참고문헌
- Amano, R.S. and Sunden, B., Impingement Jet Cooling in Gas Turbines, WIT Press, Southampton, England, U.K., 2014.
- Han, J., "Turbine Blade Cooling Studies at Texas A&M University: 1980-2004," Journal of Thermophysics and Heat Transfer, Vol. 20, No. 2, pp. 161-187, 2006. https://doi.org/10.2514/1.15403
- Jambunathan, K., Lai, E., Moss, M.A. and Button, B.L., "A Review of Heat Transfer Data for Single Circular Jet Impingement," International Journal of Heat and Mass Transfer, Vol. 13, No. 2, pp. 106-115, 1992.
- Ligrani, P.M., Oliveira, M.M. and Blaskovich, T., "Comparison of Heat Transfer Augmentation Techniques," AIAA Journal, Vol. 41, No. 3, pp. 337-362, 2003. https://doi.org/10.2514/2.1964
- Taslim, M.E. and Bethka, D., "Experimental and Numerical Impingement Heat Transfer in an Airfoil Leading-Edge Cooling Channel with Cross-Flow," ASME Journal of Turbomachinery, Vol. 131, No. 1, pp. 011021-1-7, 2009. https://doi.org/10.1115/1.2950058
- Zhao, Q.Y., Jung, E.Y., Choi, S.M. and Cho, H.H., "Effect of Guide Wall on Jet Impingement Cooling in Blade Leading Edge Channel," Journal of Mechanical Science and Technology, Vol. 30, No. 2, pp. 525-531, 2016. https://doi.org/10.1007/s12206-016-0105-x
- Liu, Z. and Feng, Z., "Numerical Simulation on the Effect of Jet Nozzle Position on Impingement Cooling of Gas Turbine Blade Leading Edge," International Journal of Heat and Mass Transfer, Vol. 54, Issue 23-24, pp. 4949-4959, 2011. https://doi.org/10.1016/j.ijheatmasstransfer.2011.07.008
- Yang, L., Ren, J., Jiang, H. and Ligrani, P., "Experimental and Numerical Investigation of Unsteady Impingement Cooling within a Blade Leading Edge Passage," International Journal of Heat and Mass Transfer, Vol. 71, pp. 57-68, 2014. https://doi.org/10.1016/j.ijheatmasstransfer.2013.12.006
- Facchini, B., Maiuolo, F. and Tarchi, L., "Experimental Investigation on the Heat Transfer of a Leading Edge Cooling System: Effects of Jet-to-Jet Spacing and Showerhead Extraction," Proceedings of ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, San Antonio, Texas, USA, GT2013-94759, June, 2013.
- Jung, E.Y., Park, C.U., Lee, D.H., Kim, K.M., Woo, T. and Cho, H.H., "Heat Transfer Characteristics of an Angled Array Impinging Jet on a Concave Duct," Proceedings of ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, Copenhagen, Denmark, GT2012-69566, June 2012.
- Martin, E.L. and Wright, L.M., "Computational Investigation of Jet Impingement on Turbine Blade Leading Edge Cooling with Engine-Like Temperatures," Proceedings of ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, Copenhagen, Denmark, GT2012-68811, June 2012.
- Zuckerman, N. and Lior, N., "Impingement Heat Transfer : Corrections and Numerical Modeling," ASME Journal of Heat Transfer, Vol. 127, pp. 544-552, May 2005. https://doi.org/10.1115/1.1861921
- Hong, S.K., Lee, D.H. and Cho, H.H., "Heat/Mass Transfer Measurement on Concave Surface in Rotating Jet Impingement," Journal of Mechanical Science and Technology, Vol. 22, No. 10, pp. 1952-1958, 2008. https://doi.org/10.1007/s12206-008-0738-5
- Zhao, Q.Y., Chung, H., Choi, S.M. and Cho, H.H., "Effect of Guide Wall for Jet Impingement Cooling in Blade Leading Edge Channel," The 6th International Symposium on Fluid Machinery and Fluids Engineering (ISFMFE 2014), Wuhan, China, No. 90149, Oct. 2014.
- Taslim, M.E., Bakhtari, K. and Liu, H., "Experimental and Numerical Investigation of Impingement on a Rib-Roughened Leading-Edge Wall," ASME Journal of Turbomachinery, Vol. 125, Issue 4, pp. 682-691, 2003. https://doi.org/10.1115/1.1624848