DOI QR코드

DOI QR Code

A Review on the Flammability and Flame Retardant Properties of Natural Fibers and Polymer Matrix Based Composites

  • Prabhakar, M.N. (Department of Mechanical Engineering, Changwon National University) ;
  • Shah, Atta Ur Rehaman (Department of Mechanical Engineering, Changwon National University) ;
  • Song, Jung-Il (Department of Mechanical Engineering, Changwon National University,)
  • 투고 : 2014.12.27
  • 심사 : 2015.04.28
  • 발행 : 2015.04.30

초록

Natural fibers reinforced polymer composites are being used in several low strength applications. More research is going on to improve their mechanical and interface properties for structural applications. However, these composites have serious issues regarding flammability, which are not being focused broadly. A limited amount of literature has been published on the flame retardant techniques and flammability factor of natural fibers based polymer matrix composites. Therefore, it is needed to address the flammability properties of natural fibers based polymer composites to expand their application area. This paper summarizes some of the recent literature published on the subject of flammability and flame retardant methods applied to natural fibers reinforced polymer matrix composites. Different factors affecting the flammability, flame retardant solutions, mechanisms and characterization techniques have been discussed in detail.

키워드

참고문헌

  1. Sergio Neves Monteiro, Felipe Perisse D. Lopes, Ailton Silva Ferreira, and Denise Cristina O. Nascimento, "Natural-fiber polymer-matrix Composites: Cheaper, Tougher, and Environmentally Friendly," JOM, Vol. 61, 2009, pp. 17-22.
  2. John A. Bishopp, "The History of $Redux^{(R)}$ and the Redux Bonding Process," International Journal of Adhesion and Adhesives, Vol. 17, 1997, pp. 287-301. https://doi.org/10.1016/S0143-7496(97)00023-7
  3. Liliana B. Manfredi, Exequiel S. Rodriguez, Maria Wladyka-Przybylak, and Analia Vazquez, "Thermal Degradation and Flame Resistance of Unsaturated Polyester, Modified Acrylic Resins and Their Composites with Natural Fibres," Polymer Degradation and Stability, Vol. 91, 2006, pp. 255-261. https://doi.org/10.1016/j.polymdegradstab.2005.05.003
  4. James Holbery and Dan Houston, "Natural-fiber-reinforced Polymer Composites in Automotive Applications," JOM, 2006, Vol. 58, pp. 80-86.
  5. David, B., Dittenber, Hota V.S., and Ganga Rao, "Critical Review of Recent Publications on Use of Natural Composites in Infrastructure," Composites Part A: Applied Science and Manufacturing, Vol. 43, 2012, pp. 1419-1429. https://doi.org/10.1016/j.compositesa.2011.11.019
  6. Dorez, G., Taguet, A., Ferry, L., and Lopez-Cuesta, J.M., "Thermal and Flame Behavior of Natural Fibers/PBS Biocomposites," Polymer Degradation and Stability, Vol. 98, 2013, pp. 87-95. https://doi.org/10.1016/j.polymdegradstab.2012.10.026
  7. Zhang, Z.X., Zhang, J., Lu, B.-X., Xin, Z.X., Kang, C.K., and Kim, J.K., "Effect of Flame Retardants on Mechanical Properties, Flammability and Foamability of PP/Wood-fiber Composites," Composites Part B: Engineering, Vol. 43, 2012, pp. 150-158.
  8. Royal Aeronautical Society - Smoke, Flame and Fumes in Transport Aircraft - Past History, Current Risk And Recommended Mitigations. Second Edition 2013 (www.aerosociety.com
  9. Shaw, J., "A Review of Smoke and Potential In-flight Flame Events in 1999," Tech. Rep. Doc 185, Society of Automotive Engineers, Washington, DC, USA, 2000.
