과제정보
본 연구는 국토교통부/국토교통과학기술진흥원이 시행하고 한국도로공사가 총괄하는 "스마트건설기술개발 국가R&D사업(과제번호 20SMIP-A158708-01)"의 지원으로 수행되었습니다.
참고문헌
- Bae, J. S. (2011). Reinforcement steel design applying set-based design methodology to flat plate in the structural BIM (S-BIM) environment, Masters Thesis Hanyang University, pp. 81-86.
- Cho, Y. G, Kim, H., G., Lim, S. (2020). Domestic Construction Industry Outlook in the Fourth Industrial Era, Korea Institute of Ecological Architecture and Environment, 20(4), pp. 89-94.
- Choi, J. S., Open BIM & Design Information Quality Control, Goomi Book: Seoul, Korea, (2012).
- Choi, J. (2020). The Comparative Analysis of 2D And BIM-Based RC Quantity Take-off And Error Rate, Master thesis Gyeongsang National University.
- Hwang, Y., Yang, K., Sim, J., Choi, Y. (2018). Evaluation of Axial Compressive Performance of Section Enlargement Strengthening Columns with Prefabricated Reinforcement Units in the Jacket Section, Journal of the Korea Concrete Institute, 30(6), pp. 609-616. https://doi.org/10.4334/jkci.2018.30.6.609
- Hwang, Y., Yang, K., Sim, J. (2020). Evaluation on the Structural Performance of Reinforced Concrete Columns with Supplementary Prefabricated V-ties, Journal of the Korea Concrete Institute, 32(3), pp. 225-232. https://doi.org/10.4334/JKCI.2020.32.3.225
- Jang, J. W. (2013). Development of Rebar Placement System of R.C Foundation using Lean Design Technique based on Structural BIM (S-BIM), Masters Thesis Hanyang University, pp. 47-48.
- Jeon, C. (2011). Design and Development of BIM Based Rebar Shop Drawing System, Master thesis Daejeon University.
- Kim, D., Kim, O. (2003). Application method of structural welded-wire-faric for practical use, The Architectural Institute of Korea, 23(1), pp. 407-410.
- Kim, D., Kim, O. (2004). Standardization of structural welded-wire-fabric for practical use and analysis of the application results in the pilot project, Journal of the Architectural Institute of Korea Structure & Construction, 20(3), pp. 113-120.
- Kim, I. H., Lee, S. J. ( 2005). Development of an interoperability model for different construction drawing standards based on ISO 10303 STEP, Autom. Constr., 14, pp 633-649. https://doi.org/10.1016/j.autcon.2005.01.003
- Kim, T. G. (2005). An Indexing Technique using BitmapInvert Method based on Relative Position Coordinates for Search and Update Operations on XML and MPEG-7 documents, Doctors Thesis Kwangwoon University.
- Kim, Y. (2019). A study on the Automatic system of Standardized Rebar Shop Drawing, Master thesis Yeungnam University.
- Lee, G. (2014). Preparation of Rebar Shop Drawing Based on BIM and Rebar Work Management Process Application, Master thesis Sun Moon University.
- Lee, J. H. (2011). A study on the establishment of integrated structural model in RC structures for the automatic reinforcement placement system based on structural building information modeling, Masters Thesis Hanyang University, pp. 46-48.
- Lee, S. (2013). Modelling for Estimation of RC Structural Material by BIM, Master thesis Hoseo University.
- Mckinsey global institute (2017). Reinventing construction: A route to higher productivity.
- Nawari, N. O. (2012). BIM standard in off-site construction. Journal of Architectural Engineering, 18(2), pp. 107-113. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000056
- Park, J. (2020). A Development on BIM/Deep Learning based Building Object Detecting Technology for Improving Building Supervision Efficiency, Master thesis Kyungpook National University.
- Seo, H. S. (2014). A Study on the Application of Rebar Quantity Estimation and Placing Drawing with 3D Modeling, Seoul National University of Science & Technology.
- Seong J. (2012). Design and Development of BIM Based Rebar Shop Drawing System for Column and Wall, Master thesis Daejeon University.
- Smith, Ryan E. (2016). Off-site and modular construction explained, Off-Site Construction Council, National Institute of Building Sciences.
- Son, J., U, Lee, J. S. (2019). Off Site Construction, Journal of the Construction engineering and management of Korea, 20(5), pp. 3-7.
- Yoo, B. Y. (2010). BIM based design system for PSC girder bridges, Masters Thesis Sungkyunkwan University, pp. 67-70.
- Yoon, Y. H. (1994). A Study on the Establishment of Standard Specification for Structural Welded Wire Fabric, Magazine and journal of krean society of steel construction, 6(3), pp. 145-155.