기 위하여 주성분 분석을 실시하였다.1) 조사기간 중 PM$_{2.5}$의 계절별 농도는 겨울(33.91 $\mu\textrm{g}$/㎥) > 봄(28.79 $\mu\textrm{g}$/㎥) > 가을(18.62 $\mu\textrm{g}$/㎥) >여름(14.92 $\mu\textrm{g}$/㎥) 순으로 조사되어 주로 겨울철에 대기중 PM$_{2.5}$의 농도가 높은 것을 확인할 수 있었다. PM$_{10}$에 대한 PM$_{2.5}$의 기여도는 33.7~83.5 %로 나타났으며, PM$_{2.5}$PM$_{10}$의 평균비는 0.54로 조사되었고, 회귀분석에서 PM$_{10}$=4.20PM$_{2.5}$+.9.91, $R^2$=0.73 (p < 0.05)의 회귀관계식을 나타나 PM$_{2.5}$로 PM$_{10}$을 73% 수준에서 설명할 수 있었으며 통계적으로 유의한 값을 보였다. 2) PM$_{2.5}$의 중금속 성분은 Si > Fe > Al> Zn >Ca>Ba>V>Pb>As>Cu>Cr>Cd 순으로 높은 농도를 보였다. 중금속 성분의PM$_{2.5}$PM$_{10}$의 비는 인위적인 발생원에서 기인하는 Cd, Cr, Pb, V, Zn과 같은 중금속 성분의 비율이 높은 조사되었고, 자연적인 발생원에서 기인하는 Al, Ca, Fe, Mn, Si와 같은 중금속 성분의 비율이 낮게 조사되었다 특히 Al, Ca, Fe의 비율이 봄철에 높아 중국에서 발생한 황사의 영향을 받은 것으로 사료된다. 3) PM$_{2.5}$ 중 이온 성분의 농도는 NO$_3$￣ > SO$_4$$^2$￣ > Cl￣ > NH$_4$$^{+}$ 순으로 조사되었으며, PM$_{2.5}$PM$_{10}$의 비를 조사한 결과, NO$_3$￣,SO$_4$$^2$￣, Cl￣의 비율이 높아 PM$_{10}$에 포함되어 있는 PM$_{2.5}$가 산성오염물질에 많은 영향을 받는 것으로 조사되었다 4) PM$_{2.5}$의 정성적인 발생원을 추정하기 위해 중금속 성분에 대한 주성분 분석의 결과 3개의 주성분으로 나누어 졌으며, 주요 발생원은 자연발생원인 토양성분과 석유연료 연소에서 배출되는 성분으로 추정되어 이 발생원이 중금속 성분 농도에 영향을 미치는 것으로 사료되며, PM$_{2.5}$의 화학적 성분은 지역여건과 기상조건, 계절변동에 많은 영향을 받는 것으로 사료된다. 이상의 연구결과에서 PM$_{10}$에 비해 인체에 유해한 화학적 성분(중금속, 이온 성분)이 포함되어 있는 PM$_{2.5}$에 대한 철저한 관리 및 규제 설정이 요구되며, 측정지점의 특성상 자동차 배기가스와 금속제련 및 가공에 의한 영향을 주로 받는 것으로 추정되었다 또한 지역여건과 기상조건에 영향을 많이 받는 PM$_{2.5}$에 대한 지속적인 연구와 자료축적이 요구되고 발생원에 대한 정량적인 기여도를 평가하기 위한 연구가 필요하다고 생각된다. 연구가 필요하다고 생각된다.기 위한 연구가 필요하다고 생각된다. 연구가 필요하다고 생각된다.