  10. Boeing Aero, "Flight and Cabin Crew Response to Inflight Smoke," 2013.
  11. Bourbigot, S., and Fontaine, G., "Flame Retardancy of Polylactide: An Overview," Polymer Chemistry, Vol. 1, 2010, pp. 1413-1422. https://doi.org/10.1039/c0py00106f
  12. Chapple, S., and Anandjiwala, R., "Flammability of Natural Fibre-reinforced Composites and Strategies for Flame Retardancy: A Review," Journal of Thermoplastic Composite Materials, Vol. 23, 2010, pp. 871-893. https://doi.org/10.1177/0892705709356338
  13. Kandola, B.K., "Flame Retardant Characteristics of Natural Fibre Composites", In M. J. John, & S. Thomas (Eds.), Natural Polymers, volume 1: Composites (pp.86-117). United Kingdom: The Royal Society of Chemistry (2012).
  14. Price, D., Anthony, G., and Carty, P., Introduction: Polymer Combustion, Condensed Phase Pyrolysis and Smoke Formation. In A. R. Horrocks, & D. Price (Eds.), Flame Retardant Materials (pp. 1-30). England: Wood Head Publishing Limited, 2001.
  15. Silvana Sauca, Marta Giamberini, and Jose Antonio Reina, "Flame Retardant Phosphorous-containing Polymers Obtained by Chemically Modifying Poly(vinyl alcohol)," Polymer Degradation and Stability, Vol. 98, 2013, pp. 453-463. https://doi.org/10.1016/j.polymdegradstab.2012.07.045
  16. The Minerals, Metals & Materials Society (TMS) (2011) Synthesis and Characterization of Flame Retarding UV-Curable Boron Containing Hybrid Coatings, in Supplemental Proceedings: General Paper Selections, Vol. 3, John Wiley & Sons, Inc., Hoboken, NJ, USA.
  17. Tsafack, M.J., and Levalois-Grutzmacher, J., "Towards Multifunctional Surfaces Using the Plasma-induced Graft-polymerization (PIGP) Process: Flame and Waterproof Cotton Textiles," Surface and Coatings Technology, Vol. 201, 2007, pp. 5789-5795. https://doi.org/10.1016/j.surfcoat.2006.10.027
  18. Chaiwong, C., Tunma, S., Sangprasert, W., Nimmanpipug, P., and Boonyawan, D., "Graft Polymerization of Flame-retardant Compound onto Silk via Plasma Jet," Surface and Coatings Technology, Vol. 204, 2010, pp. 2991-2995. https://doi.org/10.1016/j.surfcoat.2010.02.044
  19. Boonchoat Paosawatyanyong, Piyarat Jermsutjarit, and Worawan Bhanthumnavin, "Surface Nanomodification of Cotton Fiber for Flame Retardant Application," Journal of Nano-science and Nanotechnology, Vol. 12, 2012, pp. 748-753. https://doi.org/10.1166/jnn.2012.5367
  20. Morgan, A.B., "Flame Retarded Polymer Layered Silicate Nanocomposites: A Review of Commercial and Open Literature Systems," Polymer Advanced Technology, Vol. 17, 2006, pp. 206-217. https://doi.org/10.1002/pat.685
  21. Chen, L., and Wang, Y.Z., "A Review on Flame Retardant Technology in China. Part I: Development of Flame Retardants," Polymer Advanced Technology, Vol. 21, 2010, pp. 1-26.
