Acknowledgement
Grant : Development of SiC Automotive OBC Power Module with Environment-Friendly High-Temperature Bonding Materials
Supported by : Ministry of Trade, Industry & Energy (MOTIE), National Research Foundation of Korea (NRF)
References
- Leen, G., Heffernan, D. : Expanding automotive electronic systems. Computer 35, 88-93 (2002) https://doi.org/10.1109/2.976923
- Han, C., Liu, Q., Ivey, D.G. : Electrochemical composite deposition of Sn-Ag-Cu alloys. Mater. Sci. Eng., B 164, 172-179 (2009) https://doi.org/10.1016/j.mseb.2009.09.012
- Official Journal of the European Union, Commission Directive 2011/37/EU amending Annex II to Directive 2000/53/EC on end-of-life vehicles (ELVDirective). http://eur-lex.europaeu/LexUriServ/LexUriServ.do?uri=OJ:L:2011:085:0003:0007:EN:PDF (2011)
- European Parliament, Council of the European Union, Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of life vehicles. https://eur-lex.europaeu/legal-content/EN/ALL/?uri=CELEX:32000L0053 (2000)
- Meola, C. : Pb-Free Electronics Research Manhattan Project, Phase I. ACI Technology Inc, Philadelphia (2009)
- Chang, H., Cehn, H., Li, M., Wang, L., Fu, Y. : Generation of Tin(II) oxide crystals on lead-free solder joints in deionized water. J. Electron. Mater. 38, 2170-2178 (2009) https://doi.org/10.1007/s11664-009-0868-2
- Rosalbino, F., Angelini, E., Zanicchi, G., Carilini, R., Marazza, R. : Electrochemical corrosion study of Sn-3Ag-3Cu solder alloy in NaCl solution. Electrochim. Acta 54, 7231-7235 (2009) https://doi.org/10.1016/j.electacta.2009.07.030
- Wang, M., Wang, J., Ke, W. : Corrosion behavior of Sn-3.0Ag-0.5Cu lead-free solder joints. Microelectron. Reliab. 73, 69-75 (2017) https://doi.org/10.1016/j.microrel.2017.04.017
- Yokoyama, K., Tsuji, D., Sakai, J. : Fracture of sustained tensile-loaded Sn-3.0Ag-0.5Cu solder alloy in NaCl solution. Corros. Sci. 53, 3331-3336 (2011) https://doi.org/10.1016/j.corsci.2011.06.010
- Wang, M., Wang, J., Feng, H., Ke, W. : In-situ observation of fracture behavior of Sn-3.0Ag-0.5Cu lead-free solder during three-point bending tests in ESEM. Mater. Sci. Eng., A 558, 649-655 (2012) https://doi.org/10.1016/j.msea.2012.08.069
- Rosalbino, F., Angelini, E. : Corrosion behaviour assessment of lead-free Sn-Ag-M (M = In, Bi, Cu) solder alloys. Mater. Chem. Phys. 109, 386-391 (2008) https://doi.org/10.1016/j.matchemphys.2007.12.006
- Bang, J.H., Yu, D.Y., Ko, Y.H., Yoon, J.W., Lee, C.W. : Lead-free solder for automotive electronics and reliability evaluation of solder joint. J. Weld. Join. 34(1), 26-34 (2016). (in Korean) https://doi.org/10.5781/JWJ.2016.34.1.26
- Ko, Y.H., Yoo, S.Y., Lee, C.W. : Evaluation on reliability of high temperature lead-free solder for automotive electronics. J. Microelectron. Packag. Soc. 17(4), 35-40 (2010). (in Korean)
- Hong, W.S., Oh, C.M. : Degradation behavior of solder joint and implementation technology for lead-free automotive electronics. J. Weld. Join. 31(3), 22-30 (2013). (in Korean) https://doi.org/10.5781/KWJS.2013.31.3.22
- Park, J.Y., Kim, M.S., Oh, C.M., Do, S.H., Seo, J.D., Kim, D.K., Hong, W.S. : Solder joint fatigue life of flexible impact sensor module for automotive electronics. Korean J. Met. Mater. 55(4), 232-239 (2017). (in Korean) https://doi.org/10.3365/KJMM.2017.55.4.232
- Pandher, R., Lawlor, T. : Effect of silver in common lead-free alloys. In: Proceedings of international conference on soldering and reliability, p. 86. Surface Mount Technology Association (SMTA), Toronto (2009)
- Ochoa, F., Williams, J.J., Chawla, N. : Effects of cooling rate on the microstructure and tensile behavior of a Sn-3.5wt.%Ag solder. J. Electron. Mater. 32(12), 1414-1420 (2003) https://doi.org/10.1007/s11664-003-0109-z
- Li, D., Conway, P.P., Liu, C. : Corrosion characterization of tin-lead and lead free solders in 3.5 wt% NaCl solution. Corros. Sci. 50, 995-1004 (2008) https://doi.org/10.1016/j.corsci.2007.11.025
- Cho, S., Yu, J., Kang, S.K., Shin, D.Y. : Oxidation study of pure tin and its alloys via electrochemical reduction analysis. J. Electron. Mater. 34(5), 635-642 (2005) https://doi.org/10.1007/s11664-005-0077-6
- Zhao, J., Miyashita, Y., Mutoh, Y. : Fatigue crack growth behavior of 96.5Sn-3.5Ag lead-free solder. Int. J. Fatigue 23, 723-731 (2001) https://doi.org/10.1016/S0142-1123(01)00034-2
- Ding, Y., Wang, C., Li, M., Bang, H.S. : In-situ SEM observation on fracture behaviors of Sn-based solder alloys. J. Mater. Sci. 40, 1993-2001 (2005) https://doi.org/10.1007/s10853-005-1222-6
- Park, Y., Bang, J.H., Oh, C.M., Hong, W.S., Kang, N. : The effect of eutectic structure on the creep properties of Sn-3.0Ag-0.5Cu and Sn-8.0Sb-3.0Ag solders. Metals 7(12), 540 (2017) https://doi.org/10.3390/met7120540
Cited by
- Pressure-Assisted Sinter-Bonding Characteristics at 250 °C in Air Using Bimodal Ag-Coated Cu Particles vol.16, pp.3, 2018, https://doi.org/10.1007/s13391-020-00208-1