DOI QR코드

DOI QR Code

Consideration on design procedure of room-and-pillar underground structure part I: parametric study

주방식 지하구조물의 설계 방법 고찰 Part I: 매개변수 연구

  • Lee, Chulho (Geotechnical Engineering Research Division, Korea Institute of Construction Technology) ;
  • Hwang, Jedon (ESCO Consultant & Engineers Co., Ltd.) ;
  • Kim, Eunhye (ESCO Consultant & Engineers Co., Ltd.) ;
  • Chang, Soo-Ho (Geotechnical Engineering Research Division, Korea Institute of Construction Technology)
  • 이철호 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실) ;
  • 황제돈 (에스코컨설턴트) ;
  • 김은혜 (에스코컨설턴트) ;
  • 장수호 (한국건설기술연구원 SOC성능연구소 Geo-인프라연구실)
  • Received : 2014.09.02
  • Accepted : 2014.09.22
  • Published : 2014.09.30

Abstract

In this study, in order to suggest the design method for supports in the room-and-pillar underground structure, the case study was carried out. In the case study, shape of rock pillar and room was mainly considered. From the analysis, a displacement at the roof, the maximum principle stress and plastic state were examined. To optimize variables in the case study, cases from the Seoul metro station were analyzed, then a target depth of the underground structure and ground conditions were determined. And the height of rock pillar and room were chosen from the assumed purpose of underground space, i.e. living/office and warehouse. Total cases of analysis was 180 cases including 3 types of ground condition, 5 types of rock pillar and 6 types of roof span. It is expected that results from analysis can be used to determine the installation of support in room-and-pillar underground structure with stability, utilization efficiency of underground space and applicability of vehicles.

본 연구에서는 주방식 지하구조물에서 지보재 설계를 위한 매개변수 연구를 수행하였다. 지보재 설계에 앞서 설계에 필요한 암주와 공간의 형상별 천단변위, 최대 주응력, 소성영역에 대한 해석을 수행하였다. 해석에 사용할 매개변수를 최적화 하기위해 주방식 지하구조물의 대상 심도와 지반 조건은 기존 지하철 정거장 건설 사례를 분석하여 결정하였으며 지하공간의 활용 목적에 따라 암주의 형상과 공간의 형상을 설정하여 총 180가지의 경우를 선택하였다. 매개변수 해석을 통해 획득한 결과는 향후 지하구조의 안정성과 공간 활용성, 시공장비의 적용성을 고려하여 지보재 설계와 설치 여부를 판단할 수 있는 근거자료로 활용될 수 있을 것으로 판단된다.

Keywords

References

  1. Carmody, J., Sterling, R. (1993), Underground Space Design-A guide to Subsurface Utilization and Design for People in Underground Spaces, International Thomson Publishing company, p. 110.
  2. Darling, P. (2011), Mining Engineering handbook, Society for Mining, Metallurgy and Exploration, INC.(SME), 3rd Edition.
  3. Esterhuizen, G.S., Dolinar, D.R., Ellenberger, J.L, Prosser, L.J. (2011), Pillar and roof span design guidelines for underground stone mines, Department Of Health And Human Services, NIOSH, IC 9526.
  4. Hardy, P., Agapito, J.F.T. (1982), "Induced horizontal stress method of pillar design in oil shale", XV Oil Shale Symp. Colorado School of Mines, Golden, Colorado.
  5. Hartman, H.L., Mutmansky, J.M. (2002), Introductory Mining Engineering, 2nd edtion, Wiley, New Jersey.
  6. Hedley, D.G.F., Grant, F. (1972), "Stope-and-pillar design for the Elliot Lake Uranium Mines", Bull. Can. Inst. Min. Metallurg. Vol. 63, pp. 37-44.
  7. Kimmelmann, M.R., Hyde, B., Madgwick, R.J. (1984), "The use of computer applications at BCL limited in planning pillar extraction and design of mining layouts", In: Proc., ISMR Symp. Design and Performance of Underground Excavations. Brit. Geotech. Soc., London, pp. 53-63.
  8. Krauland, N., Soder, P.E. (1987), "Determinating pillar strength from pillar failure observations", Eng. Min. J. Vol. 8, pp. 34-40.
  9. Lee, C., Chang, S.-H., Shin, H.-S. (2013a), "A numerical study on evaluation of unsupported pillar strength in the room and pillar method", J. of Korean Tunn Undergr Sp Assoc, Vol. 15, No. 4, pp. 443-453 (in Korean). https://doi.org/10.9711/KTAJ.2013.15.4.443
  10. Lee, C., Chang, S.-H, Shin, H.-S. (2013b), "A study on conceptual evaluation of structural stability of room-and-pillar underground space", J. of Korean Tunn Undergr Sp Assoc, Vol. 15, No. 6, pp. 585-597 (in Korean). https://doi.org/10.9711/KTAJ.2013.15.6.585
  11. Lunder, P.J., Pakalnis, R. (1997), "Determination of the strength of hard-rock mine pillars", Bull. Can. Inst. Min. Metall. Vol. 90, pp. 51-59.
  12. Potvin, Y., Hudyma, M.R., Miller, H.D.S. (1989), "Design guidelines for open stope support", Bull. Can. Min. Metall. Vol. 82, pp. 53-62.
  13. Sheorey, P.R., Loui, J.P., Singh, K.B., Singh, S. K. (2000), "Ground subsidence observations and a modified influence function method for complete subsidence prediction", Int. J. Rock Mech. Min. Sci. Vol. 37, pp. 801-818. https://doi.org/10.1016/S1365-1609(00)00023-X

Cited by

  1. A preliminary study on the optimum excavation sequence of a room-and-pillar underground structure vol.17, pp.4, 2015, https://doi.org/10.9711/KTAJ.2015.17.4.499
  2. A preliminary study on the excavation sequence of a room-and-pillar underground structure by the drill-and-blast method vol.17, pp.6, 2015, https://doi.org/10.9711/KTAJ.2015.17.6.605