Computers and Concrete

  • 제21권5호
  • /
  • Pages.513-523
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Prediction of creep in concrete using genetic programming hybridized with ANN

  • Hodhod, Osama A. (Department of Structural Engineering, Faculty of Engineering, Cairo University) ;
  • Said, Tamer E. (Engineering Division, National Research Centre) ;
  • Ataya, Abdulaziz M.
  • 투고 : 2017.06.16
  • 심사 : 2018.01.11
  • 발행 : 2018.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Time dependent strain due to creep is a significant factor in structural design. Multi-gene genetic programming (MGGP) and artificial neural network (ANN) are used to develop two models for prediction of creep compliance in concrete. The first model was developed by MGGP technique and the second model by hybridized MGGP-ANN. In the MGGP-ANN, the ANN is working in parallel with MGGP to predict errors in MGGP model. A total of 187 experimental data sets that contain 4242 data points are filtered from the NU-ITI database. These data are used in developing the MGGP and MGGP-ANN models. These models contain six input variables which are: average compressive strength at 28 days, relative humidity, volume to surface ratio, cement type, age at start of loading and age at the creep measurement. Practical equation based on MGGP was developed. A parametric study carried out with a group of hypothetical data generated among the range of data used to check the generalization ability of MGGP and MGGP-ANN models. To confirm validity of MGGP and MGGP-ANN models; two creep prediction code models (ACI209 and CEB), two empirical models (B3 and GL 2000) are used to compare their results with NU-ITI database.