  22. Siska Hamdani, Claire Longuet, Didier Perrin, Jose-Marie Lopez-cuesta, and Francois Ganachaud, "Flame Retardancy of Silicone-based Materials," Polymer Degradation and Stability, Vol. 94, 2009, pp. 465-495. https://doi.org/10.1016/j.polymdegradstab.2008.11.019
  23. Richard Hull, T., Artur Witkowski, and Luke Hollingbery, "Flame Retardant Action of Mineral Fillers," Polymer Degradation and Stability, Vol. 96, 2011, pp. 1462-1469. https://doi.org/10.1016/j.polymdegradstab.2011.05.006
  24. Toshikazu Umemura, Yoshihiko Arao, Sakae Nakamura, Yuta Tomita, and Tatsuya Tanaka, "Synergy Effects of Wood Flour and Flame Retardants in Flammability of Wood-plastic Composites," Energy Procedia, Vol. 56, 2014, pp. 48-56. https://doi.org/10.1016/j.egypro.2014.07.130
  25. Atta ur Rehman Shah, Prabhakar, M.N., D.-W. Lee, B.-S., Kim, and Song, J.I., "Development and Characterization of Oyster Shell Powder Filled Polypropylene Composite," Composites Research, Vol. 27, 2014, pp. 201-206. https://doi.org/10.7234/composres.2014.27.5.201
  26. Ahmed El-Sabbagh, Leif Steuernagel, Gerhard Ziegmann, Dieter Meiners, and Oliver Toepfer, "Processing Parameters and Characterisation of Flax Fibre Reinforced Engineering Plastic Composites with Flame Retardant Fillers," Composites Part B: Engineering, Vol. 62, 2014, pp. 12-18. https://doi.org/10.1016/j.compositesb.2014.02.009
  27. Yoshihiko Arao, Sakae Nakamura, Yuta Tomita, Kyouhei Takakuwa, Toshikazu Umemura, and Tatsuya Tanaka, "Improvement on Flame Retardancy of Wood Flour/polypropylene Composites Using Various Flame Retardants," Polymer Degradation and Stability, Vol. 100, 2014, pp. 79-85. https://doi.org/10.1016/j.polymdegradstab.2013.12.022
  28. Aruna Subasinghe, and Debes Bhattacharyya, "Performance of Different Intumescent Ammonium Polyphosphate Flame Retardants in PP/kenaf Fibre Composites," Composites Part A: Applied Science and Manufacturing, Vol. 65, 2014, pp. 91-99. https://doi.org/10.1016/j.compositesa.2014.06.001
  29. Nadir Ayrilmis, Turgay Akbulut, Turker Dundar, Robert H. White, Fatih Mengeloglu, Umit Buyuksari, Zeki Candan, and Erkan Avci, "Effect of Boron and Phosphate Compounds on Physical, Mechanical, and Flame Properties of Wood-polypropylene Composites," Construction and Building Materials, Vol. 33, 2012, pp. 63-69. https://doi.org/10.1016/j.conbuildmat.2012.01.013
  30. Nitinat Suppakarn, and Kasama Jarukumjorn, "Mechanical Properties and Flammability of Sisal/PP Composites: Effect of Flame Retardant Type and Content," Composites Part B: Engineering, Vol. 40, 2009, pp. 613-618.
  31. Cardenas, M.A., Garcia-Lopez, D., Gobernado-Mitre, I., Merino, J.C., Pastor, J.M., J. de D. Martinez, Barbeta, J., and Calveras, D., "Mechanical and Flame Retardant Properties of EVA/clay/ATH Nanocomposites - Effect of Particle Size and Surface Treatment of ATH Filler," Polymer Degradation and Stability, Vol. 93, 2008, pp. 2032-2037. https://doi.org/10.1016/j.polymdegradstab.2008.02.015
  32. David B. Dittenber, and Hota V.S. GangaRao, "Critical Review of Recent Publications on Use of Natural Composites in Infrastructure," Composites Part A: Applied Science and Manufacturing, Vol. 43, 2012, pp. 1419-1429. https://doi.org/10.1016/j.compositesa.2011.11.019
  33. John, M., and Thomas, S., "Bio-fibres and Biocomposites," Carbohydrate Polymers, Vol. 71, 2008, pp. 343-64. https://doi.org/10.1016/j.carbpol.2007.05.040
  34. Methacanon, P., Weerawatsophon, U., Sumransin, N., Prahsarn, C., and Bergado, D.T., "Properties and Potential Application of the Selected Natural Fibers as Limited Life Geotextiles," Carbohydrate Polymers, Vol. 82, 2010, pp. 1090-1096. https://doi.org/10.1016/j.carbpol.2010.06.036
