Abstract
This paper shows a length of wirecutter using an analysis based on Rotorcraft's control input and taxiing speed. In case of selecting an inappropriate length of wirecutter which applies to rotorcraft for safety, this causes a collision between blade and wirecuter, or an accident by wire. We review the control input which was used in development stage, and establish the conditions of control input which are needed in taxiing. Based on these conditions, we review the collision possibility between blade and wirecutter through analysis in case of 20, 40, 60 kts taxiing speed. Following, this result is verified by comparison with that of a simulation test in rotorcarft. Finally, in case of high collision possibility, we presented the downsize length to avoid the collision and increment of non-protective area in flight, simultaneously.
본 논문에서는 회전익 항공기의 조종입력과 지상 활주 속도를 바탕으로 해석을 통하여 전선절단기 길이를 제시하였다. 항공기의 안전을 위해서 적용되는 전선절단기가 적절한 길이로 선정되지 않을 경우 블레이드와 충돌가능성 생기거나 전선에 의해서 사고가 발생할 수 있다. 본 연구를 위해서 개발에서 사용된 조종입력을 분석하여 지상 활주에 필요한 조종입력 조건을 설정하였다. 이를 바탕으로 20, 40, 60 kts 지상 활주 속도별로 해석을 통하여 블레이드와 전선절단기 충돌 가능성을 검토하였다. 이 후, 이 결과를 항공기 모사시험 결과와 비교하여 해석결과의 적절성을 확인하였다. 최종적으로 지상 활주 간 모든 조종입력 범위에 대해 충돌을 피하기 위한 전선절단기 축소 길이와 이 경우 공중비행 시 생기는 비보호구역의 증가량을 동시에 제시하였다.