조명전기설비학회논문지 (Journal of the Korean Institute of Illuminating and Electrical Installation Engineers)

  • 제28권8호
  • /
  • Pages.69-74
  • /
  • 2014
  • /
  • 1229-4691(pISSN)
  • /
  • 2287-5034(eISSN)
한국조명전기설비학회 (The Korean Institute of IIIuminating and Electrical Installation Engineers)
권호 표지
DOI QR코드

DOI QR Code

배터리 교환형 전기자동차의 배터리 접속기 내구성 평가에 관한 연구

A Study of Durability Evaluation for Couplers in Battery Changeable Electric Vehicle

  • 김광민 (한양대학교 전기공학과 대학원) ;
  • 윤준보 (한양대학교 전기공학과 대학원) ;
  • 강병국 (한양대학교 전기공학과 대학원) ;
  • 이주 (한양대학교 전기생체공학부)
  • Kim, Kwang-Min (Electrical Engineering of Hanyang University) ;
  • Yun, Jun-Bo (Electrical Engineering of Hanyang University) ;
  • Kang, Byung-Guk (Electrical Engineering of Hanyang University) ;
  • Lee, Ju (Electrical Bio-Engineering of Hanyang University)
  • 투고 : 2014.04.23
  • 심사 : 2014.06.12
  • 발행 : 2014.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, many countries are researching and developing the various Electric Vehicle(EV) for reserving their natural environments and so on. But the charging time that is longer than the time of filling up the traditional engine vehicle will be the obstacles of spreading them. So, the other type EV is developed. It is the Battery Changeable EV. But there is not testing method for it. Especially, the defining of the durability evaluation for the couplers between battery and charger is very important because the couplers are changed very frequently. So, they may cause many faults and problems. Therefore, this study shows the definition of the durability procedure and the test is conducted with the equipment.

키워드

참고문헌

  1. IEC 61124 Reliability testing - Compliance tests for constantfailure rate and constant failure intensity (2012).
  2. The Effect of Mileage on Recharging Infrastructure - Il-Hwan Park, Sin-Hwan Kang, Myung-chul Shin, KIEE, 2010 KIEE Power Engineering Society Conference, 2010.11, page(s): 308-309.
  3. IEC 60127-1 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links ed2.0 (2006).
  4. JIS K 7194 Testing method for resistivity of conductive plastic with a four-point probe array (1994).
  5. IEC 61851-1 Electric vehicle conductive charging system - Part 1: General requirements (2010).
  6. IEC 61851-23 Electric vehicle conductive charging system - Part 23: DC Electric vehicle charging station (2014).
  7. IEC 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (2011).
  8. Study on Standard for Ensured Safety of Electric Vehicle Charger - Ki-Yeon, Hyang-Kon Kim, Dong-Ook Kim, Hyoung-Jun Gil, KIEE, 2011 KIEE Conference, 2011.7, page(s): 2148-2149.