Abstract
National competency standards, which are the contents of the knowledge, skills and attitudes required to perform a job in industry, is organized by the country. the job performance was evaluated based on the National competency standards from the third-year grade of radiology students by using field-based training courses. according to the evaluation results, students showed over 93% satisfactory ratio of job performance in all radiography projection methods. Therefore, it can be predicted that field-based training courses for students made a positive effect on improving their job performance. Exposure methods with CR equipment were evaluated the best rating, yet it has various problems. The standard deviation between students was very high, and the CR operation skill of students was insufficient. Film methods was evaluated also showed problems, due to the exposure condition setting and developing operation. although DR method was rated good to the students, it was evaluated that the operation skill of DR and the ancillary equipment operation skill was shortage. By supplementing the evaluation factors below proficiency levels to a course management in each exposure method, it could help students course achievement. Also, it could help students to improve job performance of clinical areas after graduation.
국가직무능력표준(National competency standards, NCS)은 산업현장에서 직무를 수행하기 위해 요구되는 지식, 기술, 태도 등의 내용을 국가가 체계화한 것이다. NCS기반 현장중심 교육과정을 적용한 방사선과 재학생 3학년을 대상으로 일반촬영에 대한 방사선사 직무수행도를 평가하였다. 평가 결과, 모든 촬영방식에서 우수 및 충족 비율이 93% 이상으로 현장중심 교육과정이 재학생의 직무수행도 향상에 긍정적인 영향을 끼친 것으로 판단된다. CR 방식은 전체적으로 가장 우수한 평가를 받았으나 대상자 간 편차가 크고 영상기기조작능력이 부족한 것으로 평가되었고 Film 방식은 노출조건 설정 및 현상작업이 문제점으로 평가되었다. DR 방식은 우수한 평가를 받았으나 영상기기조작능력, 부속기자재운영능력이 부족한 것으로 평가되었다. 각 촬영에서 성취수준 이하의 평가요소를 교과목 운영에 보완한다면 재학생의 학업성취도 향상뿐만 아니라 졸업 후 임상에서 방사선사 직무수행도 향상에 도움이 되리라 판단 한다.