한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권2호
  • /
  • Pages.153-159
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

3.5톤 상용차용 구동축 개발에 관한 연구

A Study on the Development of the Driveshaft for a 3.5-Ton Commercial Vehicle

  • Sim, Ki-Joong (Kunsan Advanced Technology Innovation Center, Kunsan National UNIV.) ;
  • Moon, Hong-Ju (Kunsan Advanced Technology Innovation Center, Kunsan National UNIV.) ;
  • Jeon, Namjin (The Institute of Technology, Hwa Shin Co)
  • 투고 : 2018.01.14
  • 심사 : 2018.03.17
  • 발행 : 2018.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper suggests a way to improve the strength of the driveshaft, which is a vulnerable part of the drive axle system, for a 3.5-ton commercial vehicle. The driveshaft is composed of a universal joint with a spider and yoke, yoke shaft, etc. The driveshaft is developed by choosing design parameters for the spider and yoke such as the diameter and distance through the structural analysis of the driveshaft's components. Some driveshaft design cases have been made and analyzed with ANSYS; the strength of the driveshaft parts are validated from these results to propose an optimal design case. Finally, we suggest a driveshaft system that satisfies the working conditions for a 3.5-ton commercial vehicle.

키워드

참고문헌

  1. Guk, D. S., Ahn, D. G., Lee, H. J. and Jung, J. H., "Investigation of Structural Safety of Monobloc Tubular Drive Shaft Subjected to Torque", Journal of the KSPE, Vol. 32, No. 12, pp. 1073-1080, 2015. https://doi.org/10.7736/KSPE.2015.32.12.1073
  2. Lee, H. J., Kang, M., Lee, B., Sug, G. and Kim, J., "Bottom Pot Hole Shape Improvement and Structural Analysis of a Universal Joint Yoke for a Propeller Shaft", KSAE Spring Conference Proceedings, pp.1-9, 2010.
  3. Song, H. S., Jung, D., Seo, Y. K. and Jung, W. S., "Durability Assessment and Design Modification of a Propeller Shaft of an Automotive", KSAE Spring Conference Proceedings, pp. 826-849, 2011.
  4. Han, D. S., Lee, S. H. and Han, G. J., "Strength evaluation of a propeller shaft according to the cross angle", KSPE, pp. 237-238, 2008.
  5. Avrigean, E., Pascu, A. M., and Oleksik, V. S., "Study of the Cardan Cross Using the Experimental and Analytical Method" Proceeding Engineering, Vol. 100, pp. 499-504, 2015. https://doi.org/10.1016/j.proeng.2015.01.396
  6. Oh, B. G., "Strength Analysis of Cross Groove Type Constant Velocity Joint Cage for Propeller Shaft", Transactions of KSAE, Vol. 16, No. 2, pp. 74-79, 2008.
  7. Kweon, S. S., Seo, K. W. and An, H. S., "Improve ment of NVH Performance for Premium Passenger Car Propeller Shaft", KSAE Annual Conference Proceedings, pp. 1345-1339, 2010.
  8. Choi, E. O., Ahn, B. M., Hong, D. P. and Chung, T. J., "A Study on the Design of Propeller Shaft for Reduction of Torsional Vibration ", Transactions of KSAE, Vol. 7, No. 7, pp. 221-228, 1999.
  9. Kweon, E. S., Lee, C. W., Shin, I. Y. and Yi, C. S., "A Study on the Vibration Analysis of Impeller and Shaft in Cryogenic Submerged Pumo", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 56-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.2.056
  10. Cho, J. H., Moon, D. J and Lee. J. SC., "A Study on the CAE analysis of Bed Multi-Tasking Machine for Automotive Power Train Shafts", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 9-14, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.009

피인용 문헌

  1. Development of CFRP Tubes for the Light-Weight Propeller Shaft of 4WD SUV Vehicles vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.032
  2. Heat Generation and Machining Accuracy According to Material for Ultra-Precision Machining vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.130