Computers and Concrete

  • 제27권5호
  • /
  • Pages.407-416
  • /
  • 2021
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Stress checklist of box girder structure based on spatial grid analysis method

  • Ni, Ying-sheng (Research Institute of Highway Ministry of Transport) ;
  • Li, Ming (China-Road Transportation Verification & Inspection Hi-Tech Co., Ltd.) ;
  • Xu, Dong (Department of Bridge Engineering, Tongji Univ.)
  • 투고 : 2020.04.13
  • 심사 : 2021.03.22
  • 발행 : 2021.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

The checking stresses in the Chinese codes for reinforced concrete (RC) or prestressed concrete (PC) bridges are aimed for the thin-web beam, which cannot reflect the actual behavior of the modern structures. The incompleteness of the checking stresses could give rise to the deficiency in the design and calculation, and unable to reveal the reason of some common cracks in the structure. In this paper, the complete stress checklist for RC or PC girder bridges are listed, as well as the corresponding crack shapes. The expression of the complete checking stresses is proposed in details. Spatial Grid Model can reflect all the concerned stresses in the structure. Through the comparison of the calculation results from the spatial grid model and the solid model, it is seen that the spatial grid model can reflect load effects such as shear lag effect, thin-wall effect and local effect. The stresses obtained from the spatial grid model could help engineers to have a good understanding of the structural behavior. Meanwhile, the stress checklist provides the information for analyzing and solving the deficiency in the structure.

키워드

과제정보

This research was conducted at Tongji University. The writers are grateful for funding provided by Project supported by the National Natural Science Foundation of China (Project name: The shear mechanism research of grid reinforced concrete structure, Grant No. 51178335). The writers also express their sincere appreciation to reviewers of this paper for their constructive comments and suggestions. The findings, opinions, and conclusions expressed in the paper are the writers', and do not necessarily reflect the opinions of those acknowledged here.

참고문헌

  1. Chao, L. and Xu, D. (2010), "Space frame lattice model for stress analysis of bridge", Baltic J. Road Bridge Eng., 5(2), 98-103. https://doi.org/10.3846/bjrbe.2010.14.
  2. Chao, L. and Xu, D. (2012), "Influence of cracking on deflections of concrete box girder bridges", Baltic J. Road Bridge Eng., 7(2), 104-111. https://doi.org/10.3846/bjrbe.2012.15.
  3. Chen, Y., Dong, J. and Xu, T. (2018), "Composite box girder with corrugated steel webs and trusses - a new type of bridge structure", Eng. Struct., 166, 354-362. https://doi.org/10.1016/j.engstruct.2018.03.047.
  4. Correia Lopes, G., Couto, C., Vila Real, P. and Lopes, N. (2017), "Elastic critical moment of beams with sinusoidally corrugated webs", J. Constr. Steel Res., 129, 185-194. https://doi.org/10.1016/j.jcsr.2016.11.005.
  5. Elkawas, A.A., Hassanein, M.F. and Elchalakani, M. (2018), "Lateral-torsional buckling strength and behaviour of high-strength steel corrugated web girders for bridge construction", Thin Wall. Struct., 122, 112-123. https://doi.org/10.1016/j.tws.2017.10.021.
  6. Gajdzicki, M., Perlinski, W. and Michalak, B. (2018), "Stability analysis of bi-directionally corrugated steel plates with orthotropic plate model", Eng. Struct., 160, 519-534. https://doi.org/10.1016/j.engstruct.2018.01.057.
  7. Ko, H.J., Moon, J., Shin, Y.W. and Lee, H.E. (2013), "Non-linear analyses model for composite box-girders with corrugated steel webs under torsion", Steel Compos. Struct., 14(5), 409-429. https://doi.org/10.12989/scs.2013.14.5.409.
  8. Li, G.Q. and Wang, W.Y. (2013), "A simplified approach for fire-resistance design of steel-concrete composite beams", Steel Compos. Struct., 14(3), 295-312. https://doi.org/10.12989/scs.2013.14.3.295.
  9. Ma, Y., Ni, Y.S., Xu, D. and Li, J.K. (2017), "Space grid analysis method in modelling shear lag of cable-stayed bridge with corrugated steel webs", Steel Compos. Struct., 24(5), 549-559. https://doi.org/10.12989/scs.2017.24.5.549.
  10. Xu, D. and Yu, Z. (2012), "Application of spatial grid model in structural analysis of concrete box girder bridges", Proc. 18th Cong. IABSE, Int. Assoc. Bridge Struct. Eng., Korea, Seoul, September.
  11. Xu, D., Lei, J. and Turmo Coderque, J. (2017), "Simulating composite bridges with corrugated steel webs using spatial grid model", Iabse Symposium Report.
  12. Xu, D., Ni, Y. and Zhao, Y. (2015), "Analysis of corrugated steel web beam bridges using spatial grid modelling", Steel Compos. Struct., 18(4), 853-871. https://doi.org/10.12989/scs.2015.18.4.853.
  13. Zhao, H., Gou, H.Y., Ni, Y.S. and Xu. D. (2019), "Reinforcement design of the top and bottom slabs of composite box girder with corrugated steel webs", Steel Compos. Struct., 33(4), 537-550. https://doi.org/10.12989/scs.2019.33.4.537.