DOI QR코드

DOI QR Code

UHPC 비정형 패널 제작 시 수화열에 의한 PCM 거푸집의 형상오차 분석

Evaluation of Shape Deviation in Phase Change Material Molds Subjected to Hydration Heat During Ultra-High Performance Concrete Free-form Panel Fabrication

  • Kim, Hong-Yeon (Graduate School, Hanbat National University) ;
  • Cha, Jae-Hyeok (Graduate School, Hanbat National University) ;
  • Youn, Jong-Young (Department of Architectural Engineering, Hanbat National University) ;
  • Kim, Sung-Jin (Department of Architectural Engineering, Hanbat National University) ;
  • Lee, Donghoon (Department of Architectural Engineering, Hanbat National University)
  • 투고 : 2023.03.28
  • 심사 : 2023.04.24
  • 발행 : 2023.06.20

초록

비정형 건축물은 외부면이 다양한 곡선이기 때문에 비정형 거푸집은 맞춤제작되어 사용된다. 비정형 거푸집 제작에 있어 재활용이 가능한 Phase Change Material(PCM)과 곡률구현에 용이한 Ultra-High Performance Concrete(UHPC)가 사용된다. 그러나 PCM은 약 58~64℃가 융점이며, UHPC의 수화열로 PCM 거푸집이 손상될 수 있어 실험을 통해 형상을 확인한다. 실험은 제작한 PCM 거푸집에 Silicone sheet 3mm를 설치한 (A)와 설치하지 않은 (B) 거푸집에 UHPC를 타설한다. 실험결과 (A) 3.793mm, (B) 5.72mm가 측정되었으며, (B) 거푸집이 수화열에 취약한 것으로 분석되었다. 이러한 연구는 초고강도 비정형 패널 및 PCM 거푸집 제작 관련 기초자료로 활용될 것으로 기대된다.

The construction of free-form structures with intricate curved exteriors necessitates the use of bespoke molds. To fulfill this requirement, a blend of Phase Change Material(PCM) and Ultra-High Performance Concrete(UHPC) is utilized. PCM endows the solution with recyclability, while UHPC facilitates the effortless execution of curvature in the mold fabrication process. However, it's worth mentioning that the melting point of PCM hovers around 58-64℃, and the heat emanating from UHPC's hydration process can potentially jeopardize the integrity of the PCM mold. Hence, experimental validation of the mold shape is a prerequisite. In the conducted experiment, UHPC was poured into two distinct mold types: one that incorporated a 3mm silicone sheet mounted on the fabricated PCM mold(Panel A), and the other devoid of the silicone sheet(Panel B). The experimental outcomes revealed that Panel A possessed a thickness of 3.793mm, while Panel B exhibited a thickness of 5.72mm. This suggests that the mold lacking the silicone sheet(Panel B) was more susceptible to the thermal effects of hydration. These investigations furnish invaluable fundamental data for the manufacturing of ultra-high strength irregular panels and PCM molds. They contribute substantially to the enrichment of comprehension and application of these materials within the realm of construction.

키워드

과제정보

This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government (MSIT)(No. 2020R1C1C1012600).

참고문헌

  1. Kim JH, Kim JY. Effects of trip factors relating to dongdaemun design plaza & park (DDP) on visitor' satisfaction and revisit intention. Korean Society of Basic Design & Art. 2015 Apr;16(2):99-112.
  2. Seo WS, Yu SJ. Design and constriction for the free-form building - Focusing on the case of unstructured 3d exterior metal panel construction buildings through the dongdaemun design plaza -. Autumn annual conference of architectural institute of korea; 2016 Oct 4-6, Busan, Korea. Seoul (Korea): The Architectural Institute of Korea; 2016. p. 1525-8.
  3. Kim CK, Kim CJ. A study on expressive characteristics of informal form in the contemporary architecture. Journal of The Architectural Institute of Korea. 2003 Apr;19(4):101-8.
  4. Ahn HJ, Lee DY, Ji WJ, Lee WJ, Cho HH. Development of method for manufacturing freeform EPS forms using sloped-LOM Type 3D Printer. Journal of the Korea Institute of Building Construction. 2020 Apr;20(2):171-81. https://doi.org/10.5345/JKIBC.2020.20.2.171
  5. Lee DH, Kim SK. Development of PCM-enabled a typical concrete segment production process. Journal of the Regional Association of Architectural Institute of Korea. 2015 Feb;17(1):219-24.
  6. Park YM, Kim HW, Park KH, Kim SJ. Study on construction example of free formed curved facade using external UHPC panels -Focused on the remodeling construction of samsung-dong KEB hana bank -. Proceedings of the Korean Institute of Building Construction Conference; 2017 May 17-19; Gyeongju, Korea. seoul (Korea): the Korea Institute of Building Construction; 2017. p. 62-3.
  7. Cho CG, Kim HY, Kim HG. Conceptual approach to applications of reinforced UHPC non-uniform solid and truss beams. Journal of the Korea Concrete Institute. 2020 Dec;32(6):593-600. https://doi.org/10.4334/JKCI.2020.32.6.593
  8. Cha SW, Kim KH, Kim SW, Park JJ, Bae GS. Models for hydration heat development and mechanical properties of ultra high performance concrete. Journal of the Korea Concrete Institute. 2010 Jun;22(3):389-97. https://doi.org/10.4334/JKCI.2010.22.3.389
  9. Youn JY, Yun JY, Kim SJ, Han BJ, Do SL, Lee DH. An Analytical study of the latest trends of free-form molds. Sustainability. 2022 Mar;14(5):3084. https://doi.org/10.3390/su14053084
  10. Gramazio F, Kohler M, Willmann J, Oesterle S, Vansteenkiste A, Mirjan A. Zero waste free-form formwork. Proceedings of the Second International Conference on Flexible Formwork; 2012 Jun 27-29; Bath, United Kingdom. Claverton Down (United Kingdom): BRE CICM, University of Bath; 2012. p. 258-67.
  11. Kang HK, Kim SH, Kim MS, Hong SG. Impact resistance of UHPC exterior panels under high velocity impact load. Journal of the Korea Concrete Institute. 2016 Aug;28(4):455-62. http://dx.doi.org/10.4334/JKCI.2016.28.4.455