  35. Beg, M.D.H., and Pickering, K.L., "Accelerated Weathering of Unbleached and Bleached Kraft Wood Fibre Reinforced Polypropylene Composites," Polymer Degradation and Stability, Vol. 93, 2008, pp.1939-46. https://doi.org/10.1016/j.polymdegradstab.2008.06.012
  36. Suardana, N.P.G., Ku, M.S., and Lim, J.K., "Effects of Diammonium Phosphate on the Flammability and Mechanical Properties of Bio-composites," Materials and Design, Vol. 32, 2011, pp. 1990-1999. https://doi.org/10.1016/j.matdes.2010.11.069
  37. Grexa, O., and Lubke, H., "Flammability Parameters of Wood Tested on Acone Calorimeter", Polymer Degradation and Stability, Vol. 74, 2001, pp. 427-432. https://doi.org/10.1016/S0141-3910(01)00181-1
  38. Hapuarachchi, T.D., and Peijs, T., "Multiwalled Carbon Nanotubes Andsepiolite Nanoclays as Flame Retardants for Polylactide and Its Natural Fibre Reinforced Composites", Composites: Part A, Vol. 41, 2010, pp. 954-963. https://doi.org/10.1016/j.compositesa.2010.03.004
  39. Jang, J.Y., Jeong, T.K., Oh, H.J., Youn, J.R., and Song, Y.S., "Thermal Stability and Flammability of Coconut Fiber Reinforced Poly(lactic acid) Composites," Composites: Part B, Vol. 43, 2012, pp. 2434-2438. https://doi.org/10.1016/j.compositesb.2011.11.003
  40. Reti, C., Casetta, M., Duquesne, S., Delobel, R., Soulestin, J., and Bourbigot, S., "Intumescent Biobased-polylactide Films to Flame Retard Nonwovens", Journal of Engineered Fibers and Fabrics, Vol. 4, 2009, pp. 33-39.
  41. Sikoutris, D.E., and Kostopoulos, V., "Flame Response of Polymers and Polymer Composites. Part A: Multistage Degradation Kinetics," Journal of Composite Materials, 2013, pp. 1-7.
  42. Serge Bourbigota, and Sophie Duquesne, "Flame Retardant Polymers: Recent Developments and Opportunities," Journal of Materials Chemistry, Vol. 17, 2007, pp. 2283-2300. https://doi.org/10.1039/b702511d
  43. Guobo Huang, Jianrong Gao, Xu Wang, Huading Liang, and Changhua Ge, "How Can Graphene Reduce the Flammability of Polymer Nanocomposites?," Materials Letters, Vol. 66, 2012, pp. 187-189. https://doi.org/10.1016/j.matlet.2011.08.063
  44. Zhengping Fang, Pingan Song, Lifang Tong, Zhenghong Guo, "Thermal Degradation and Flame Retardancy of Polypropylene/C60 Nanocomposites," Thermochimica Acta, Vol. 473, 2008, pp. 106-108. https://doi.org/10.1016/j.tca.2008.04.019
  45. Ngakan Putu Gede Suardana, Min Seuck Ku, and Jae Kyoo Lim, "Effects of Diammonium Phosphate on the Flammability and Mechanical Properties of Bio-composites," Materials and Design, Vol. 32, 2011, pp. 1990-1999. https://doi.org/10.1016/j.matdes.2010.11.069
  46. Hirschler, M., "Heat Release from Plastic Materials. In Heat Release in Flames," Babrauskas V, Grayson S (eds). E & FN Spon: UK, 1996.
  47. Ke, C.H., Li, J., Fang, K.Y., Zhu, Q.L., Zhu, J., and Yan, "Q., Synergistic Effect between a Novel Hyper Branched Charring Agent and Ammonium Polyphosphate on the Flame Retardant and Anti-dripping Properties of Polylactide", Polymer Degradation and Stability, Vol. 95, 2010, 763-770. https://doi.org/10.1016/j.polymdegradstab.2010.02.011
  48. Joseph, P., and Ebdon, J., Recent Developments in Flameretarding Thermoplastics and Thermosets. In Flame Retardant Material, Horrocks AR, Price D (eds). Wood head Publishing Limited: UK, 2000.
  49. Nicole M. Stark, Robert H. White, Scott A. Mueller, and Tim A. Osswald, "Evaluation of Various Flame Retardants for Use in Wood Flour-polyethylene Composites," Polymer Degradation and Stability, Vol. 95, 2010, pp. 1903-1910. https://doi.org/10.1016/j.polymdegradstab.2010.04.014
  50. Shumao, L., Jie, R., Hua, Y., Tao, Y., and Weizhong, Y., "Influence of Ammonium Polyphosphate on the Flame Retardancy and Mechanical Properties of Ramie Fiber-reinforced Poly(lactic acid) Biocomposites," Polymer International, Vol. 59, 2010, pp. 242-248.
