Dental treatment for the disabled should be a customized that considers the characteristics and degree of cooperation of each disabled patient. There are additional considerations during implant treatment and tooth extraction in disabled patients. Since some brain lesion disorder or cardiac disease patients may be taking antiplatelet or anticoagulant medications, it is necessary to evaluate whether these medications should be discontinued before an invasive procedure. Precautions should be taken for patients with heart valve disease considering the risk of infective endocarditis, especially during invasive dental procedures. Moreover, disabled patients may have difficulty in following instructions and cautions. There are specific considerations for each stage of implant treatment in disabled patients. In the case of patients who are in the pre- or post-transplant state, it is necessary to assess their general condition and oral disease due to the risk of infection. Since disabled patients with various systemic diseases may visit the dental clinic, it is important to understand their characteristics and treatment process in order to flexibly adjust the dental treatment plan accordingly.

Xerostomia is defined as the subjective complaint of dry mouth with or without hyposalivation, which is insufficient salivary secretion from salivary gland. Xerostomia can lead to multiple oral symptoms such as dental caries, halitosis, burning mouth syndrome, and oral candidiasis, which can significantly impact the well-being of patients, especially in geriatric patients who may already have compromised health. Clinical findings of xerostomia include decreased salivary flow and alterations in salivary composition. These changes can lead to various oral health problems such as dental caries, periodontitis, swallowing and speaking difficulties, taste disturbances, halitosis, mucosal diseases, and burning mouth syndrome. Recognizing these clinical manifestations is essential for early diagnosis and appropriate management. Although several reasons and risk factors have been suggested for xerostomia such as aging, chemo-radiation therapy, systemic disease, and Sjögren's syndrome, the polypharmacy is recently highlighted especially in elderly patients. Understanding the etiology and risk factors associated with xerostomia is crucial for effective management. To manage xerostomia patients, a multidisciplinary guideline should be established beyond dental care. Through this literature review, we summarized consideration for diagnostic, therapeutic, nursing essentials for the clinical guideline. By addressing the underlying causes and implementing appropriate treatment strategies, healthcare professionals can improve the quality of life for individuals suffering from xerostomia.

Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment. Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37℃. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the "stressed" position in a 37℃ water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days. Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level. Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.

Purpose: Culture-based methods for microbiological diagnosis and antibiotic susceptibility tests have limitations in the management of orofacial infections. We aimed to profile pus microbiota and identify antibiotic resistance genes (ARGs) using a culture-independent approach. Materials and Methods: Genomic DNA samples extracted from the pus specimens of two patients with orofacial abscesses were subjected to shotgun sequencing on the NovaSeq system. Taxonomic profiling and prediction of ARGs were performed directly from the metagenomic raw reads. Result: Taxonomic profiling revealed obligate anaerobic polymicrobial communities associated with infections of odontogenic origins: the microbial community of Patient 1 consisted of one predominant species (Prevotella oris 74.6%) with 27 minor species, while the sample from Patient 2 contained 3 abundant species (Porphyromonas endodontalis 33.0%; P. oris 31.6%; and Prevotella koreensis 13.4%) with five minor species. A total of 150 and 136 putative ARGs were predicted in the metagenome of each pus sample. The coverage of most predicted ARGs was less than 10%, and only the CfxA2 gene identified in Patient 1 was covered 100%. ARG analysis of the seven assembled genome/metagenome datasets of P. oris revealed that strain C735 carried the CfxA2 gene. Conclusion: A metagenomics-based approach is useful to profile predominantly anaerobic polymicrobial communities but needs further verification for reliable ARG detection.

Purpose: We aimed to investigate the objective cutoff values of unstimulated flow rates (UFR) and stimulated salivary flow rates (SFR) in patients with xerostomia and to present an optimal machine learning model with a classification and regression tree (CART) for all ages. Materials and Methods: A total of 829 patients with oral diseases were enrolled (591 females; mean age, 59.29±16.40 years; 8~95 years old), 199 patients with xerostomia and 630 patients without xerostomia. Salivary and clinical characteristics were collected and analyzed. Result: Patients with xerostomia had significantly lower levels of UFR (0.29±0.22 vs. 0.41±0.24 ml/min) and SFR (1.12±0.55 vs. 1.39±0.94 ml/min) (P<0.001), respectively, compared to those with non-xerostomia. The presence of xerostomia had a significantly negative correlation with UFR (r=-0.603, P=0.002) and SFR (r=-0.301, P=0.017). In the diagnosis of xerostomia based on the CART algorithm, the presence of stomatitis, candidiasis, halitosis, psychiatric disorder, and hyperlipidemia were significant predictors for xerostomia, and the cutoff ranges for xerostomia for UFR and SFR were 0.03~0.18 ml/min and 0.85~1.6 ml/min, respectively. Conclusion: Xerostomia was correlated with decreases in UFR and SFR, and their cutoff values varied depending on the patient's underlying oral and systemic conditions.

