• Journal of Magnetics
• /
• v.4 no.2
• /
• pp.60-64
• /
• 1999

The addition of Co into $Nd_4Fe_{77.5-x}Co_x(HfGa)_yB_{18.5}(0$\leq$x$\leq$5, y=0, 0.5)4 was found to enhance the magnetic properties of $Fe_3B/Nd_2Fe_{14}B$ nanocomposite magnets. The enhancement resulted from the fact that Co retarded the crystallization of $\alpha$-Fe or Fe3B but accelerated that $Nd_2Fe_{14}B$. The decreased interval between the onset of crystallization temperature of Fe3B and $Nd_2Fe_{14}B$. phases enabled the grain growth of each phase to be uniform dufing a post annealing of the melt spun ribbons. The addition of 3~5 at. % Co into ternary composition $Md_4Fe_{77.5}B_{18.5}$ increased the coercivity (iHc) from 3.27 to 3.54 kOe with the enhanced remanence value (4$\pi$Mr) around 11.54 kG. From the ribbon magnets of Nd4Fe71.5Co5Hf0.5B18.5 made at 26 m/sec and annealed at 68$0^{\circ}C$ for 10 min, the magnetic properties of Br=11.54 kG, iHc=3.54 kOe, and (BH)max=14.35 MGOe were obtained from volume production line.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.126-130
• /
• 2016

Ti alloys have been used for orthopedic devices, automobile and aircraft because it has several beneficial properties such as a low density, a low modulus of elasticity, excellent high-temperature strength, excellent corrosion resistance and biocompatibility. In this study, Ti-64 composition (6 wt% Al, 4 wt% V) is investigated as a representative Ti-alloy system on the crystallographic characteristics and microstructure. We investigated crystal structure of the Ti-64 sample by XRD, and analyzed microstructure by compositional differences measured using FE-SEM and EDX.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.7
• /
• pp.1065-1070
• /
• 2005

$[Mn_{12}O_{12}(O_2CPh-4-SMe)_{16}(H_2O)_4]{\cdot}7CH_2Cl_2$ (1), a new single-molecule magnet complex has been successfully synthesized by substitution of acetate ligand of Mn12ac with 4-(methylthio)benzoic acid. Complex 1 crystallizes into triclinic P$\overline{1}$ with a = 18.321(3) $\AA$, b = 19.011(3) $\AA$, c = 27.230(4) $\AA$, $\alpha$ = 86.973(3)$^{\circ}$, $\beta$ = 76.919(3)$^{\circ}$, $\gamma$ = 87.613(3)$^{\circ}$, and Z = 2. In complex 1, one Mn(III) ion has an abnormal Jahn-Teller elongation axis oriented at an oxide ion. Complex 1 has two out-of-phase ac susceptibility peaks in the 2-4 K and 4-7 K regions. Effective anisotropy energy barrier and pre-exponential factor are $U_{eff}$ = 45.95 K, 1/$\tau$0 = 8.6 ${\times}\;10^9s^{-1}\;for\;{\chi}_M$'' peaks in the lower temperature region and $U_{eff}$ = 59.45 K, 1/$\tau_0$ = 2.2 ${\times}\;10^8\;s^{-1}$ for $\chi_M$'' peaks in the higher temperature region. The parameters of S = 10, g = 1.87, D = -0.40 $cm^{-1}$, and E = 0.00034 $cm^{-1}$ were obtained from the M/N${\mu}_B$ vs. H/T plot of complex 1.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.375-381
• /
• 2007

Statement of problem. Prior to determining an optimal width of micropatterned grooves provided on titanium substrata, we have done a pilot study using surface topographies in combined microm and submicrom levels. Purpose. The purpose of this study was twofold 1) to assess the proliferation and 2) to analyze the expression of genes encoding the intracellular signaling proteins involved in cell-substratum adhesions and adhesion-dependent G1 phase cell cycle progression of human gingival fibroblasts plated on smooth and microgrooved/acid-etched titanium substrata. Material and methods. Three groups of titanium discs as NE0 (smooth Ti substrata), E15 (Ti substrata with microgrooves of $15{\mu}m$ of spacing and $3.5{\mu}m$ in depth and with further acidetching), and E30 (Ti substrata with microgrooves of $30{\mu}m$ spacing and $3.5{\mu}m$ in depth and with further acid-etching) served as the human gingival fibroblasts' substrata. Viability and proliferation of fibroblasts were determined using an XTT assay. Gene expressions of fibronectin, ${\alpha}5$ integrin, CDK4, and $p27^{kip}$ were analyzed in RT-PCR. Cell-substratum interactions were analyzed in SEM. Results. From the XTT assay at 24 h incubation, the mean optical density (OD) value of E15 was significantly greater than the values of E30 and NE0. At 48 and 96 h however, the mean OD values of E30 were significantly greater than the values of E15 and NE0. No differences in the expression of PCR transcripts at 96 h incubations were noted between groups, whereas at 48 h, an unexpected increase in the expression of all the transcripts were noted in E15 compared with other two groups. Fibroblasts were observed to orient and adhere inside the microgrooves. Conclusion. Micropatterned grooves and acid-etching on Ti substrata alter viability and gene expression of adhered human gingival fibroblasts.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1059-1063
• /
• 2005

In the absence of organic solvent, di- and mono-acylglycerol enriched functional oil was produced by lipase-catalyzed glycerolysis in a stirred tank batch reactor. After glycerolysis for 48 hr, functional oil consisted of $47.1\%\;TAG,\;33.6\%\;DAG,\;and\;18.7\%$ MAG. In MAG and DAG, docosahexaenoic acid was found as $10.7\%\;and\;8.1\%$, respectively. During the reaction, total tocopherol content decreased, and $0.065\%$ tocopherols were existed in the functional oil produced after 48hr reaction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.815-826
• /
• 2009