  51. Helwig, M., and Pauksta, D., "Flammability of Composites Based on Polypropylene and Flax Fibers," Molecular Crystals and Liquid Crystals, Vol. 354, 2000, pp. 373-380. https://doi.org/10.1080/10587250008023629
  52. Chai, M.W., Bickerton, S., Bhattacharyya, D., and Das, R., "Influence of Natural Fibre Reinforcements on the Flammability of Bio-derived Composite Materials," Composites Part B: Engineering, Vol. 43, 2012, pp. 2867-2874. https://doi.org/10.1016/j.compositesb.2012.04.051
  53. Borysiak, S., Pauksta, D., and Helwig, M., "Flammability of Wood-polypropylene Composites," Polymer Degradation and Stability, Vol. 91, 2006, pp. 3339-43. https://doi.org/10.1016/j.polymdegradstab.2006.06.002
  54. Russo, P., Carfagna, C., Cimino, F., Acierno, D., and Persico, P., "Biodegradable Composites Reinforced with Kenaf Fibre: Thermal, Mechanical, and Morphological Issues," Advances in Polymer Technology, Vol. 32, 2012, pp. 313-322.
  55. Federico Carosio, Jenny Alongi, and Alberto Frache, "Influence of Surface Activation by Plasma and Nanoparticle Adsorption on the Morphology, Thermal Stability and Combustion Behaviour of PET Fabrics," European Polymer Journal, Vol. 47, 2011, pp. 893-902. https://doi.org/10.1016/j.eurpolymj.2011.01.009
  56. Lee, S.-H., and Wang, S., "Biodegradable Polymers/bamboo Fiber Bio-composite with Bio-based Coupling Agent," Composites Part A: Applied Science and Manufacturing, Vol. 37, 2006, pp. 80-91. https://doi.org/10.1016/j.compositesa.2005.04.015
  57. Lee, B.H., Kim, H.S., Lee, S., Kim, H.J., and Dorgan, J. R., "Biocomposites of Kenaf Fibers in Polylactide: Role of Improved Interfacial Adhesion in the Carding Process," Composites Science and Technology, Vol. 69, 2009, pp. 2573-2579. https://doi.org/10.1016/j.compscitech.2009.07.015
  58. Sudhakara, P., Kamala Devi, A.P., Venkata Prasad, C., Obi Reddy, K., Dong Woo, L., Kim, B.S. and Song, J.I., "Thermal, Mechanical, and Morphological Properties of Maleated Polypropylene Compatibilized Borassus Fruit Fiber/polypropylene Composites", Journal of Applied Polymer Science, Vol. 128, 2013, pp. 976-982. https://doi.org/10.1002/app.38135
  59. Lin, H., Han, L., and Dong, L., "Thermal Degradation Behaviour and Gas Phase Flame retardant Mechanism of Polylactide/PCPP Blends", Journal of Applied Polymer Science, Vol. 131, 2014, pp. 40480.
  60. Wang, Z.Y., Liu, Y., and Wang, Q., "Flame Retardant Polyoxymethylene with Aluminium Hydroxide/melaminE/Navolac Resin Synergistic System", Polymer Degradation and Stability, Vol. 95, 2010, pp. 945. https://doi.org/10.1016/j.polymdegradstab.2010.03.028
  61. Nana Tian, Xin Wen, Zhiwei Jiang, Jiang Gong, Yanhui Wang, Jian Xue, and Tao Tang, "Synergistic Effect between a Novel Char Forming Agent and Ammonium Polyphosphate on Flame Retardancy and Thermal Properties of Polypropylene," Industrial & Engineering Chemistry Research, Vol. 52, 2013, pp. 10905-10915. https://doi.org/10.1021/ie401058u
  62. Bernhard Schartel, "Phosphorus-based Flame Retardancy Mechanisms-Old Hat or a Starting Point for Future Development?", Materials, Vol. 3, 2010, pp. 4710-4745. https://doi.org/10.3390/ma3104710
  63. Li, G., Wang, W., Cao, S., Cao, Y., and Wang, J., "Reactive, Intumescent, Halogen-free Flame Retardant for Polypropylene", Journal of Applied Polymer Science, 2014, pp. 131.
