Smart Structures and Systems

  • 제12권1호
  • /
  • Pages.23-39
  • /
  • 2013
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation of smart multifunctional optical sensor platform and its application in optical sensor networks

  • Pang, C. (Department of Mechanical Engineering, University of Maryland) ;
  • Yu, M. (Department of Mechanical Engineering, University of Maryland) ;
  • Gupta, A.K. (Department of Mechanical Engineering, University of Maryland) ;
  • Bryden, K.M. (Department of Mechanical Engineering, Iowa State University)
  • 투고 : 2012.01.08
  • 심사 : 2012.11.20
  • 발행 : 2013.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this article, a smart multifunctional optical system-on-a-chip (SOC) sensor platform is presented and its application for fiber Bragg grating (FBG) sensor interrogation in optical sensor networks is investigated. The smart SOC sensor platform consists of a superluminescent diode as a broadband source, a tunable microelectromechanical system (MEMS) based Fabry-P$\acute{e}$rot filter, photodetectors, and an integrated microcontroller for data acquisition, processing, and communication. Integrated with a wireless sensor network (WSN) module in a compact package, a smart optical sensor node is developed. The smart multifunctional sensor platform has the capability of interrogating different types of optical fiber sensors, including Fabry-P$\acute{e}$rot sensors and Bragg grating sensors. As a case study, the smart optical sensor platform is demonstrated to interrogate multiplexed FBG strain sensors. A time domain signal processing method is used to obtain the Bragg wavelength shift of two FBG strain sensors through sweeping the MEMS tunable Fabry-P$\acute{e}$rot filter. A tuning range of 46 nm and a tuning speed of 10 Hz are achieved. The smart optical sensor platform will open doors to many applications that require high performance optical WSNs.

