Journal of the Korea Institute of Information and Communication Engineering (한국정보통신학회논문지)

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Implementation of Zigbee-CoAP-based Standby Power Saving System

Zigbee-CoAP 기반 대기전력 절감 시스템 설계 및 구현

  • Received : 2020.02.28
  • Accepted : 2020.03.29
  • Published : 2020.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, as the interest in power saving increases with the development of IoT technology, research on power saving of smart devices, which are being miniaturized, is being actively conducted. In particular, due to the diversification of IoT-based smart devices and the increase in personal penetration rate, the issue of standby power even when not in use is increasing. However, there is a drawback of physically unplugging the outlet or turning off the power in order to substantially reduce standby power. Since Zigbee is used instead of the existing IP, it is necessary to change to the IoT standard protocol based on the Internet network. Therefore, this paper designed and implemented the standby power saving system applying CoAP, the IoT standard protocol, to the existing Zigbee technology. Existing systems and evaluations confirmed that the average standby power of about 8.4Wh was reduced.

최근 IoT 기술의 발전과 함께 전력 절감에 대한 관심이 증가하면서 소형화되고 있는 스마트 디바이스들의 전력 절감에 대한 연구가 활발히 진행되고 있다. 특히 IoT 기반 스마트 디바이스들의 다양화와 개인 보급률의 증가로 인해 사용하지 않는 동안에도 발생하는 대기전력에 대한 이슈도 증가하고 있다. 그러나 실질적으로 대기전력을 절감하기 위해서는 물리적으로 콘센트를 뽑거나, 전원을 Off 해야 한다는 단점이 있으며, 기존 IP 기반이 아닌 Zigbee를 활용하기 때문에 인터넷 네트워크를 기반으로 하는 IoT 표준 프로토콜로 변경할 필요가 있다. 따라서 본 논문에서는 기존 Zigbee 기술에 IoT 표준 프로토콜인 CoAP을 적용한 대기전력 절감 시스템을 설계 및 구현하였다. 기존 시스템과 평가 결과 평균 약 8.4Wh의 대기전력이 절감된 것을 확인하였다.

Keywords

References

  1. M. H. Park, Y. H. Kim, and S. B. Lee, "A Study on the Development of Evergy IoT Platform," Journal of Korea Information Processing Society, vol. 5, no. 10, pp. 311-318, Oct. 2016.
  2. Korea Energy Agency, "Knowledge Energy," Korea Energy Agency, Apr. 2019.
  3. H. I. Park, S. Y. Kim, S. C. Kang, H. J. Park, I. Y. Kim, and J. S. Choi, "Implementation and Analysis of CoAP-Based Lightweight OpenADR2.0b Protocol for Smart Energy IoT Environment," Journal of Korean Institute of Communications and Information Sciences, vol. 42, no. 4, Apr. 2017.
  4. J. Y. Kang, C. S. Jung, J. H. Seo, Y. T. Yoon, and K. J. Han, "A Multi-band Wearable Device System Supporing LowEnergy Protocol," in Proceedings of the Korean Society of Computer Information Conference, South Korea, pp. 110-113, 2017.
  5. M. Y. Kim, and J. I. Kang, "Standby Power Reducing Method of Wireless Power Supply System Requiring Standby Mode," in Proceedings of the Korean Institute of Power Electronics, South Korea, pp. 136-138, 2019.
  6. H. S. Kim, B. J. Park, and Y. J. Cho, "Smart Outlet System for Single-person Household based on IoT(Internet of Things)," Journal of Digital Contents Society, vol. 18, no. 5, pp. 895-904, Aug. 2017. https://doi.org/10.9728/dcs.2017.18.5.895
  7. S. M. Chun, H. S. Kim, C. G. Ham, Y. S. Chung, and J. T. Park, "Reliable Mobility Management Using CoAP in Internet of Things Environments," Journal of the Institute of Electronics and Information Engineers, vol. 53, no. 8, pp. 13-18, Aug. 2016. https://doi.org/10.5573/ieie.2016.53.8.013
  8. C. M. Kim, H. W. Kang, J. I. Kim, and S. J. Koh, "An Implementation of the Low Power Device Communication using CoAP Protocol in Internet of Things Environment," in Proceedings of Symposium of the Korean Institute of Communications and Information Sciences, South Korea, pp. 102-103, 2015.
  9. M. H. Lee, and J. C. Lee, "Decreasing Transmission Power with Provisioning Quality of Experience in Mobile Communication Networks," Journal of the Korea Institute of Information and Communication Engineering, vol. 20, no. 12, pp. 2219-2225, Dec. 2016. https://doi.org/10.6109/jkiice.2016.20.12.2219
  10. J. J. Lee, K. T. Kim, and H. Y. Youn, "Dynamic Retransmission Scheme Using Retry Count in Constrained Application Protocol (CoAP)," in Proceedings of the Korean Society of Computer Information Conference, South Korea, pp. 243-246, 2015.
  11. C. Y. Lim, H. W. Kim, and Y. H. Kim, "Implementation of the Power Control System Using Optimal Control Method of Multi Power Measurement Module Based on Internet of Things Environments," in Proceedings of the Korean Society for Precision Engineering, South Korea, pp. 222-222, 2015.
  12. S. M. Chun, C. G. Ham, and J. T. Park, "Design and Implementation of Mobility Management Architecture for Internet of Things using CoAP," Journal of the Institute of Electronics and Information Engineers, vol. 54, no. 11, pp. 14-22, Nov. 2017. https://doi.org/10.5573/ieie.2017.54.11.14
  13. S. J. Lee, J. H. Choi, C. S. Seo, B. K. Park, and B. Y. Choi, "Implementation of Smart Shoes for Dementia Patients using Embedded Board and Low Power Wide Area Technology," Journal of the Korea Institute of Information and Communication Engineering, vol. 24, no. 1, pp. 100-106, Jan. 2020.
  14. S. H. Han, H. B. Shim, Y. G. Kim, and J. G. Lim, "Power Control System for Energy Savings," in Proceedings of Symposium of the Korean Institute of Communications and Information Sciences, South Korea, pp. 848-849, 2013.
  15. G. H. Bok, J. H. Byun, S. H. An, J. W. Park, and K. S. Chung, "Smart Home System for IoT-based Power Control," in Proceedings of Symposium of the Korean Institute of Communications and Information Sciences, South Korea, pp. 486-487, 2015.