  64. Su, G., Saunders, D., Yu, Y., Yu, H., Zhang, X., Liu, H., and Giesy, J.P., "Occurrence of Additive Brominated Flame Retardants in Aquatic Organisms from Tai Lake and Yangtze River in Eastern China," Chemosphere, Vol. 114, 2014, pp. 340-346. https://doi.org/10.1016/j.chemosphere.2014.05.046
  65. Zhengyi Jiang, Xianghua Liu, Sihai Jiao and Jingtao Han, "Zinc Hydroxystannate-Coated Mineral Grade $Mg(OH)_2$ as Flame-Retardant and Smoke Suppression for Flexible PVC," Advanced Materials Research, Vol. 652, 2013, pp. 481-484.
  66. Walker, J.K., Luke, E., Chen, T., and Ivarov, A., "Synergies of Metal Hydroxides and Metal Molybdates in Low-Smoke Flexible PVC", Proceedings of the 57th IWCS Conference, Providence, RI 2008.
  67. Giovanni Camino, A. Maffezzoli, M. Braglia, M. De Lazzaro, and M. Zammarano, "Effect of Hydroxides and Hydroxycarbonate Structure on Flame Retardant Effectiveness and Mechanical Properties in Ethylene-vinyl Acetate Copolymer," Polymer Degradation and Stability, Vol. 74, 2001, pp. 457-464. https://doi.org/10.1016/S0141-3910(01)00167-7
  68. Belousova, R.G., Schwartz, E.M., Zarina, I.E., and Valdniece, D. J., Low-Toxicity Boron-Containing Flame-Retardant Additives for Polymeric Coatings", Russian Journal of Applied Chemistry, Vol. 83, 2010, pp. 328-331. https://doi.org/10.1134/S1070427210020278
  69. Mehran Alaee, Pedro Arias, Andreas Sjodin, and Ake Bergman, "An Overview of Commercially Used Brominated Flame Retardants, Their Applications, Their Use Patterns in Different Countries/regions and Possible Modes of Release," Environment International, Vol. 29, 2003, pp. 683-689. https://doi.org/10.1016/S0160-4120(03)00121-1
  70. Eunha Hoh, Lingyan Zhu, and Ronald A. Hites, "Dechlorane Plus, a Chlorinated Flame Retardant, in the Great Lakes," Environmental Science and Technology, Vol. 40, 2006, pp. 1184-1189. https://doi.org/10.1021/es051911h
  71. Chang, Y.L., Wang, Y.Z., Ban, D.M., Yang, B., and Zhao, G.M. "A Novel Phosphorus-Containing Polymer as a Highly Effective Flame Retardant", Macromol. Mater. Eng., Vol. 289, 2004, pp. 703-707. https://doi.org/10.1002/mame.200400064
  72. Klatt, M., Nitrogen-Based Flame Retardants, in Non-Halogenated Flame Retardant Handbook (eds A. B. Morgan and C. A. Wilkie), John Wiley & Sons, Inc., Hoboken, NJ, USA (2014).
  73. Kashiwagi, T., Gilman, J.W., Flame Retardancy of Polymeric Materials, Marcel Dekker Inc., New York, A. F. Grand and C. A. Wilkie Editors, Vol. 10, 2000, pp. 353.