The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.4
• /
• pp.141-146
• /
• 2002

The mechanical and electrical properties of the pressureless sintered SiC-TiB$_2$electroconductive ceramic composites were investigated as functions of the transition metal of TiB$_2$. The result of phase analysis for the SiC-TiB$_2$ composites by XRD revealed $\alpha$-SiC(6H), TiB$_2$, and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phases. The relative density showed the lowest 84.8% for the SiC-TiB$_2$composites added with 39vol.%TiB$_2$. Owing to crack deflection, crack bridging and YAG of fracture toughness mechanism, the fracture toughness showed the highest value of 7.8 MPa.m$^{1}$2/ for composites added with 39vol.%TiB$_2$under a pressureless annealing at room temperature. The electrical resistivity of the SiC-27vol.%TiB$_2$ composites was negative temperature coefficient resistance(NTCR), and the electrical resistivity of the besides SiC-27vol.%TiB$_2$composites was all positive temperature coefficient resistance(PCTR) in the temperature range of $25^{\circ}C$ to $700^{\circ}C$.EX>.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1634-1636
• /
• 2000

The mechanical and electrical properties of the hot-pressed and annealed $\beta$-SiC-$TiB_2$ electroconductive ceramic composites were investigated as function of the liquid forming additives of $Al_{2}O_{3}+Y_{2}O_3$ and the annealing method. Phase analysis of composites by XRD revealed $\alpha$-SiC(6H), $TiB_2$, and YAG($Al_{5}Y_{3}O_{12}$). In pressureless annealing method, the relative density and the mechanical properties of composites were increased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents because YAG of reaction between $Al_{2}O_3$ and $Y_{2}O_3$ was increased. But In pressured annealing method, reaction between $Al_{2}O_3$ and $Y_{2}O_3$ formed YAG but the relative density decreased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents. The electrical resistivity of the composites was all positive temperature coefficient resistance (PTCR) in the temperature range of 25$^{\circ}C$ to 700$^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.22-28
• /
• 2009

We investigated the sintering and electric properties of ZnO-1.0 at% $TeO_2$ (ZT1) and 1.0 at% Mn-doped ZT1(ZT1M1) system. $TeO_2$ itself melts at $732^{\circ}C$ in air but forms the $ZnTeO_3$ or $Zn_2Te_3O_8$ phase with ZnO as increasing temperature and therefore retards the densification of ZnO to $1000^{\circ}C$. In ZT1M1 system, also, the densification of ZnO was retarded up to $1000^{\circ}C$ and then reached > 90% of theoretical density above $1100^{\circ}C$. It was found that a good varistor characteristics(nonlinear coefficient $a{\sim}60$) were developed in ZT1M1 system sintered at $1100^{\circ}C$ due to Mn which known as improving the nonlinearity of ZnO varistors. The results of C-V characteristics such as barrier height (${\Phi}_b$), donor density ($N_D$), depletion layer (W), and interface state density ($N_t$) in ZT1M1 ceramics were $1.8{\times}10^{17}cm^{-3}$, 1.6 V, 93 nm, and $1.7{\times}10^{12}cm^{-2}$, respectively. Also we measured the resistance and capacitance of grain boundaries with temperature using impedance and electric modulus spectroscopy. It will be discussed about the stability and homogeneity of grain boundaries using distribution parameter ($\alpha$) simulated with the Z(T)"-logf plots.

• Clinical and Experimental Reproductive Medicine
• /
• v.15 no.2
• /
• pp.83-92
• /
• 1988

혈액에서 생물학적 활성을 나타내는 (bioavailable) steroid hormone은 주로 비결합형(free form)과 알부민 결합형(albumin-bound form)으로 구성된다. 특히 Testosterone (T)과 5 alpha-Dihydrotestosterone (DHT)의 활성적 분획이 전체의 T, DHT 양에 비해 생리적 현상과 보다 잘 일치하는 것으로 알려지고 있다. 본 연구는 섬광면역측정법(Luminescence immunoassay, LIA)으로 혈청내 활성적 T 및 DHT의 농도의 측정에 이용하고져 하였다. 항체는 T- 또는 DHT-3-CMO-BSA를 항원으로 토끼에 면역주사하여 얻었다. 추적자는 T-3-CMO, DHT-3-CMO에 aminobutylethylisoluminol(ABEI)를 부착시켜 사용하였다. 항체중 IgG분획을 Protein-A-Sepharose CL-4B로 분리한 후 Immunobead(Bio-Rad)에 부착시켜 Solid-phase LIA를 실시하였다. 본 연구에서 LIA는 정확도(accuracy), 정밀도(precision), 감도(sensitivity), 교차반응도(specificity)등을 조사하고, 기존의 방사면역측정법(RIA)과 비교하여 만족할만한 결과를 얻었다. 혈청내 T및 DHT의 활성적 분획의 농도를 측정한 결과는 다음과 같았다. T의 경우는 남성에서 T의 전체량의 33% 이상으로 $7.1{\pm}1.5nmol/l$, 여성에서는 26% 이상으로 $0.28{\pm}0.05nmol/l$이었다. DHT의 활성적 분획은 남성의 경우 $601.7{\pm}85.8pmol/l$, 여성의경우 $52.4{\pm}19.9\;pmol/l$이었다. 이상의 결과를 보아 본 연구에서 이용된 LIA는 혈청내 활성적 농도를 측정하기에 충분하다고 사료된다. 또한 이 방법을 이용하여 여성의 Androgenicity 및 남성 정소기능등의 제어방법에 응용될 수 있을 것으로 판단된다.