키워드

참고문헌

  1. Akyildiz, I., Su, W., Sankarasubramaniam, Y. and Cayirci, E. (2002), "Wireless sensor networks: a survey", Comput. Netw., 38, 393- 422. https://doi.org/10.1016/S1389-1286(01)00302-4
  2. Allan, W.R., Graham, Z.W., Zayas, J.R., Roach, D.P. and Horsley D.A (2009), "Multiplexed fiber Bragg grating interrogation system using a microelectromechanical Fabry-Perot tunable filter", IEEE Sens. J., 9(8), 936-943. https://doi.org/10.1109/JSEN.2009.2024849
  3. Chtcherbakov, A.A. and Swart. P.L. (2004), "Chirped fiber-optic Bragg grating interrogator in a multiplexed Bragg grating sensor configuration", J. Lightwave Technol., 22(6), 1543-1547. https://doi.org/10.1109/JLT.2004.829227
  4. Crossbow Technology, Inc. (2007), ITS400, Imote2 Basic Sensor Board, San Jose, CA.
  5. Cusano, A., Cutolo, A., Nasser, J., Giordano, M. and Calabro, A. (2004), "Dynamic strain measurements by fibre Bragg grating sensor", Sensor. Actuat. A-Phys., 110(1-3), 276-281. https://doi.org/10.1016/j.sna.2003.10.031
  6. Fedder, G.K. (1994), Simulation of microelectromechanical systems, PhD Dissertation, Electrical Engineering and Computer Sciences, University of California, Berkeley, CA.
  7. Guo, H., Xiao, G., Mrad, N. and Yao, J. (2011), "Fiber optic sensors for structural health monitoring of air platforms", Sensors, 11 (4), 3687-3705. https://doi.org/10.3390/s110403687
  8. Irmer, S., Daleiden, J., Rangelov, V., Prott, C., Romer, F., Strassner, M., Tarraf, A. And Hillmer, H. (2003), "Ultralow biased widely continuously tunable Fabry-Perot filter", IEEE Photonic. Tech. L., 15(3), 434-436. https://doi.org/10.1109/LPT.2002.807908
  9. Kerrouche, A., Boyle, W.J.O., Sun, T. and Grattan, K.T.V (2009), "Design and in-the-field performance evaluation of compact FBG sensor system for structural health monitoring applications", Sensor. Actuat. A-Phys., 151(2), 107-112. https://doi.org/10.1016/j.sna.2009.01.021
  10. Kersey, A.D., Berkoff, T.A. and Morey, W.W. (1993), "Multiplexed fiber Bragg grating strain-sensor system with a fiber Fabry-Perot wavelength filter", Optics Lett., 18(16), 1370-1372. https://doi.org/10.1364/OL.18.001370
  11. Lloyd, S.W., Newman, J.A., Wilding D.R., Selfridge, R.H. and Schultz, S.M. (2007), "Compact optical fiber sensor smart node", Rev. Sci. Instrum., 78, 035108. https://doi.org/10.1063/1.2715994
  12. Pang, C., Yu, M., Zhang, X.M., Gupta A.K. and Bryden, K.M. (2011), "Multifunctional optical MEMS sensor platform for wireless optical sensor networks", Proceedings of the 16th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers'11), Beijing, China, June.
  13. Pang, C., Yu, M., Zhang, X.M., Gupta A.K. and Bryden, K.M. (2012), "Multifunctional optical MEMS sensor platform with heterogeneous fiber optic Fabry-Perot sensors for wireless sensor networks", Sensors and Actuators A-Physical, http://dx.doi.org/10.1016/j.sna.2012.03.016.
  14. Rice, J.A. and Spencer, B.F. (2008), "Structural health monitoring sensor development for the Imote2 platform", Proceeding of the SPIE Smart Structures/NDE, San Francisco.
  15. Rodrigues, C., Felix, C. and Figueiras, J. (2011), "Fiber-optic-based displacement transducer to measure bridge deflections", Struct. Health Monit., 10(2), 147-156. https://doi.org/10.1177/1475921710373289
  16. Sano, Y. and Yoshino, T. (2003), "Fast optical wavelength interrogator employing arrayed waveguide grating for distributed fiber Bragg grating sensors", J. Lightwave Technol., 21(1), 132-139. https://doi.org/10.1109/JLT.2003.808620
  17. Senturia, S.D. (2001), Microsystem Design, Springer.
  18. Song, M., Yin, S. and Ruffin, P.B. (2000), "Fiber Bragg grating strain sensor demodulation with quadrature sampling of a Mach-Zehnder interferometer", Appl. Optics, 39(7) 1106-1111. https://doi.org/10.1364/AO.39.001106
  19. Talebinejad, I., Fischer, C. and Ansari, F. (2009), "Serially multiplexed FBG accelerometer for structural health monitoring of bridges", Smart Struct. Syst., 5(4), 345-355. https://doi.org/10.12989/sss.2009.5.4.345
  20. Tang, W.C. (1990), Electrostatic comb drive for resonant sensor and actuator applications, PhD Thesis, Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, CA.
  21. Vito, S.D., Palma, P.D., Ambrosino, C., Massera, E., Burrasca, G., Miglietta, M.L. and Francia, G.D. (2011), "Wireless sensor networks for distributed chemical sensing: addressing power consumption limits with on-board intelligence", IEEE Sens. J.,11, 947-955. https://doi.org/10.1109/JSEN.2010.2077277
  22. Zhang, X.M., Liu, Y.X., Bae, H., Pang, C. and Yu, M. (2009), "Phase modulation with micromachined resonant mirrors for low-coherence fiber-tip pressure sensors", Optics Express, 17, 23965-23974. https://doi.org/10.1364/OE.17.023965

피인용 문헌

  1. A Practical Monitoring System for the Structural Safety of Mega-Trusses Using Wireless Vibrating Wire Strain Gauges vol.13, pp.12, 2013, https://doi.org/10.3390/s131217346
  2. Structural Health Monitoring of Civil Infrastructure Using Optical Fiber Sensing Technology: A Comprehensive Review vol.2014, 2014, https://doi.org/10.1155/2014/652329
  3. Structural state awareness through integration of global dynamic and local material behavior pp.1530-8138, 2019, https://doi.org/10.1177/1045389X19828489
  4. Strain monitoring of reinforced concrete with OTDR-based FBG interrogation technique vol.20, pp.3, 2013, https://doi.org/10.12989/sss.2017.20.3.343