  74. Siska Hamdania, Claire Longueta, Didier Perrina, Jose-Marie Lopez-cuestaa, and Francois Ganachaudb, "Flame Retardancy of Silicone-based Materials," Polymer Degradation and Stability, Vol. 94, 2009, pp. 465-495. https://doi.org/10.1016/j.polymdegradstab.2008.11.019
  75. Takashi Kashiwagi, John R. Shields, Richard H. Harris, Jr., and Rick D. Davis, "Flame-Retardant Mechanism of Silica: Effects of Resin Molecular Weight," Journal of Applied Polymer Science, Vol. 87, 2003, pp. 1541-1553. https://doi.org/10.1002/app.11967
  76. Galloa, E., Schartela, B., Aciernob, D., and Russob, P., "Flame Retardant Biocomposites: Synergism between Phosphinate and Nanometric Metal Oxides," European Polymer Journal, Vol. 47, 2011, pp. 1390-1401. https://doi.org/10.1016/j.eurpolymj.2011.04.001
  77. Gallo, E., Schartel, B., Braun, U., Russo, P., and Acierno, D., "Flame Retardant Synergisms between Nanometric $Fe_2O_3$ and Aluminum Phosphinate in Poly(butylene terephthalate)", Polymer Advvanced Technologies, Vol. 22, 2011, pp. 2382-2391. https://doi.org/10.1002/pat.1774
  78. Kashiwagi, T., Du, F., Winey, K.I., Groth, K.M., Shields, J.R., Bellayer, S.P., Kim, H., and Douglas, J.F., "Flammability Properties of Polymer Nanocomposites With Single-Walled Carbon Nanotubes: Effects of Nanotube Dispersion and Concentration," Polymer, Vol. 46, 2005, pp. 471. https://doi.org/10.1016/j.polymer.2004.10.087
  79. Schartel, B., Potschke, P., Knoll, U., and Abdel-Goad, M., "Flame Behaviour of Polyamide 6/multiwall Carbon Nanotube Nanocomposites", European Polymer Journal, Vol. 41, 2005, pp. 1061. https://doi.org/10.1016/j.eurpolymj.2004.11.023
  80. Bocchini, S., Frache, A., Camino, G., and Claes, M., "Polyethylene Thermal Oxidative Stabilisation in Carbon Nanotubes Based Nanocomposites," European Polymer Journal, Vol. 43, 2007, pp. 3222. https://doi.org/10.1016/j.eurpolymj.2007.05.012
  81. Bettina Dittricha, Karen-Alessa Wartigb, Daniel Hofmannb, Rolf Mulhauptb, and Bernhard Schartela, "Flame Retardancy Through Carbon Nanomaterials: Carbon Black, Multiwall Nanotubes, Expanded Graphite, Multi-layer Graphene and Graphene in Polypropylene," Polymer Degradation and Stability, Vol. 98, 2013, pp. 1495-1505. https://doi.org/10.1016/j.polymdegradstab.2013.04.009
  82. Takashi Kashiwagi, Fangming Du, Jack F. Douglas, Karen I. Winey, Richard H. Harris, and Jr & John R. Shields, "Nanoparticle Networks Reduce the Flammability of Polymer Nanocomposites," Nature Materials, Vol. 4, 2005, pp. 928-933. https://doi.org/10.1038/nmat1502
  83. Aravind Dasari, Zhong-Zhen Yu, Yiu-Wing Mai, Guipeng Cai, Huaihe Song, B., "Roles of Graphite Oxide, Clay and POSS during the Combustion of Polyamide 6, Polymer," Polymer, Vol. 50, 2009, pp. 1577-1587. https://doi.org/10.1016/j.polymer.2009.01.050
  84. Elsa Franchini, Jocelyne Galy, Jean-Francois Gerard, Daniela Tabuani, Andrea Medici, "Influence of POSS Structure on the Flame Retardant Properties of Epoxy Hybrid Networks," Polymer Degradation and Stability, Vol. 94, 2009, pp. 1728-1736. https://doi.org/10.1016/j.polymdegradstab.2009.06.025
  85. Lin, M., Li, B., Li, Q., Li, S., and Zhang, S., "Synergistic Effect of Metal Oxides on the Flame Retardancy and Thermal Degradation of Novel Intumescent Flame-retardant Thermoplastic Polyurethanes," Journal of Applied Polymer Science, Vol. 121, 2011, pp. 1951-1960. https://doi.org/10.1002/app.33759
  86. Ynh-Yue Yena, Hsin-Ta Wanga, and Wen-Jen Guob, "Synergistic Flame Retardant Effect of Metal Hydroxide and Nano-clay in EVA Composites," Polymer Degradation and Stability, Vol. 97, 2012, pp. 863-869. https://doi.org/10.1016/j.polymdegradstab.2012.03.043
  87. Nah, C., Oh, J., Mensah, B., Jeong, K.-U., Ahn, D.U., Kim, S.-J., Lee, Y., and Nam, S.-H., "Effects of Thermal aging on Degradation Mechanism of Flame Retardant-filled Ethylene-propylene- diene Termonomer Compounds," Journal of Applied Polymer Science, Vol. 132, 2015, pp. 41324.
