과제정보
The authors are grateful for the support of this research by the National Science and Technology Major Project (Grant No. 2011ZX06901-003).
참고문헌
- A. Koster, R. Matzie, D. Matzner, Pebble-bed modular reactor: a generation IV high-temperature gas-cooled reactor, Proc. Inst. Mech. Eng. A J. Power Energy (2004).
- H. Wu, N. Gui, X.T. Yang, J.Y. Tu, Parameter analysis and wall effect of radiative heat transfer for CFD-DEM simulation in nuclear packed pebble bed, Exp. Computat. Multiphase Flow 3 (2021) 250-257. https://doi.org/10.1007/s42757-020-0058-2
- Z. Wu, D. Lin, D. Zhong, The design features of the HTR-10, Nucl. Eng. Des. 218 (1) (2002) 25-32. https://doi.org/10.1016/S0029-5493(02)00182-6
- I.A.E. Agency, Current Status and Future Development of Modular High Temperature Gas Cooled Reactor Technology[R], International Atomic Energy Agency, 2001, pp. 1-268.
- Z. Zhang, S. Yu, Future HTGR developments in China after the criticality of the HTR-10, Nucl. Eng. Des. 218 (1-3) (2002) 249-257. https://doi.org/10.1016/S0029-5493(02)00204-2
- Z. Zhang, Y. Dong, F. Li, et al., The shandong Shidao Bay 200 MWe high-temperature gas-cooled reactor pebble-bed module (HTR-PM) demonstration power plant: an engineering and technological innovation, Engineering 2 (1) (2016) 112-118. https://doi.org/10.1016/J.ENG.2016.01.020
- Z. Zhang, Z. Wu, D. Wang, et al., Current status and technical description of Chinese 2 x 250 MWth HTR-PM demonstration plant, Nucl. Eng. Des. 239 (7) (2009) 1212-1219. https://doi.org/10.1016/j.nucengdes.2009.02.023
- R.E. Nightingale, Nuclear graphite[M], Nuclear graphite, 1962.
- T. Korkut, A molecular dynamics study about graphite and boron coated graphite at reactor temperatures, Ann. Nucl. Energy 63 (2014) 100-106. https://doi.org/10.1016/j.anucene.2013.07.036
- Z. Xiangwen, L. Zhenming, Z. Jie, et al., Preparation of spherical fuel elements for HTR-PM in INET, Nucl. Eng. Des. 263 (2013) 456-461. https://doi.org/10.1016/j.nucengdes.2013.07.001
- C. Tang, Y. Tang, J. Zhu, et al., Design and manufacture of the fuel element for the 10 MW high temperature gas-cooled reactor, Nucl. Eng. Des. 218 (1) (2002) 91-102. https://doi.org/10.1016/S0029-5493(02)00201-7
- Y. Yang, Z. Luo, X. Jing, et al., Fuel management of the HTR-10 including the equilibrium state and the running-in phase, Nucl. Eng. Des. 218 (1) (2002) 33-41. https://doi.org/10.1016/S0029-5493(02)00183-8
- X. Zhou, Y. Tang, Z. Lu, et al., Nuclear graphite for high temperature gas-cooled reactors, N. Carbon Mater. 32 (3) (2017) 193-204. https://doi.org/10.1016/S1872-5805(17)60116-1
- Z. Zhang, Z. Wu, Y. Sun, et al., Design aspects of the Chinese modular high-temperature gas-cooled reactor HTR-PM, Nucl. Eng. Des. 236 (5-6) (2006) 485-490. https://doi.org/10.1016/j.nucengdes.2005.11.024
- Z. Zhang, Y. Sun, Economic potential of modular reactor nuclear power plants based on the Chinese HTR-PM project, Nucl. Eng. Des. 237 (23) (2007) 2265-2274. https://doi.org/10.1016/j.nucengdes.2007.04.001
- X.W. Zhou, Y. Yang, J. Song, et al., Carbon materials in a high temperature gas-cooled reactor pebble-bed module, N. Carbon Mater. 33 (2) (2018) 97-108. https://doi.org/10.1016/S1872-5805(18)60328-2
- J. Zhang, J. Zhao, J. Tong, Study on Probabilistic Safety Goals for Multimodule High-Temperature Gas-Cooled Reactor Based on Chinese Societal Risks[J], Science and Technology of Nuclear Installations, 2021.
- S. Timoshenko, History of Strength of Materials: with a Brief Account of the History of Theory of Elasticity and Theory of Structures[M], Courier Corporation, 1983.
- A. Samuelsson, O.C. Zienkiewicz, History of the stiffness method, Int. J. Numer. Methods Eng. 67 (2) (2006) 149-157. https://doi.org/10.1002/nme.1510
- A. Halyavkin, I. Razov, V. Mamontov, et al., Determination of stiffness coefficient of stern shaft bearing, IOP Conf. Ser.: Earth Environ. Sci., IOP Publ. 90 (1) (2017), 012078.
- Z.P. Bazant, Size effect on structural strength: a review, Arch. Appl. Mech. 69 (1999) 703-725. Springer. https://doi.org/10.1007/s004190050252
- Z.P. Bazant, G. Lewis, Scaling of structural strength, Appl. Mech. Rev. 56 (5) (2003) B70-B72. https://doi.org/10.1115/1.1584419
- W. Xu, J. Sun, Y. Zheng, et al., The influence of nuclear graphite oxidation on air ingress accident of HTR-PM, Ann. Nucl. Energy 110 (2017) 1242-1248. https://doi.org/10.1016/j.anucene.2017.08.028
- H. Hertz, On the contact of solid elastic bodies and on hardness, J. Math. 92 (1881) 156-171.
- J. Arregui Mena, L. Margetts, D.V. Griffiths, et al., Recent Advances on Microstructural Characterization and Modeling of Nuclear graphite[R], Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States), 2021.