키워드

참고문헌

  1. Abdollahzadeh, G., Jahani, E. and Kashir, Z. (2016), "Predicting of compressive strength of recycled aggregate concrete by genetic programming", Comput. Concrete, 18(2), 155-163. https://doi.org/10.12989/cac.2016.18.2.155
  2. Abed, M. and Osman, S. (2013), "Dynamic versus static artificial neural network model for masonry creep deformation", Proceedings of the Institution of Civil Engineers Structures and Buildings, 355-366.
  3. Abed, M., El-Shafie, A. and Osman, S. (2010), "Creep predicting model in masonry structure utilizing dynamic neural network", J. Comput. Sci., 6(5), 597-605. https://doi.org/10.3844/jcssp.2010.597.605
  4. ACI-Committee209 (2008), Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete (ACI 209.2R-08), American Concrete Institute, Farmington Hills, MI.
  5. Ao, S., Castillo, O. and Hang, X. (2011), Intelligent Control and Computer Engineering, Springer Netherlands.
  6. Bal, L. and Buyle-bodin, F. (2014), "Artificial neural network for predicting creep of concrete", Neur. Comput. Appl., 25(6), 1359-1367. https://doi.org/10.1007/s00521-014-1623-z
  7. Bazant, Z.P. (1982), Mathematical Models for Creep and Shrinkage of Concrete, Creep and Shrink age in Concrete Structures, Wittmann, John Wiley & Sons Ltd.
  8. Bazant, Z.P. and Baweja, S. (2000), "Creep and shrinkage prediction model for analysis and design of concrete structures: model B3", The Adam Neville Symposium: Creep and Shrinkage-Structural Design Effects, SP-194, Ed. A. Al-Manaseer, American Concrete Institute, Farmington Hills, MI.
  9. Bazant, Z.P. and Li, G.H. (2008), "Comprehensive database on concrete creep and shrinkage", Aci. Mater. J., 105(6), 635-637.
  10. Bazant, Z.P. and Panula, L. (1978), "Practical prediction of time dependent deformations of concrete", Mater. Struct., 11(5), 307-316.
  11. Branson, D.E. and Christiason, M.L. (1971), "Time-dependent concrete properties related to design-strength and elastic properties, creep, and shrinkage designing for effects of creep, shrinkage, and temperature in concrete structures", SP-27, American Concrete Institute, 257-277.
  12. CEB (1999), Structural Concrete-Textbook on Behaviour, Design and Performance, Updated Knowledge of the CEB/FIP Model Code 1990, fib Bulletin2, Federation Internationale du Beton, Lausanne, Switzerland, 2, 37-52.
  13. Cladera, A., Perez-Ordonez, J.L. and Martinez-Abella, F. (2014), "Shear strength of RC beams. Precision, accuracy, safety and simplicity using genetic programming", Comput. Concrete, 14(4), 479-501. https://doi.org/10.12989/cac.2014.14.4.479
  14. Fanourakis, G.C. and Ballim, Y. (2003), "Predicting creep deformation of concrete: a comparison of results from different investigations", Proceedings of the 11th FIG Symposium on Deformation Measurements, Santorini, Greece.
  15. Fulcher, J. and Lakhmi, C.J. (2008), Computational Intelligence: A Compendium, Springer-Verlag Berlin Heidelberg.
  16. Gandomi, A.H., Sajedi, S., Kiani, B. and Huang, Q.D. (2016), "Genetic programming for experimental big data mining: A case study on concrete creep formulation", Auto. Constr., 70, 89-97. https://doi.org/10.1016/j.autcon.2016.06.010
  17. Gardner, N.J. (2004), "Comparison of prediction provisions for drying shrinkage and creep of normal-strength concretes", Can. J. Civil Eng., 31(5), 767-775. https://doi.org/10.1139/l04-046
  18. Golafshani, E.M., Rahai, A. and Kebria, S.S.H. (2014), "Prediction of the bond strength of ribbed steel bars in concrete based on genetic programming", Comput. Concrete, 14(3), 327-345. https://doi.org/10.12989/cac.2014.14.3.327
  19. Hakin, S. (1999), NEURAL NETWORKS A Comprehensive Foundation, Prentice Hall International, Inc.
  20. Holland, J. (1992), Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications to Biology, Control and Artificial Intelligence, MIT Press, Cambridge, MA.
  21. Karthikeyan, J., Upadhyay, A. and Bhandari, N.M. (2008), "Artificial neural network for prediction creep and shrinkage of high performance concrete", J. Adv. Concrete Technol., 6(1), 135-142. https://doi.org/10.3151/jact.6.135
  22. Klovanych, S. (2015), "Creep of concrete at variable stresses and heating", Comput. Concrete, 16(6), 897-907. https://doi.org/10.12989/cac.2015.16.6.897
  23. Lozano-Galant, J.A. and Turmo, J. (2014), "Creep and shrinkage effects in service stresses of concrete cable-stayed bridges", Comput. Concrete, 13(4), 483-499. https://doi.org/10.12989/cac.2014.13.4.483
  24. MathWorks (2015), "Matlab-help", http://www.mathworks.com/help/nnet/ug/choose-neuralnetwork-input-outputprocessing-functions.html.
  25. Muduli, P.K. and Das, S.K. (2013), "CPT-based seismic liquefaction potential evaluation using multi-gene genetic programming approach", Indi. Geotech. J., 44(1), 86-93. https://doi.org/10.1007/s40098-013-0048-4
  26. Negnevitsky, M. (2005), Artificial Intelligence A Guide to Intelligent Systems, Addison-Wesley.
  27. Searson, D. (2014), "GPTIPS symbolic data mining platform for MATLAB", https://sites.google.com/site/gptips4matlab/7.
  28. Searson, D.P. (2009), GPTIPS: Genetic Programming & Symbolic Regression for MATLAB, User Guide.
  29. Searson, D.P., Leahy, D.E. and Willis, M.J. (2010), "GPTIPS: An open source genetic programming toolbox for multigene symbolic regression", Proceedings of the International Multi Conference of Engineers and Computer Scientists, 1, Citeseer.
  30. Shahin, M.A., Jaska, M.B. and Maier, H.R. (2003), "Application of artificial neural networks in foundation engineering", Australian Geomechanics.
  31. Shukla, A., Tiwari, R. and Kala, R. (2010), Towards Hybrid and Adaptive Computing, Springer-Verlag Berlin Heidelberg.
  32. Taha, M.M.R., Noureldin, A., Ei-Sheimy, N. and Shrive, N.G. (2003), "Artificial neural networks for predicting creep with an example application to structural masonry", Can. J. Civil Eng., 30(3), 523-532. https://doi.org/10.1139/l03-003
  33. Taylor, B.J. (2006), Methods and Procedures for the Verification and Validation of Artificial Neural Networks, Springer US.

피인용 문헌

  1. Prediction model for concrete carbonation depth using gene expression programming vol.26, pp.6, 2018, https://doi.org/10.12989/cac.2020.26.6.497
  2. Strength and strain modeling of CFRP -confined concrete cylinders using ANNs vol.27, pp.3, 2018, https://doi.org/10.12989/cac.2021.27.3.225
  3. A new formulation for strength characteristics of steel slag aggregate concrete using an artificial intelligence-based approach vol.27, pp.4, 2018, https://doi.org/10.12989/cac.2021.27.4.333