  88. Aaron C. Small, CCT-M, Thomas Plaisted, Martin Rogers, Frances Davis and Lisa Sterner, "A Non-Halogenated Flame Retardant Additive for Pultrusion," Composites Research Journal, Vol. 2, 2008, pp. 15.
  89. Kandola, B.K., "Flame Retardant Characteristics of Natural Fibre Composites", In M. J. John, and S. Thomas (Eds.), Natural Polymers, Vol. 1: Composites, 2012, pp. 86-117.
  90. Patel, P., Hull, T.R., and Moffatt, C., "PEEK Polymer Flammability and the Inadequacy of the UL-94 Classification," Flame and Materials, Vol. 36, 2012, pp. 185-201.
  91. Guillaume, E., Marquis, D., and Saragoza, L., "Calibration of Flow Rate in Cone Calorimeter Tests," Flame and Materials, Vol. 38, 2014, pp. 194-203.
  92. Pettigrew, A., "Halogenated Flame Retardants. In: Kirk-Othmer Encyclopaedia of Chemical Technology," 4th ed. New York, John Wiley & Sons, Vol. 10, 1993, pp. 954-976.

피인용 문헌

  1. Effect of inorganic fillers and ammonium polyphosphate on the flammability, thermal stability, and mechanical properties of abaca-fabric/vinyl ester composites vol.18, pp.3, 2017, https://doi.org/10.1007/s12221-017-6859-7
  2. 폴리프로필렌 기반 자기강화 복합재료의 기계적물성 및 난연성 연구 vol.30, pp.3, 2015, https://doi.org/10.7234/composres.2017.30.3.223
  3. Influence of Four Coatings on the Mold-Resistance and Combustion Performance of Decorative Bamboo Curtain vol.50, pp.4, 2015, https://doi.org/10.22382/wfs-2018-056
  4. A comprehensive review on the vibration and damping characteristics of vegetable fiber-reinforced composites vol.38, pp.17, 2019, https://doi.org/10.1177/0731684419838340
  5. Fire-Safe Polymer Composites: Flame-Retardant Effect of Nanofillers vol.13, pp.4, 2015, https://doi.org/10.3390/polym13040540
  6. Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites vol.13, pp.8, 2015, https://doi.org/10.3390/polym13081282
  7. Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties vol.13, pp.9, 2015, https://doi.org/10.3390/polym13091532
  8. Flammability of Short Agro-Waste Pineapple Leaf Fiber Reinforced Polypropylene Composite Modified with Diammonium Phosphate Flame Retardant and Titanium Dioxide vol.22, pp.6, 2021, https://doi.org/10.1007/s12221-021-0528-6
  9. Thermal and flammability properties of polyethylene composites with fibers to replace natural wood vol.40, pp.19, 2015, https://doi.org/10.1177/07316844211002895
  10. Effect of Cyrtostachys renda Fiber Loading on the Mechanical, Morphology, and Flammability Properties of Multi-Walled Carbon Nanotubes/Phenolic Bio-Composites vol.11, pp.11, 2015, https://doi.org/10.3390/nano11113049
  11. Experimental and Statistical Analysis of Saw Mill Wood Waste Composite Properties for Practical Applications vol.13, pp.22, 2021, https://doi.org/10.3390/polym13224038
  12. Modification of Glass/Polyester Laminates with Flame Retardants vol.14, pp.24, 2015, https://doi.org/10.3390/ma14247901
  13. Fire Behavior of Wood-Based Composite Materials vol.13, pp.24, 2015, https://doi.org/10.3390/polym13244352