DOI QR코드

DOI QR Code

Design and Implementation of Non-contact IoT Ringer Replacement Automatic Notification System

비접촉 IoT 링거 교체 자동 알림 시스템 설계 및 구현

  • 이효승 (순천대학교 컴퓨터공학과) ;
  • 오재철 (순천대학교 컴퓨터공학과)
  • Received : 2018.10.13
  • Accepted : 2018.12.15
  • Published : 2018.12.31

Abstract

The Ringer's Solution used in medical institutions is one of the injections helpful for recovering the body condition from fever or dehydration by supplying the water to the body. The medical staffs frequently check the amount of Ringer's Solution prescribed for the relevant patient to check the time for replacing the Ringer's Solution. However, currently, many nurses experience the excessive workload because of the insufficient workforce and lots of workload assigned to each of the nurses; so the they cannot provide the high-quality medical services to patients and guardians. In order to solve this problem, this thesis designed and realized the Ringer's Solution replacement time control system through the non-contacting sensor, IoT device using WiFi, and OCS interlock. Thus, this study is expected to be able to efficiently operate the Ringer's Solution replacement work and also to provide the high-quality medical service to patients and guardians by automatically notifying the timing of Ringer's Solution replacement to medical staffs, and omitting the inefficient intermediate step in the past.

의료기관에서 사용하는 링거는 몸에 수분을 공급하여 열이나 탈수 상태에 있던 몸의 상태를 회복시켜 주는데 도움을 주는 주사제 중 하나로 의료진이 해당 환자에게 처방된 링거의 양을 수시로 점검하여 링거의 교체 시기를 확인하여야 한다. 하지만 현재 간호사 인력은 매우 부족하고 부여된 업무량도 적지 않아 업무에 부하가 발생하게 되고 이로 인하여 환자 및 보호자에게 양질의 의료서비스를 제공하지 못하게 된다는 문제점이 발생하게 된다. 이러한 문제점을 해결하기 위해 본 논문에서는 비접촉식 센서와 WiFi통신방식을 이용한 IoT 디바이스와 OCS 연동을 통한 링거 교체 시기 관제 시스템을 설계하고 구현함으로써 의료진에게 해당 환자의 링거 자동 교체 타이밍을 알려 과거 비효율적이던 중간 단계를 생략함으로써 링거 교체 업무를 효율적으로 운영하고 환자 및 보호자에게 양질의 의료서비스를 제공할 수 있기를 기대한다.

Keywords

KCTSAD_2018_v13n6_1405_f0001.png 이미지

그림 1. 로드셀 및 링거 병 Fig. 1 Loadcell and a ringer bottle

KCTSAD_2018_v13n6_1405_f0002.png 이미지

그림 2. 영상분석을 통한 연구 Fig. 2 Image analysis study

KCTSAD_2018_v13n6_1405_f0003.png 이미지

그림 3. 낙하시간 분석을 통한 링거 솔루션 연구 Fig. 3 A Study on ringer solution through fall time analysis

KCTSAD_2018_v13n6_1405_f0004.png 이미지

그림 4. 비접촉 IoT 링거 교체 자동 알림 시스템 구성도 Fig. 4 Non-contact IoT ringer replacement automatic notification system configuration diagram

KCTSAD_2018_v13n6_1405_f0005.png 이미지

그림 5. 데이터 저장방식 구성도 Fig. 5 Data storage method configuration diagram

KCTSAD_2018_v13n6_1405_f0006.png 이미지

그림 6. 비접촉 IoT 링거 교체 신호전송 디바이스 회로도 Fig. 6 Non-contact IoT ringer replacement signal transmission device circuit diagram

KCTSAD_2018_v13n6_1405_f0007.png 이미지

그림 7. 비접촉 IoT 링거 교체 신호전송 디바이스 케이스 3D 설계 Fig. 7 Non-contact IoT ringer replacement signal transmission device case 3D design

KCTSAD_2018_v13n6_1405_f0008.png 이미지

그림 8. 비접촉 IoT 링거 교체 신호전송 디바이스 Fig. 8 Non-contact IoT ringer replacement signal transmission device

KCTSAD_2018_v13n6_1405_f0009.png 이미지

그림 9. 비접촉 IoT 디바이스 Fig. 9 Non-contact IoT ringer replacement automatic notification system configuration diagram

References

  1. H. Lee and J. Oh, "Studies on Effective Fluid Monitoring Terminal design with the Use of Location-based service," J. of the Korea Institute of Electronic Communication Sciences, vol. 11 no. 4, 2016, pp. 421-426. https://doi.org/10.13067/JKIECS.2016.11.4.421
  2. J. Jang, "A sensor to ringer's solution of remain," Utility Model Registration no. 20-0297177, Dec. 11, 2002.
  3. K. Ha, J. Kwon, O. D. gelral, and H. Kim, "Develop mentofa Remote Mon ito ring System of the Residual Amount of Ringer's Solution at Hospitals Using a Microprocessor," In Proc. The Korean Institute of Electrical Engineers Conf., Yong-in Korea, Oct. 2005, pp. 279-282.
  4. C. Kim, S. Woo, Z. Din, C. Won, J. Hong, and J. Cho, "An Algorithm for Detecting Residual Quantity of Ringer's Solution for Automatic Replacement," J. of the Korea industrial information systems society, vol. 13, no. 1, 2008, pp. 30-36.
  5. T. L. Floyd, Electronic Devices(9th Edition). London: Pearson Education, 2011.
  6. H. Song, I. Lee, and Y. Lee, "Ringer"s solution detector and transceiver design for efficient manage of patient," J. of Korea Academia-Industrial cooperation Society, vol. 17 no. 9, 2016, pp. 45-50. https://doi.org/10.5762/KAIS.2016.17.9.45
  7. J. Kim, H. Lim, and S. Lee, "Implementation of a reading room management system by using arduino and distance sensing," In Proc. The Institute of Electronics and Information Engineers Summer General Conf., Jeju, Korea, 2014, pp. 298-300.
  8. H. Park, Y. Ko, S. Lee, J. Jang, and B. Lee, "Walking Assistance System for Visually Impaired People using Vultiple sensors," J. of the Korea Institute of Electronic Communication Sciences, vol. 12, no. 4, 2017, pp. 533-538. https://doi.org/10.13067/JKIECS.2017.12.4.533
  9. G. Lee, H. Kim, Y. Jeong, H. No, and Y. Pakr, "Plant Cultivation System Using the IoT," J. of the Korea Institute of Electronic Communication Sciences, vol. 12, no. 4, 2017, pp. 657-666. https://doi.org/10.13067/JKIECS.2017.12.4.657
  10. Y. Bae, J. Kang, J. Park, B. Kim, and B. Lee, "Improving Safety of Biycle Driver System using Arduino," J. of the Korea Institute of Electronic Communication Sciences, vol. 12, no. 4, 2017, pp. 525-532. https://doi.org/10.13067/JKIECS.2017.12.4.525
  11. D. Yoon, K. Lee, S. Han, Y. Kim, and S. Lee, "A Study on Flight Stabilization of Drones by Gyro Sensor and PID Control," J. of the Korea Institute of Electronic Communication Sciences, vol. 12, no. 4, 2017, pp. 591-598. https://doi.org/10.13067/JKIECS.2017.12.4.591