The analytical diffusion model is first formulated and its characteristics are critically reviewed. The flood events during the 1985-1986 flood seasons in the IHP Pyungchang Representative Basin are routed by this model and are compared with those routed by the kinematic wave model. The present model is proven to be an excellent means of taking the backwater effects due to lateral inflow or downstream river stage variations into consideration in channel routing of flood flows. It also requires much less effort and computing time at a desired station compared to any other reliable flood routing methods.

Spatially varied unsteady flow in a groave-like channel of a sloping roof is analyzed by numerical solution of Saint Venant equations. Depth variations are discussed with different slopes and bed roughness of the channel. Time to equilibrium is found to be inversely proportional to the kinematic flow number. The design of roof drainage system by different schemes is included.

Three representative dam-break models, HEC-1, DAMBRK, and SMPDBK were analyzed respectively in their theories and then applied to the failure of Teton Dam for which some observed data exist. From the results of this study, it can be concluded that:(1)HEC-1, which uses the hydrologic routing method, produces stable solutions for almost all the cases that were tested in this study :(2)DAMBRK, which uses the dynamic routing method, is most accurate among the three models ;(3)SMPDBK, which uses the generalized dyanmic routing relationships, is most economical and easily applicable.

The objective of this study is to develop

Manning's roughness factor to flow in sand-bed channels may be divided into the grain roughness factor nd the form roughness factor. The grain roughness factor may be dedermined by using Keulegan's formula. By using available experimental data, it was found there is a unique relationship between the form roughness and the hydraulic radius to sediment particle size ratio for a given value of the Froude number. The form roughness and the bed form may be determined by using this unique relationship. The technique for engineering applications of the results appears to be quite simple.

The characteristics of radial thickness of ice jam at the center part of channel bends were analyzed briefly in this paper. Jam thickness in channel bends increases both toward the inner bank, and dowmstream. For this study, slope at the jam's underside was assumed to be liner with similarity of radial slope of bed in alluvial bends. Radial slope at the jam's underside in floating ice elements was estimated using the force equilibrium theory in the radial direction. The eqution which can be estimated the radial slope of ice jam was suggested using Falcon and Kennedy's bed layer theory. Experimental data, which were measured at the center part of cross-section in a single 180-degree bend, were compared to the calculated values using the suggested equtions. The result shows that the calcultated values were smaller than the measured ones. Ot is considered that the estimated value of shear stress in the radial direction may be smaller than the actual and two-layer model may be not suibable for alluvial bend flow.

A literature review is made on the numerical models of wave-induced currents. The major processes of the flow system are wave breaking, bottom friction of combined wave-current flow and mixing processes primarily caused by wave breaking as well as the flow fields of waves and currents themselves. The survey is given to each item with great emphasis on numerical implication as well as physical mechanism. As noted is the importance in recent investigations, a brief treatment is also given on the currents driven by random or spectral waves.

An extensive biological nutrient removal pilot plant study of anoxic/anaerobic/ aerobic treatment process was conducted to eastblish an optimum operational mode using primary dffluent. Two operational modes, (1) Qr/Q was 3.0 and maintaining EMLSS of 3100 mg/L in which the best operational results were obtained from previous bench scale study using synthetic wastewater (2) Qr/Q was 0.5 and EMLSS of 2200 mg/L which was compatible with the main plant, were Compared and evaluated for removal of nitrogen and/or phosphorous under field conditions. The nitrogen removal increased with increasing recycle ratios, but the phosphorous removal revealed more consistent results with 83percent removal efficiency in the second mode compared with 80 percent in the first mode. Above all, the two modes equally showed good BOD and nitrogen removals by nitrification-denitrification processes. It was also observed that no scum formed in the pilot plant and the sludge exhibited excellent settling characteristic all the time. The modified biological nutrient removal train can be adopted to the main plant without any major changes of their operational modes.