Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

How to incorporate human failure event recovery into minimal cut set generation stage for efficient probabilistic safety assessments of nuclear power plants

  • Received : 2020.11.05
  • Accepted : 2021.04.23
  • Published : 2022.01.25
Download PDF
⟨ Previous Next ⟩

Abstract

Human failure event (HFE) dependency analysis is a part of human reliability analysis (HRA). For efficient HFE dependency analysis, a maximum number of minimal cut sets (MCSs) that have HFE combinations are generated from the fault trees for the probabilistic safety assessment (PSA) of nuclear power plants (NPPs). After collecting potential HFE combinations, dependency levels of subsequent HFEs on the preceding HFEs in each MCS are analyzed and assigned as conditional probabilities. Then, HFE recovery is performed to reflect these conditional probabilities in MCSs by modifying MCSs. Inappropriate HFE dependency analysis and HFE recovery might lead to an inaccurate core damage frequency (CDF). Using the above process, HFE recovery is performed on MCSs that are generated with a non-zero truncation limit, where many MCSs that have HFE combinations are truncated. As a result, the resultant CDF might be underestimated. In this paper, a new method is suggested to incorporate HFE recovery into the MCS generation stage. Compared to the current approach with a separate HFE recovery after MCS generation, this new method can (1) reduce the total time and burden for MCS generation and HFE recovery, (2) prevent the truncation of MCSs that have dependent HFEs, and (3) avoid CDF underestimation. This new method is a simple but very effective means of performing MCS generation and HFE recovery simultaneously and improving CDF accuracy. The effectiveness and strength of the new method are clearly demonstrated and discussed with fault trees and HFE combinations that have joint probabilities.

Keywords

Acknowledgement

This work was supported by the Korea Foundation of Nuclear Safety (KoFONS) grant funded by the Nuclear Safety and Security Commission (NSSC), Republic of Korea (No. 2101062), and also supported by the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT, Republic of Korea (No. 1711126864).

References

  1. W.S. Jung, S.H. Han, J.J. Ha, A fast BDD algorithm for the reliability analysis of large coherent systems, Reliab. Eng. Syst. Saf. 83 (3) (2004) 369-374. https://doi.org/10.1016/j.ress.2003.10.009
  2. W.S. Jung, S.H. Han, J.J. Ha, An overview of the fault tree solver FTREX, in: 13th International Conference on Nuclear Engineering, Beijing, China, May 16-20, 2005.
  3. W.S. Jung, ZBDD algorithm features for an efficient probabilistic safety assessment, Nucl. Eng. Des. 239 (10) (2009) 2085-2092. https://doi.org/10.1016/j.nucengdes.2009.05.005
  4. C.L. Smith, R.D. Fowler, SAPHIRE 'Recover Cut Sets' editor: a technique for automating the manipulation of PRA cut sets, Reliab. Eng. Syst. Saf. 54 (1996) 47-52. https://doi.org/10.1016/S0951-8320(96)00106-8
  5. W.S. Jung, A method to improve cutset probability calculation in probabilistic safety assessment of nuclear power plants, Reliab. Eng. Syst. Saf. 134 (2015) 134-142. https://doi.org/10.1016/j.ress.2014.10.019
  6. Snl, Nureg/Cr-1278, Handbook of Human Reliability Analysis with Emphasis on Nuclear Power Plant Applications, 1983.
  7. M. Cepin, DEPEND-HRA-a method for consideration of dependency in human reliability analysis, Reliab. Eng. Syst. Saf. 9 (2008) 1452-1460. https://doi.org/10.1016/j.ress.2007.10.004
  8. Epri, A Process for HFE Dependency Analysis and Consideration on Use of Minimum Values for Joint Human Error Probabilities, Product ID 3002003150, 2016.
  9. Epri, HRA Calculator Ver. 5.2, Product ID 3002010680, 2017.
  10. A.M. Arigi, G. Park, J. Kim, Dependency Analysis Method for Human Failure Events in Multi-Unit Probabilistic Safety Assessments, vol. 203, 2020.
  11. Epri, Phoenix Architect Module Version 1.0b, Software Manual, Software Product ID 3002020050, 2020.
  12. S.H. Han, K.M. Oh, H.G. Lim, J.E. Yang, AIMS-MUPSA Software Package for Multi-Unit PSA, vol. 50, 2018, pp. 1255-1265.
  13. H. Seok, D.K. Kim, H.K. Lim, S.K. Kang, Development of an integrated software for reliability analysis and PSA, SAREX, in: Proceedings of the European Safety and Reliability Conference, ESREL, 2005.