Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Composite Behavior and Shear Strength of DH-Beams with Steel Deck Plates

무해체 데크플레이트 철판을 사용한 DH-beam의 합성거동과 전단강도

  • 문정호 (한남대학교 건축학부) ;
  • 오영훈 (건양대학교 의료공간디자인학과)
  • Received : 2015.05.18
  • Accepted : 2015.08.06
  • Published : 2016.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to examine the shear strength and structural performance of DH-Beams. The DH-Beam construction method uses thin steel plates as form-works and structural elements. Steel plates and rebars for DH-Beams were prefabricated at factory and then erected before casting concrete at construction sites. In this study, the contribution of steel plates to the shear strength of DH-Beam was evaluated since the plates were expected to work as reinforcements. Five test specimens were made for experimental and analytical studies. They consisted of two DH-Beams for the positive loading test and two DH-Beams for the negative loading test and a RC beam for the comparison purpose. Test results on DH-Beams were compared with design equations and the RC beam test result. It was proven that DH-Beams demonstrated the good shear behavior showing sufficient strengths and deformation capacities. Nonlinear analyses with test specimens were also used to evaluate the contribution of DH plates to strengths. Analytical models included various cases such as beams with lateral plates only or beams without any plates. These analyses also showed that steel plates can contribute to the enhancement of shear strength of DH-Beams. Based on experimental and analytical studies, it was concluded that steel plates of DH-Beams can be used as good shear reinforcements.

데크플레이트 철판을 성형하여 구성한 DH-Beam은 형틀 역할 뿐 아니라 합성거동에 기여할 것으로 판단되며, 본 연구에서는 DH 측판의 전단강도 기여도를 평가하고자 하였다. 총 5개의 실험체를 대상으로 실험 및 해석적 연구를 수행하였다. 실험체는 2개의 정가력 실험체, 2개의 부가력 실험체, 그리고 1개의 RC 실험체로 구성되었다. RC 실험체는 DH-Beam과 비교를 목적으로 제작하였다. DH-Beam에 대한 실험결과는 전단강도를 산정하는 설계식 그리고 RC 실험체에 대한 실험결과 등과 비교하였으며, 그 결과 DH-Beam의 측판은 전단강도에 기여하고 있다. 비선형 구조해석에서는 실험체를 대상으로 DH 판의 기여도를 평가하였다. 구조해석에서는 DH 측판 만 있는 경우 혹은 DH 판이 전혀 없는 경우 등 다양한 경우를 대상으로 하였다. 구조실험 및 해석적 연구의 결과 DH-Beam의 측판은 콘크리트와 합성단면을 형성하면서 전단강도에 기여하는 것으로 평가할 수 있다.

Keywords

References

  1. ACI Committee 318 (2008), Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary, American Concrete Institute.
  2. Architecture Institute Korea (2009), Design Code for Building Structures.
  3. Baik, I., Yoon, S., Chung, R., Cho, S., Hong, E. (2012), Structural Performance of Void deck Slab System, Proceeding of Korea Institute Concrete, 24(1), 693-694.
  4. Hawkins, N. M., Kuchma, D. A., Mast, R. F., Marsh, M. L., and Reineck, K. H. (2005), Simplified Shear Design of Structural Concrete Members, NCHRP Report 549, National Research Council.
  5. Kim, Y., Park, Y., Park, S., Ko, Y., Yang, K., Chung, H. (2003), An Experimental Study on the Flexural Behavior of Structural Deck Plate Continuous Slabs, Proceeding of Korea Institute Concrete, 15(2), 202-205.
  6. Park, K., Kyung, J., Jeon, S., Kim, D., Choi, S. (2012), Flexural Performance for Deep-deck Plate using Cap Plate, Proceeding of Architecture Institute Korea, 32(2), 505-506.
  7. Shim, H. J., Lee, E. T. (2004), Beam-Slab System Development of Story Height Reduction Based on Slim Floor System of High-rise Buildings, Proceeding of Architecture Institute Korea, 24(2), 103-106.
  8. TNO (2010), DIANA 9.4 User's Manual-Material Library