DOI QR코드

DOI QR Code

평지붕 설치 태양광시스템의 표면형태 조사·분석

Investigation and Analysis on the Surface Morphology of Roof-Top Photovoltaic System

  • 이응직 (세명대학교 건축공학과)
  • Lee, Eung-Jik (Department of Architectural Engineering, Semyung University)
  • 투고 : 2016.07.27
  • 심사 : 2016.08.16
  • 발행 : 2016.08.30

초록

Domestic photovoltaic system for roof-top is installed towards the south at an angle of 20 to 35 degrees and the shape of PV array is divided into two kinds; a plane shape and a curved shape. This paper aims to understand an actual condition of PV facility and strengths and weaknesses of support structure production and installation and to consider the best PV surface shape by analyzing theoretical logics of these two surface shapes and architectural perspective-based realistic case studies. This study targeted 98 facilities including common houses, public institutions and education institutions. In common houses, all of 59 PV facilities have a plane surface. In public institutions, 7 of 15 PV facilities have a curved array surface and 8 PV facilities have a plane surface. In education institutions, also, 14 of 24 PV facilities have a plane array surface and 10 PV facilities have a curved surface. Most of 98 facilities have a flat roof supporting shape. However, it was found that the curved shape wasn't positive for PV generation due to the change of radial density and it was at least 10 % more expensive to produce its structure. Also, domestic general large single-plate PV facilities have problems of harmony with buildings and wind load. Therefore, it is considered that for fixed-type roof-top PV, a plane PV array shape is good for optimum generation and economic efficiency and a parallel array structure on the roof surface is favorable to wind load and snow load without being a hindrance to the building facade.

키워드

참고문헌

  1. Yun D.-Y., Lee E.-J., A Basic Study on the Effect of the Wind Pressure according to Form on the Flat Roof mounted PV System, Journal of the KSES, Vol. 33, No. 5, pp. 109-110, 2013
  2. Kim J.-H., Yun D.-Y., Yoo D.-C., Lee E.-J., A Study on the Wind Pressure Resistance of Integrated PV Mount for Green Roof System, Proceedings of the KIEAE 2012 Spring Annual Conference, Vol. 22, pp. 210-211, 2012
  3. Jee J.-B., Choi Y.-J., Lee K.-T., The Study on the Optimal Angle of the Solar Panel using by Solar Radiation Model, Journal of the KSES, Vol. 32, No. 2, pp. 65-72, 2012
  4. Jo D.-K., Kang Y.-H., Analysis of Maximum Solar Radiation on Inclined Surfaces for the Installation of Solar Thermal Systems in Korea Using the Optimum Installation Angle, Journal of the KSES, Vol. 29, No. 2, pp. 48-53, 2009
  5. Lee E.-J., Kim H.-S., A Study on the Application Method of Photovoltaic in Building, Journal of the KSES, Vol. 22, No. 2, pp. 5-7, 2002
  6. Jo D.-K., Chun I.-S., Jeon M.-S., Kang Y.-H., Auh C.-M., A Study on the Analysis of Solar Radiation on Inclined Surfaces, Journal of the KSES, Vol. 21, No. 3, pp. 20-21, 2001
  7. Biba C., Heinicke D., Jacobs P., Payer T., Strom aus Sonnenlicht, Wagner & Co, Coelbe/Maburg, pp. 91-92, 1997
  8. http://de.wikipedia.org
  9. www.heise.de/
  10. http://wetter.andreae-gymnasium.de
  11. http://solarlightkorea.com
  12. http://www.해품광.com
  13. Korea Energy Agency, A Study on Domestic solar resource analysis and Measurement Technology, 1996-2005
  14. Ministry of Trade, Industry and Energy, The Support Announcement for Renewable Energy supply projects(Residental) 2016, 2016