Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on Concrete Bond Behavior According to Grid Spacing of CFRP Grid Reinforcement

격자형 CFRP 보강재의 격자간격에 따른 콘크리트 부착거동에 대한 실험적 연구

  • 노치훈 (경상국립대학교 건설시스템공학과) ;
  • 장낙섭 (경상국립대학교 건설시스템공학과) ;
  • 오홍섭 (경상국립대학교 건설시스템공학과)
  • Received : 2022.09.29
  • Accepted : 2022.11.09
  • Published : 2022.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, as the service life of structures increased, the load-carrying capacity of deteriorated reinforced concrete, where corrosion of reinforcing bars occurs due to various causes, is frequently decreased. In order to address this problem, many studies on the bond characteristic of FRP (Fiber Reinforced Polymer) bars with corrosion resistance, light weight and high tensile strength have been conducted, however there are not many studies on the bond characteristic of grid-typed CFRP embedded in concrete. Therefore, in order to evaluate the bond characteristics of grid-typed CFRP and its usability as a substitute for steel rebar, a pull-out test is performed using the longitudinal bond length and transverse grid length of the grid-typed CFRP as variables. Through the pull-out test, the bond load-slip curve of the grid-typed CFRP is derived, and the bond behavior is analyzed. The total bond load equation is proposed as the sum of the bond force of the longitudinal bond length and the shear force of the grid in the transverse direction. Also, expressing the area of the bond load-slip curve as total work, the change in dissipated energy with respect to the slip is analyzed to examine the effect of the tranverse grid on the bond force.

최근 구조물의 사용연한이 증가함에 따라 다양한 요인에 의해 철근이 부식되어 구조물의 내하력이 감소하는 문제들이 발생하고 있다. 이를 해결하기 위하여 내식성, 경량성, 고인장강도를 갖는 FRP 보강근의 부착특성에 대한 연구가 활발히 진행중이나, 콘크리트에 매립된 격자형 CFRP 보강재의 부착특성에 관한 연구는 미흡한 실정이다. 따라서 격자형 CFRP 보강재를 철근의 대체재로 사용하고 사용성 측면에서 부착특성을 평가하기 위해, 격자형 CFRP 보강재의 종방향 부착길이와 횡방향 격자길이를 변수로 하여 직접인발시험을 수행하였다. 이를 통해 격자형 CFRP 보강재의 부착하중-슬립 곡선을 도출하였으며, 부착거동을 분석하였다. 총 부착하중 식은 종방향 부착길이의 부착력과 횡방향 격자의 전단력의 합으로 제안하였으며, 부착하중-슬립곡선의 면적을 전체 일로 표현하여 슬립량에 대한 에너지 소산량의 변화를 분석하여 횡방향 격자가 부착력에 미치는 영향에 대하여 검토하였다.

Keywords

Acknowledgement

본 연구는 교통과학기술진흥원의 탄소 고분자 부식ZERO 철근대체재 기술개발 연구사업(21CFRP-C163399-01)의 지원에 수행되었습니다.

References

  1. American Concrete Institute. Committee 440. (2006), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars: ACI 440.1 R-06. American Concrete Institute.
  2. ACI, A. (2004), 440.3 R-04: Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures. American Concrete Institute, Farmington Hills, USA.
  3. Rizkalla, S., and Mufti, A. (2001), Reinforcing Concrete with Fibre Reinforced Polymers. ISIS.
  4. ASTM D3916-16. (2016), Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod. ASTM D3916-16.
  5. ASTM standard D7913/D7913M. (2014), Standard test method for bond strength of fiber-reinforced polymer matrix composite bars to concrete by pullout testing.
  6. Lee, Y. H., Choi, J. H., Kim, H. C., Kim, D. H., and Na, S. J. (2008), Experimental study on bond strength of CFRP rebar in concrete, Journal of the Architectural Institute of Korea Structure and Construction, 24(11), 53-60.
  7. Ko, S.-H. (2014), Experimental study for GFRP reinforced concrete beams without stirrups, Journal of the Korea institute for Structural Maintenance and Inspection, 18(2), 21-29. https://doi.org/10.11112/JKSMI.2014.18.2.021
  8. Lee, J. Y., Yi, C. K., Kim, T. Y., Park, J. S., and Park, Y. H. (2008), Bond failure surface of glass fiber reinforced polymer bars, Journal of the Korea Concrete Institute, 20(3), 383-391. https://doi.org/10.4334/JKCI.2008.20.3.383
  9. Jang, N. S., Kim, Y. H., and Oh, H. S. (2021). Analysis of failure behavior of FRP rebar reinforced concrete slab based on FRP reinforced ratio, Journal of the Korea Institute for Structural Maintenance and Inspection, 25(5), 173-181. https://doi.org/10.11112/JKSMI.2021.25.5.173
  10. Kim, T. Y., Park, J. S., Lee, J. Y., and Kim, K. H. (2005), Effect of compressive strength of concrete on the bond strength of glass fiber reinforcement plastic bars, Journal of the Architectural Institute of Korea, Structural Division, 21(12), 69-76.
  11. Belarbi, A., and Wang, H. (2004, January), Bond-slip response of FRP reinforcing bars in fiber reinforced concrete under direct pullout. In Proceedings of ICFRC-international conference on fiber composites, high performance concretes and smart materials, Chennai, India (pp. 409-19).
  12. Bischoff, P. H., and Paixao, R. (2004), Tension stiffening and cracking of concrete reinforced with glass fiber reinforced polymer (GFRP) bars, Canadian Journal of Civil Engineering, 31(4), 579-588. https://doi.org/10.1139/l04-025
  13. Wei, W., Liu, F., Xiong, Z., Lu, Z., and Li, L. (2019). Bond performance between fibre-reinforced polymer bars and concrete under pull-out tests, Construction and Building Materials, 227, 116803. https://doi.org/10.1016/j.conbuildmat.2019.116803
  14. Baena, M., Torres, L., Turon, A., and Barris, C. (2009), Experimental study of bond behaviour between concrete and FRP bars using a pull-out test, Composites Part B: Engineering, 40(8), 784-797. https://doi.org/10.1016/j.compositesb.2009.07.003
  15. Vilanova, I., Baena, M., Torres, L., and Barris, C. (2015), Experimental study of bond-slip of GFRP bars in concrete under sustained loadsm Composites Part B: Engineering, 74, 42-52. https://doi.org/10.1016/j.compositesb.2015.01.006
  16. Wang, B., Uji, K., Wu, T., Dai, H., Yan, D., and Guo, R. (2019), Experimental investigation of stress transfer and failure mechanism between existing concrete and CFRP grid-sprayed PCM, Construction and Building Materials, 215, 43-58. https://doi.org/10.1016/j.conbuildmat.2019.04.168
  17. Guo, R., Pan, Y., Cai, L., and Hino, S. (2018), Bonding behavior of CFRP grid-concrete with PCM shotcrete. Engineering Structures, 168, 333-345. https://doi.org/10.1016/j.engstruct.2018.04.059
  18. Jung, K. S., Park, K. T., You, Y. J., Kim B. C., and Park, J. S. (2018), Comparisons of bond characteristics between FRP hybrid bars and deformed steel bars. Journal of the Korean Society for Advanced Composite Structures, 9(2), 37-42. https://doi.org/10.11004/kosacs.2018.9.2.037
  19. Kumar, K. V., Safiulla, M., and Ahmed, A. K., Experimental Characterization of ILSS of CFRP Laminates.