DOI QR코드

DOI QR Code

A Study for the Weldability and Welded Joint Performance on the SAW of HSA800 Steel

HSA800 강재의 SAW 용접성 및 이음성능 연구

  • 최영한 (한국기술교육대학교, 건축공학과) ;
  • 김상섭 (한국기술교육대학교, 디자인.건축공학부)
  • Received : 2016.07.17
  • Accepted : 2016.10.24
  • Published : 2017.02.28

Abstract

In this research, 9 SAW welding specimens with 1 hour post-heat treatment (PH1) and 2 hours (PH2) were experimented to confirm the weldability and the joint performance of 60mm thickness HSA800 steel. SAW tests with PH1 & PH2, including weld impact test, bend test, hardness test, macroscopic test, and microscopic test, had a good test results. However, from the chemical composition test results, P composition was not satisfied with Korean Industrial Standards(KS). According to the weld-zone tensile tests, 2 hours post-heat SAW is recommended because the mechanical characteristics of SAW PH2 were better than those of SAW PH1.

본 연구에서는 HSA800 60mm 강재의 SAW 용접성 및 이음성능을 확인하기 위해 후열처리 1시간과 2시간에 대한 SAW 공시체를 제작하여 9종의 시험을 실시하였다. 용접부 충격시험, 굽힘시험, 경도시험, 매크로조직시험, 마이크로조직시험 결과 SAW PH1 및 PH2는 양호한 용접부로 나타났으나, 화학성분시험 결과 P성분이 KS를 만족하지 못하였다. 용접부 평판 및 봉형 인장시험결과 SAW PH1에 비하여 PH2의 기계적 특성이 양호하게 나타났기 때문에 SAW의 경우 후열처리는 2시간을 권장한다.

Keywords

References

  1. 김진원, 이승은, 김진호, 이진우, 정홍철(2014) 인장강도 800MPa급 저항복비 고강도 강재 용접부 성능평가, 한국강구조학회지, 한국강구조학회, 제26권, 제3호, pp.17-22. Kim, J.W., Lee, S.E, Kim, J.H., Lee, J.W., and Jeong, H.C. (2014) Welded Joint Test of the Tensile Strength of 800MPa Grade High Strength Steel with Low Yield Ratio, Magazine of the Korean Society of Steel Construction, KSSC, Vol.26, No.3, pp.17-22 (in Korean).
  2. 김도환, 이승은, 정경수, 김진호(2013) 건축구조용 고성능강재 HSA800의 초고층 적용성 평가, 한국강구조학회지, 한국강구조학회, 제25권, 제3호, pp.47-52. Kim, D.H., Lee, S.E., Chung, K.S., and Kim, J.H. (2013) Super-tall Building Applicaitons of HSA800, the High-performance Steel for Building Structures, Magazine of the Korean Society of Steel Construction, KSSC, Vol.25, No.3, pp.47-52 (in Korean).
  3. 최인락, 정경수, 김도환, 김진호(2014) HSA800 강재 현장적용사례, 한국강구조학회지, 한국강구조학회, 제26권, 제3호, pp.33-39. Choi, I.R., Chung, K.S., Kim, D.H., and Kim, J.H. (2014) Field Application of High-Strength Steel HSA800, Magazine of the Korean Society of Steel Construction, KSSC, Vol.26, No.3, pp.33-39 (in Korean).
  4. KS D 5994(2011) 건축구조용 고성능 압연강재, 기술표준원, 지식경제부. KS D 5994 (2011) High-performance rolled Steel for building structures, Korean Agency for Technology and Standards, Ministry of Knowledge Economy (in Korean).
  5. 이철호, 김대경, 한규홍, 박창희, 김진호, 이승은, 김도환 (2013) HSA800 후판재의 맞댐용접부 인장강도 실험, 한국강구조학회논문집, 한국강구조학회, 제25권, 제4호, pp.431-440. Lee, C.H., Kim, D.K., Han, K.H., Park, C.H., Kim, J.H., Lee, S.E., and Kim, D.H. (2013) Tensile Testing of Groove Welded Joints Joining Thick-HSA800 Plates, Journal of Korean Society of Steel Construction, KSSC, Vol.25, No.4, pp.431-440 (in Korean).
  6. 현대종합금속(2014) 용접재료 HYUNDAI WELDING (2014) Welding consumables (in Korean).
  7. 김종락, 이은택, 최영한, 김상섭(2016) HSA800 강재의 소재특성 및 강도의 균질성에 관한 연구, 한국강구조학회논문집, 한국강구조학회, 제28권, 제3호, pp.173-183. Kim, J.R., Lee, E.T., Choi, Y.H., and Kim, S.S. (2016) A Study on the Material Characteristics of the HSA800 Steel and Homogeneity of Strength, Journal of Korean Society of Steel Construction, KSSC, Vol.28, No.3, pp.173-183 (in Korean).

Cited by

  1. Strength of Undermatching Fillet Welded Longitudinal Joints of High Strength Steel vol.30, pp.6, 2018, https://doi.org/10.7781/kjoss.2018.30.6.347