DOI QR코드

DOI QR Code

3차권선이 추가된 직렬연결형 초전도한류기의 전류제한 및 회복 특성 향상

Improvement of Current Limiting and Recovery Characteristics in Series Connection Type SFCL with Added Third Winding

  • 고석철 (공주대학교 산학협력단) ;
  • 한태희 (중원대학교 첨단소재공학과) ;
  • 임성훈 (숭실대학교 전기공학부)
  • 투고 : 2014.03.19
  • 심사 : 2014.06.07
  • 발행 : 2014.08.31

초록

The series connection type superconducting fault current limiter (SFCL) with added third winding, which was magnetically coupled in one iron core, was proposed. The proposed SFCL was expected to be more improved by just adding third winding into the conventional series connection type SFCL with two coils. To analyze the contribution of the third winding for the current limiting and the recovery characteristics of the SFCL, the short-circuit tests for the series connection type SFCL with the added third winding were performed together with the analysis on its electrical equivalent circuit. From the comparative analysis on the amplitude of the limited fault current and the power burden of the high-TC superconducting (HTSC) element comprising this SFCL, the improved current limiting and recovery characteristics of the series connection type SFCL using the third winding could be confirmed.

키워드

참고문헌

  1. S. H. Lim, H. S. Choi, D. C. Chung, Y. H. Jeong, Y. H. Han, T. H. Sung, B. S. Han, "Fault current limiting characteristics of resistive type SFCL using a transformer," IEEE Trans. Appl. Supercond. vol. 15, no. 2, pp. 2055-2058, Jun. 2005. https://doi.org/10.1109/TASC.2005.849450
  2. H. Kado and M. Ichikawa, M. Shibuya, M. Kojima, M. Kawahara, T. Matsumura, "Inductive type fault current limiter using Bi-2223 thick film on MgO cylinder with Bi-2212 buffer Layer," IEEE Trans. Appl. Supercond. vol. 15, no. 2, pp. 2051-2054,Jun. 2005. https://doi.org/10.1109/TASC.2005.849449
  3. H. Shimizu, Y. Yokomizu, T. Matsumura, and N. Murayama, "Proposal of flux flow resistance type fault current limiter using Bi2223 high Tc superconducting bulk," IEEE Trans. Appl. Supercond. vol. 12, no. 1, pp. 876-879, Mar. 2002. https://doi.org/10.1109/TASC.2002.1018540
  4. S. H. Lim, T. H. Han, S. W. Yim, H. S. Choi, B.S. Han, "Current limiting characteristics of a flux-lock type SFCL dependent on fault angles and core saturation," IEEE Trans. Appl. Supercond. vol. 17, no. 2, pp. 1827-1830, Jun. 2007. https://doi.org/10.1109/TASC.2007.899868
  5. H. S. Choi, and S. H. Lim, "Operating performance of the flux-lock and the transformer type superconducting fault current limiter using the YBCO thin films," IEEE Trans. Appl. Supercond. vol. 17, no. 2, pp. 1823-1826, Jun. 2007. https://doi.org/10.1109/TASC.2007.898482
  6. Seckcheol Ko, Sung-Hun Lim, and Tae-Hee Han, "Analysis on fault current limiting and recovery characteristics of a flux-lock type SFCL with an isolated transformer," Physica C, vol. 484, pp. 263-266, Jan. 2013. https://doi.org/10.1016/j.physc.2012.03.041
  7. S. H. Lim, H. S. Choi, "Quench characteristics of HTSC elements in series-connected flux-lock type SFCLs through magnetic flux-linkage," Physica C, vol. 445-448, pp. 1073-1077, Oct. 2006. https://doi.org/10.1016/j.physc.2006.05.027
  8. S. H. Lim, "Operational characteristics of flux-lock type SFCL with series connection of two coils," IEEE Trans. Appl. Supercond. vol. 17, no. 2, pp. 1895-1898, Jun. 2007. https://doi.org/10.1109/TASC.2007.899869
  9. S. H. Lim, "Comparative study on current limiting characteristics of flux-lock type SFCL with series or parallel connection of two coils," Physica C, vol. 468, pp. 2076-2080, Sep. 2008. https://doi.org/10.1016/j.physc.2008.05.130