한국추진공학회지 (Journal of the Korean Society of Propulsion Engineers)

  • 제20권4호
  • /
  • Pages.68-76
  • /
  • 2016
  • /
  • 1226-6027(pISSN)
  • /
  • 2288-4548(eISSN)
한국추진공학회 (The Korean Society of Propulsion Engineers)
권호 표지
DOI QR코드

DOI QR Code

리세스 길이 및 분사압력 변이에 따른 스월 동축형 인젝터의 분무특성

Spray Characteristics of Swirl-coaxial Injector According to the Recess Length and Injection Pressure Variation

  • Bae, Seong Hun (Department of Mechanical Engineering, Pukyong National University) ;
  • Kwon, Oh Chae (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Kim, Jeong Soo (Department of Mechanical Engineering, Pukyong National University)
  • 투고 : 2016.06.15
  • 심사 : 2016.07.14
  • 발행 : 2016.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 이원추진제 추력기의 핵심부품에 대한 성능평가의 일환으로, 기체메탄/액체산소를 추진제로 사용하는 스월 동축형 인젝터의 리세스 길이 및 분사압력에 따른 분무특성 파악을 목표로 하였다. 분무형상은 슐리렌 가시화 기법을 이용하여 획득하였고, 슐리렌장치는 광원, 오목거울, 초고속카메라 등으로 구성된다. 내부 인젝터에 의한 액체 분무의 경우 hollow cone 형상을 확인하였으며, 내부 인젝터 오리피스 길이의 증가와 함께 스월강도 감쇠의 영향으로 분무각은 줄어들었다. 기체-액체를 함께 분사할 때, 분무각은 리세스 길이가 증가함에 따라 외부혼합영역에서 증가하지만, 내부혼합영역에서는 작아졌는데, 액체분무 분사 압력의 높고 낮음에 무관하다는 사실을 확인하였다.

This research is carried out for the performance evaluation of the injector that is one of the critical components of bipropellant-rocket-engine. Spray characteristics are investigated in detail according to the recess length and injection pressure on the swirl-coaxial-injector using gaseous methane and liquid oxygen as propellants. A visualization is conducted by the Schlieren photography that is composed of a light source, concave mirrors, knife, and high-speed-camera. A hollow-cone-shape is identified in the liquid spray that is spread only by inner injector and the spray angle is decreased due to the diminution of swirl strength in accordance with the increase of the length of injector orifice. When the injector sprays the liquid through the inner injector with the aid of gas through the outer injector, the spray angle in external mixing region tends to increase with rise of the recess length, while in internal mixing region, it is decreased. It is also confirmed that the same tendency of the spray angle with recess length appears irrespective of the injection pressure of liquid spray.

키워드

참고문헌

  1. Bae, S.H., Jung, H. and Kim, J.S., "A Preliminary Configuration Design of Methane/Oxygen Bipropellant Small-rocketengine through Theoretical Performance Analysis," Journal of the Korean Society of Propulsion Engineers, Vol. 19, No. 3, pp. 47-53, 2015. https://doi.org/10.6108/KSPE.2015.19.3.047
  2. Bostwick, C., Gibbs, T. and Anusha, P., "LOX/Methane Engine Utilizing Liquid/Liquid Co-axial Swirl Injector," 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, F.L., U.S.A., AIAA 2011-838, Jan. 2011.
  3. Ramezani, A.R. and Ghafourian, A., "Spray Angle Variation of Liquid-Liquid Swirl Coaxial Injector," 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Tucson, A.Z., U.S.A., AIAA 2005-3747, July 2005.
  4. Yang, L.J. and Ge, M.H., "Spray Characteristics of a Recessed Gas-Liquid Coaxial Swirl Injecrot," Journal of Propulsion and Power, Vol. 24, No. 6, pp. 1332-1339, 2008. https://doi.org/10.2514/1.23977
  5. Jeon, J.H., Hong, M.G., Han, Y.M. and Lee, S.Y., "Experimental Study on Spray Characteristics of Gas-Centered Swirl Coaxial Injectors," Journal of Fluids Engineering, Vol. 133, No. 12, pp. 121303-1-7, 2011. https://doi.org/10.1115/1.4005344
  6. Kim, S.H. and Yoon, J.S., "Experimental Study on the Internal Flow Characteristics for Recess Length in a Swirl Coaxial Injector," 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, T.N., U.S.A., AIAA 2010-6812, July 2010.
  7. Tamaki, N., Shimizu, M., Nishida, K. and Hiroyasu, H., "Effects of Cavitation and Internal Flow on Atomization of a Liquid Jet," Atomization and Sprays, Vol. 8, No. 2, pp. 179-197, 1998. https://doi.org/10.1615/AtomizSpr.v8.i2.30
  8. Hiroyasu, H., "Spray Break-up Mechanism from the Hole-type Nozzle and Its Applications," Atomization and Sprays, Vol. 10, No. 3-5, pp. 511-527, 2000. https://doi.org/10.1615/AtomizSpr.v10.i3-5.130
  9. Kent, J.C. and Brown, G.M., "Nozzle Exit Flow Characteristics for Square-edged and Rounded Inlet Geometries," Combustion Science and Technology, Vol. 30, No. 1-6, pp. 121-132, 1983. https://doi.org/10.1080/00102208308923615
  10. Ganippa, L.C., Bark, G., Andersson, S. and Chomiak, J., "Cavitation: A Contributory Factor in the Transition from Symmetric to Asymmetric Jets in Cross-flow Nozzles," Experiments in Fluids, Vol. 36, No. 4, pp. 627-634, 2004. https://doi.org/10.1007/s00348-003-0736-4
  11. Hun, J., Kim, J.H. and Kim, J.S., "Spray Characteristics of Nonimpinging-type Injector According to the Injection Pressure Variation and Angular Direction of Orifices ," Journal of the Korean Society of Propulsion Engineers, Vol. 16, No. 3, pp. 1-8, 2016. https://doi.org/10.6108/KSPE.2012.16.3.001
  12. Kenny, R.J., Moser, M.D., Hulka, J. and Jones, G., "Cold Flow Testing for Liquid Propellant Rocket Injector Scaling and Throttling," AIAA-2006-4705, 2006.
  13. Stiesch, G., Modeling Engine Spray and Combustion Processes, Springer, Berlin, pp.119-192, 2003.
  14. Lefebvre, A.H., Atomization and Sprays, Taylor & Francis, New York, N.Y., U.S.A., 1989.