The first specimens were sampled across the depth of roll products processed by rapid heating and cooling of the roll, namely, differential heat treatment. The second samples were taken from the non-heat treated roll at different depths. The samples were heat treated following the same temperature history as that at each corresponding location in the roll where the samples were taken. Consequently, both specimens showed the similar microstructure and mechanical properties (tensile, impact and fatigue strength etc.)

전열교환기는 최근 대형건물 및 생산공장 등의 에너지 다소비 장소의 공기조화설비의 에너지 절감기기로서 크게 각광 받고 있다. 그 중에서도 특히 알루미늄 박판에 실리카-겔 분말을 코팅한 Honey comb형 로터는 현열 및 잠열 즉 전열을 흡수할 수 있어 폐에너지 회수용 전열교환기의 전열소자로서 점차 이용되고 있다. 그러나 국내에서는 현재까지 전열교환기의 핵심부품인 상기 로터를 전량 수입에 의존하여 왔다. 본 연구에서는 백륜공업(주)와 공동출연으로 실리카-겔 분말 코팅된 알루미늄 소재 박판만 수입하여 성형공정 기술을 개선, 향상시켜 국산로터의 시제품을 제작하고 그 성능을 시험하여 수입로터와 비교, 평가하였다. 연구결과, 국산개발 알루미늄 로터 시제품의 전열효율이 수입로터 보다 급배기 조건에 따라 1~5%정도 향상되었다. 또한 알루미늄 로터의 최적운전조건(11-13 r.p.m) 및 급배기 공기량비에 대한 적정조건도 연구결과로 얻어졌다.

Several heat treatment were applied to on HSLA steel of type StE47 (German standard) to produce five ferrite microstructures of different strength and at least two different grain sizes respectively. Whereas the ferrite microstructure had a strong influence on yield strength the effect of grain size was negligible. The different strength levels could be explained by regarding the arrangement of dislocations and vanadium carbide particles, and their mutual interaction. Specimens tranformed at $600^{\circ}C$ showed the highest strength levels. In this case precipitation has occured after the $\gamma$- $\alpha$ transformation. Very small VC particles are arranged mostly along dislocation lines. Increasing both, grain size and pearlite volume fraction leads to a remarkable shift of transition temperature which was further enhanced by increasing ferrite strength.

This paper introduces the program to develop graphics-oriented, interactive, computer-aided design modules for machine elements which are developing in both of CAD/CAM Lab., Numerical Control Department of KIMM in Korea and Mechanical Engineering Department of the Ohio State University in U.S.A. The CAD modules are developed to be efficiently performed within the arena of minicomputer-and personal computer-based computer-aided design. In addition, this paper deals with the state-of-the-art in computer-aided design.

본 논문에서는 기계부품 요소의 설계와 분석에 사용되는 대화식 Graphics package KIMMPAK 을 설계.구현하였다. 2차원의 Plotting 루틴과 Device driver로 구성된 KIMMPAK은 TEKTRONIX 그래픽 터미널을 Drive할 수 있는 PLOT10-TCS와, IBM-PC용의 Multi-HALO(MHA¬LO), 그리고 HP Plotter의 PLOT-21 그래픽 라이브러리를 이용하여 Device Driver를 구축하였다. 이로 인한 KIMMPAK의 Device 독립성의 증가는 패키지 자체의 호환성 및 신뢰성을 높이고 있다. KIMMPAK은 VAX/VMS V4 . 2 운영체제하에서 FORTRAN-77의 부프로그램 형태로 구현되어 있으며, IBM-PC에서 사용 가능하도록 MS-FORTRAN으로 변화된 PC용 KIMMPAK이 따로 설계.구현되었다.

Grinding machine, one of the precision machine tool, requires high accuracy in spindle system. But, recent Inspection and Test reports by KIMM shows high inferio¬rity ratio in home-made grinding machines and points out that this is mainly due to the lack of design ability and assembling technique of spindle system. In this paper, therefore, static stiffness, dynamic characteristics, thermal defor¬mation and error motion of spindle system were studied. With these results, we presented the general data to design and assemble the spindle system. Test of spindle system modified by this study showed that several factors affecting machining accuracy were improved largely.

The pressure hull of submersible is a unique structure which requires sophisti¬cated technology in its design and fabrication aspects. In this contribution an attempt has been made to review and analysis the pressure hull design such the most important subject as various geometrical shape, materials, and strength of pressure hull. Comparative study to theoritical analysis through the experimental measure¬ments are also carried out.

엔지니어링 데이터로서 금속재료의 저주기 피로특성 규명은 중요한 의미를 가지며 이에 관한 연구는 1950년대 초부터 본격적으로 시작되었다고 볼 수 있다. 저주기 피로과정은 응력 반복수가 1-20,000회 정도에서 파괴가 일어나는 현상을 주 대상으로 하며 이의 이론적 설명을 위하여 Coffin 1) 과 Manson 2) 의 정리를 요약하여 인용하고자 한다.

Trouble-free operation of cooling water systems is essential for efficient pro¬duction in most industrial facilities. Improper water treatments frequently cause such problems as corrosion, scaling, fouling and slime formation. Water quality, methods of cooling and materials of construction in the cooling circuit should be carefully studied before making selection of the water treatment programs. This paper reviewed cooling water problems encountered frequently in the open recirculating cooling systems and discussed the counter measures how to cope with them.

Recently deck crane of multi purpose cargo vessel (MPCV) is designed to posi¬tion in side instead of in the center line of the upper deck with a view to reduce the transportation cost and shipbuilding cost by shortening the length of ship. In this paper, the crane post was at first designed according to the crane maker’s specification and parent ship and the structure is analysed with Finite Ele¬ment Method. Through the careful reviews on the result of analysis, the final design of crane post was modified. The crane post is designed as a cylindrical in upper part and hexagonal in lower part instead of cylindrical on the whole as before. The connecting part of crane post is designed with the form of mixture of the cylinderical and hexagonal. Since the center of cylindrical and hexagonal section are not on the same line, it is expected to have the stress concentration. So, in order to attenuate the concentrated stress on the connecting part, the upper and lower parts was stiffened by inserting plate to enlarge the area of welding. The structure of deck part includes the tank side floor which is depend on the lower structure of the crane post that would support the force of the crane post by placing with 1.5 frame interval of the vertical plate.