DOI QR코드

DOI QR Code

Alternative approach for the derivation of an eigenvalue problem for a Bernoulli-Euler beam carrying a single in-span elastic rod with a tip-mounted mass

  • Gurgoze, Metin (Faculty of Mechanical Engineering, Technical University of Istanbul) ;
  • Zeren, Serkan (Department of Mechanical Engineering, Istanbul Arel University)
  • 투고 : 2014.06.27
  • 심사 : 2014.10.27
  • 발행 : 2015.03.25

초록

Many vibrating mechanical systems from the real life are modeled as combined dynamical systems consisting of beams to which spring-mass secondary systems are attached. In most of the publications on this topic, masses of the helical springs are neglected. In a paper (Cha et al. 2008) published recently, the eigencharacteristics of an arbitrary supported Bernoulli-Euler beam with multiple in-span helical spring-mass systems were determined via the solution of the established eigenvalue problem, where the springs were modeled as axially vibrating rods. In the present article, the authors used the assumed modes method in the usual sense and obtained the equations of motion from Lagrange Equations and arrived at a generalized eigenvalue problem after applying a Galerkin procedure. The aim of the present paper is simply to show that one can arrive at the corresponding generalized eigenvalue problem by following a quite different way, namely, by using the so-called "characteristic force" method. Further, parametric investigations are carried out for two representative types of supporting conditions of the bending beam.

키워드

참고문헌

  1. Banerjee, J.R. (2012), "Free vibration of beams carrying spring-mass systems - A dynamic stiffness approach", Comput. Struct., 104-105, 21-26. https://doi.org/10.1016/j.compstruc.2012.02.020
  2. Cha, P.D., Chan, M. and Nielsen, G. (2008), "Eigenfrequencies of an arbitrarily supported beam carrying multiple in-span elastic rod-mass systems", ASME J. Vib. Acoust., 130, 061008-1-9. https://doi.org/10.1115/1.2980384
  3. Cha, P.D. and Honda, M. (2010), "Using a characteristic force approach to determine the eigensolutions of an arbitrarily supported linear structure carrying lumped attachments", ASME J. Vib. Acoust., 132, 051011-1-9. https://doi.org/10.1115/1.4001515
  4. Cha, P.D. (2013), Private Communication.
  5. Darabi, M.A., Kazemirad, S. and Ghayesh, M.H. (2012), "Free vibrations of beam-mass-spring systems: analytical analysis with numerical confirmation", Acta Mech. Sin., 28(2), 468-481. https://doi.org/10.1007/s10409-012-0010-1
  6. De Rosa, M.A., Lippiello, M., Maurizi, M.J. and Martin, H.D. (2010), "Free vibration of elastically restrained cantilever tapered beams with concentrated viscous damping and mass", Mech. Res. Commun., 37, 261-264. https://doi.org/10.1016/j.mechrescom.2009.11.006
  7. Goncalves, P.J.P., Brennan, M.J. and Elliott, S.J. (2007), "Numerical evaluation of high-order modes of vibration in uniform Euler-Bernoulli beams", J. Sound Vib., 301, 1035-1039. https://doi.org/10.1016/j.jsv.2006.10.012
  8. Gurgoze, M. (2005), "On the eigenfrequencies of a cantilever beam carrying a tip spring-mass system with mass of the helical spring considered", J. Sound Vib., 282(3-5), 1221-1230. https://doi.org/10.1016/j.jsv.2004.04.020
  9. Gurgoze, M., Cakar, O. and Zeren, S. (2006), "On the frequency equation of a combined system consisting of a simply supported beam and in-span helical spring-mass with mass of the helical spring considered", J. Sound Vib., 295(1-2), 436-449. https://doi.org/10.1016/j.jsv.2006.01.027
  10. Gurgoze, M., Zeren, S. and Bicak, M.M.A. (2008), "On the consideration of the masses of helical springs in damped combined systems consisting of two continua", Struct. Eng. Mech., 28(2), 167-188. https://doi.org/10.12989/sem.2008.28.2.167
  11. Karaton, M. (2014), "Comparisons of Elasto-Fiber and Fiber & Bernoulli-Euler reinforced concrete beamcolumn elements", Struct. Eng. Mech., 51(1), 89-110. https://doi.org/10.12989/sem.2014.51.1.089
  12. Lin, H.Y. (2009), "On the natural frequencies and mode shapes of a multi-span Timoshenko beam carrying a number of various concentrated elements", J. Sound Vib., 319, 593-605. https://doi.org/10.1016/j.jsv.2008.05.022
  13. Maximov, J.T. (2014), "A new approach to modeling the dynamic response of Bernoulli-Euler beam under moving load", Coupl. Syst. Mech., 3(3), 247-265. https://doi.org/10.12989/csm.2014.3.3.247
  14. Mei, C. (2011), "Studying the effects of lumped end mass on vibrations of a Timoshenko beam using a wave-based approach", J. Vib. Control, 18(5), 733-742. https://doi.org/10.1177/1077546311406162
  15. Meirovitch, L. (1975), Elements of Vibration Analysis, McGraw-Hill, New York.
  16. Wang, C.Y. and Wang, C.M. (2012), "Exact vibration solution for exponentially tapered cantilever with tip mass", ASME J. Vib. Acoust., 134, 041012-1-4. https://doi.org/10.1115/1.4005835
  17. Wang, D. (2012), "Vibration and sensitivity analysis of a beam with a lumped mass of translational and rotary inertias", ASME J. Vib. Acoust., 134, 034502-1-6. https://doi.org/10.1115/1.4005827
  18. Wu, J.J. (2005), "Use of equivalent mass method for free vibration analyses of a beam carrying multiple two-dof spring-mass systems with inertia effect of the helical springs considered", Int. J. Numer. Meth. Eng., 65, 653-678
  19. Wu, J.J. (2006), "Study on the inertia effect of helical springs of the absorber on suppressing the dynamic responses of a beam subjected to a moving load", J. Sound Vib., 297(3-5), 981-999. https://doi.org/10.1016/j.jsv.2006.05.011
  20. Wu, J.S. and Hsu, T.F. (2007), "Free vibration analyses of simply supported beams carrying multiple point masses and spring mass systems with mass of each helical spring considered", Int. J. Mech. Sci., 49, 834-852. https://doi.org/10.1016/j.ijmecsci.2006.11.015
  21. Wu, J.S. and Chen, J. H. (2012), "An efficient approach for determining forced vibration response amplitudes of a MDOF system with various attachments", Shock Vib., 19, 57-79. https://doi.org/10.1155/2012/457104
  22. Yesilce, Y. (2010), "Effect of axial force on the free vibration of Reddy-Bickford multi-span beam carrying multiple spring-mass systems", J. Vib. Control, 16(1), 11-32. https://doi.org/10.1177/1077546309102673
  23. Yesilce, Y., Demirdag, O. and Catal, S. (2008), "Free vibrations of a multi-span Timoshenko beam carrying multiple spring-mass systems", Sadhana, 33(4), 385-401. https://doi.org/10.1007/s12046-008-0026-1