References
- ASTM (2003), Standard test method for measuring geosynthetic pullout resistance in soil, ASTM D 6706-01, ASTM Book of Standards, Volume 04.13, Philadelphia, USA.
- Berg, R. R., Christopher, B. R. and Samtani, N. C. (2009a), Design and Construction of Mechanically Stabilized Earth Walls and Reinforced Soil Slopes - Volume I, U.S. Department of Transportation, Federal Highway Administration, Washington DC, Publication No. FHWA-NHI-10-024(FHWA GEC 011-Vol I).
- Berg, R. R., Christopher, B. R. and Samtani, N. C. (2009b), Design and Construction of Mechanically Stabilized Earth Walls and Reinforced Soil Slopes - Volume II, U.S. Department of Transportation, Federal Highway Administration, Washington DC, Publication No. FHWA-NHI-10-025(FHWA GEC 011-Vol II).
- Bergado, D. T., Hardiyatimo, H. C., Cisneros, C. B., Chun, C. J., Alfaro, M. C., Balasubramaniam, A. S. and Anderson, L. R. (1992) "Pull-out resistance of steel geogrids with weathered clay as backfill material", Geotechnical Testing Journal, Vol.15, No.1, pp.33-46. https://doi.org/10.1520/GTJ10222J
- Hong, K. K. (2011), Evaluation of pullout resistance and design of strip-type reinforcement based on anchorage effect, Ph.D. Thesis, Chung-Ang University. (in Korean with English summary)
- Horpibulsuk, S. and Niramitkornburee, A. (2010), "Pullout resistance of bearing reinforcement embedded in sand", SOILS AND FOUNDATIONS, Vol.50, No.2, pp.215-226. https://doi.org/10.3208/sandf.50.215
- Jewell, R. A., Milligan, G. W. E., Sarsby, R. W. and Dubois, D. (1984), "Interaction between soil and grids", Symposium on Polymer Grid Reinforcement in Civil Engineering, London, UK, 18-30.
- Kim, H. T., Bang, Y. K., Park, S. S. and Kim, H. J. (2003), "An Experimental Study on Pullout Behavior Characteristics of the Steel Strip Reinforcement Bolted with Braced Angles", Journal of the Korean Geo-Environmental Society, Vol.4, No.1, pp.67-75. (in Korean with English summary)
- Lee, K. W., Cho, S. D., Han, J. G. and Hong, K. K. (2009), "Pullout Resistance of Steel Strip Reinforcement with Transverse Members using Large-scale Pullout Tests", Journal of the Korean Geosynthetics Society, Vol.8, No.4, pp.1-8. (in Korean with English summary)
- Lee, K. W., Cho, S. D., Han, J. G. and Hong, K. K. (2012), "Evaluation of Strain Distribution and Pullout Strength based on Width and Horizontal Spacing of Geosynthetic Strip", Journal of the Korean Geosynthetics Society, Vol.11, No.2, pp.39-47. (in Korean with English summary) https://doi.org/10.12814/jkgss.2012.11.2.039
- Palmeira, E. M. and Milligan, G. W. E. (1989), "Scale and other factors affecting the results of pullout tests of grids buried in sand", Geotechnique, Vol.39, No.3, 511-524. https://doi.org/10.1680/geot.1989.39.3.511