References
- S. H. Kim, Motor Control - DC, AC, BLDC, Bogdoo, Ch. 6, pp. 294-304, 2014.
- C. French and P. Acarnley, "Direct torque control of permanent magnet drives," IEEE Trans. Ind. Appl., Vol. 32, No. 5, pp. 1080-1088, Sep./Oct, 1996. https://doi.org/10.1109/28.536869
- R. Bojoi and B. He, "Sensorless direct flux and torque control for direct drive washing machine applications," in Conf. Rec. IEEE ECCE, pp. 347-354, 2011.
- L. Zhong, M. F. Rahman, W. Y. Hu, and K. W. Lim, "Analysis of direct torque control in permanent magnet synchronous motor drives," IEEE Trans. Power Electron., Vol. 12, No. 3, pp. 528-536, May 1997. https://doi.org/10.1109/63.575680
- Z. Xu and M. F. Rahman, "Direct torque and flux regulation of an IPM synchronous motor drive using a variable structure approach," IEEE Trans. Power Electron., Vol. 22, No. 6, pp. 2487-2498, Nov. 2007. https://doi.org/10.1109/TPEL.2007.909208
- G. F. H. Beng, Sensorless direct torque and flux control of interior permanent magnet synchronous motor at very low speeds including standstill, Ph.D. Dissertation, University of New South Wales, 2010.
- L. Tang, L. Zhong, M. F. Rahman, and Y. Hu, "A novel direct torque controlled interior permanent magnet synchronous machine drive with low ripple in flux and torque and fixed switching frequency," IEEE Trans. Power Electron., Vol. 19, No. 2, pp. 346-354, Mar. 2004. https://doi.org/10.1109/TPEL.2003.823170
- Y. Inoue, S. morimoto, and M. Sanada, "Control method for direct torque controlled PMSG in wind power generation system," in Conf. Rec. IEEE IEMDC, pp. 1231-1238, 2009.
- Y. Inoue, S. morimoto, and M. Sanada, "A novel method of maximum power operation for IPMSMs in DTC systems," in Proc. 13th EPE, pp. 1-10, 2009.
- N. C. Park, Analysis and control in flux plane for PMSM drive systems based on direct torque control, Ph.D. Dissertation, Kangwon Nat'l Univ., Ch. 4, 2013.
Cited by
- Wide-Range Sensorless Control for SPMSM Using an Improved Full-Order Flux Observer vol.15, pp.3, 2015, https://doi.org/10.6113/JPE.2015.15.3.721