Signal Processing of the Continuous-Wave Radar for Approach and Retreat of Targets Using I and Q Channels

I/Q 채널을 이용한 연속파 레이다의 표적 접근/후퇴 신호처리

  • 조춘식 (한국항공대학교 항공전자정보공학부 고주파회로연구실)
  • Received : 2017.01.13
  • Accepted : 2017.02.24
  • Published : 2017.03.31

Abstract

This letter presents the signal processing of a CW radar (Continuous Wave or Doppler radar) sensor which enables the radar to detect the multiple targets' approaching and retreating using both I and Q channels. The proposed algorithm utilizes the phase change of the Quadrature signal, which occurs when targets move back and forth from the radar. The verification is carried out with the board containing a commercially available MMIC chip and an MCU by analyzing the received data from MMIC. Also the proposed algorithm is downloaded to MCU and the approaching and retreating movement is confirmed. The CW frequency is 24.125 GHz and the transmitter output power used is 7.2 dBm. Detectable distance is about 12 m.

본 논문은 I/Q 채널을 다 이용하여 표적의 후퇴와 접근을 감지하는 연속파 레이다의 신호처리에 대하여 분석한다. 표적이 레이다로부터 접근 혹은 후퇴할 때 Quadrature 신호의 위상이 달라지는 것을 이용하여 물체의 후퇴와 접근을 감지하며, 상용 MMIC칩과 MCU를 이용하여 모듈을 구현하고, MMIC로부터 나온 수신데이터를 분석하여 검증하였다. 또한 사람을 대상으로 접근, 후퇴하는 동작에 대한 신호처리를 MCU를 사용하여 확인하였다. 사용한 주파수는 24.125GHz이며, 송신기 출력전력은 7.2 dBm이다. 실제 구현한 레이다로 최대 검출가능거리는 약 12m를 달성하였다.

Keywords

References

  1. L. Griffiths, "Comparison of quadrature and single-channel receiver processing in adaptive beam forming," IEEE Trans. Antennas. Propag., vol. 25, no. 2, pp. 209-218, Mar. 1977. https://doi.org/10.1109/TAP.1977.1141556
  2. C. Gu and C. Li, "DC coupled CW radar sensor using fine-tuning adaptive feedback loop," Electron. Lett., vol. 48, no. 6, pp. 344-345. Mar. 2012. https://doi.org/10.1049/el.2012.0071
  3. N. Boutin, "Complex Signals," RF Design, Dec. 1989.