Purpose: Hyperdontia is a developmental disorder of the oral cavity. Mesiodens refers to the hyperdontia located between the maxillary central incisors. During the surgical procedure, the anesthetic method for pain control should be considered along with factors related to the surgery itself. The purpose of this study was to evaluate the effect of the impacted position of the mesiodens on the selection of sedation method and to suggest incisive foramen as a brief reference. Materials and Methods: This study included 126 patients who were scheduled for extraction of mesiodens. The selection criteria included patients with one palatally impacted inverted mesiodens accessible from the palatal gingival margin, and those with good cooperation potential in order to control for clinical information. Using cone beam computed tomography, vertical, horizontal, and palatal positional factors were measured, and the anesthetic method was determined by two examiners. The patients were grouped into vertical and horizontal groups based on the position of the incisive foramen. Data were statistically analyzed using the Mann-Whitney test, the chi-square test, and logistic regression analysis. Result: All positional factors differed between the outpatient and inpatient anesthetic groups. The vertical minimum distance from the alveolar ridge to the mesiodens (Va) and the minimum distance from the palatal surface to the crown tip of the mesiodens (Tc) were factors affecting the choice of anesthetic method. The distribution of the vertical and horizontal positional groups differed between the outpatient and inpatient anesthetic groups. Conclusion: The incisive foramen can be used as a brief reference to determine the appropriate anesthetic method. Referral for inpatient anesthesia may be a priority if they are in the V₂H₂ group with Va ≥5 mm, and Tc ≥6 mm, and outpatient sedation may be considered if they are in the V₁H₁ group with Va ≤1.5 mm, and Tc ≤2.5 mm.

Purpose: Cention N (Ivoclar Vivadent) was a recently introduced alkasite-based restorative material that was expected to replace amalgam and glass ionomer cement. This material was an esthetic restoration with adequate mechanical strength and release of fluoride and calcium. The purpose of this study was to measure the water sorption and water solubility of Cention N and evaluate its long-term durability compared to other esthetic restorations (Resin-Modified Glass Ionomer cement [RMGIC], Giomer, Composite Resin). Materials and Methods: Twenty specimens each of Cention N (CN), Resin Modified-Glass Ionomer Cement (FJ), Giomer (BF), and Composite Resin (FZ) were made. After each specimen was completely dried in a desiccator for 24 hours using a vacuum pressure pump, the specimen was weighed (m1). After that, the specimen was immersed in distilled water at 37℃ for 7 days, stored in a drying oven, and weighed (m2). After drying completely for 24 hours in a desiccator, the specimen was weighed (m3) to calculate the water absorption and water solubility using Formulas 1 and 2. The measured values were statistically processed and analyzed using SPSS, and the significance level was set at 0.05. Result: When measuring water sorption, FJ (122.61 ㎍/mm³) showed significantly higher water sorption than CN (35.42 ㎍/mm³) (P<0.05). There was no significant difference between FZ (18.03 ㎍/mm³) and BF (14.76 ㎍/mm³) (P=0.930). When measuring water solubility, CN (6.65 ㎍/mm³) showed significantly higher water solubility than FJ (1.47 ㎍/mm³) (P<0.05). Conclusion: Cention N had lower water sorption than RMGIC, but higher water solubility, indicating that it is more vulnerable to moisture and has lessened long-term durability.

We report two rare cases of extensive bilateral subcutaneous emphysema that occurred during ordinary dental procedures. An air-driven high-speed handpiece, routinely used in dental procedures may cause subcutaneous emphysema when high pressure air is introduced into the loose connective tissues below the dermal layer. The first case occurred with surgical extraction of the lower third molar. The air introduced into the fascial spaces near the surgical field spread to the contralateral spaces, as well as the neck and chest areas. The second case also showed extensive bilateral subcutaneous emphysema caused by the introduction of compressed air from the handpiece during crown preparation without any invasive procedure. Cases where the emphysema extends beyond the treatment site to involve the contralateral cervicofacial areas have been rarely reported. Predicting the occurrence of subcutaneous emphysema is difficult, so it is important to exercise caution during routine dental treatment. If significant bilateral cervicofacial swelling is suspected to be due to subcutaneous emphysema, prompt diagnosis with securing the patient's airway will be necessary.

This report presents a case of successful treatment of skeletal Class III malocclusion with transverse discrepancy in adult by surgery-first approach. Traditionally dental decompensation is necessary prior to surgery in 2-jaw surgery to correct transverse and rotational discrepancy. However, the hyrax-type palatal expansion appliance was used to improve maxillary expansion accuracy and postoperative stability in this surgery-first approach (segmental Le Fort I osteotomy and mandibular setback surgery). It was established to be an effective means of precisely predicting postoperative occlusion and achieving stable retention after surgery of skeletal Class III malocclusion with maxillary transverse discrepancy.

McCune-Albright syndrome (MAS) is a disease with clinical features such as fibrous dysplasia in which normal bone tissue is replaced with abnormal fibrous tissue, abnormalities in the endocrine system, and cafe-au-lait spots on the skin. Although MAS patients are generally known to have reduced bone healing ability, postoperative healing after invasive surgical extraction is still not clearly known due to its relatively rare occurrence. In this report, a 25-year-old female patient, who had been diagnosed with MAS and had a history of abnormal bone healing after fractures of her extremities, underwent surgical extraction of the mandibular third molar with surrounding bone removal. Postoperatively, the patient showed favorable soft tissue and bone healing at the surgical site without abnormal findings such as newly developed fibro-osseous lesions, postoperative infection, or osteomyelitis.