Journal of Hydrogen and New Energy (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Hydrogen Brittleness on Welding Part for SDS Bottles

삼중수소 저장용기 이종 접합부의 수소 취성

  • Kim, Raymund K.I. (Korea National University of Transportation) ;
  • Jung, Seok (Dept. of Materials Science and Engineering, Myongji University) ;
  • Kang, Hyungoo (Tritium Technology Team / ITER KOREA / National Fusion Research Instritute) ;
  • Chang, Minho (Tritium Technology Team / ITER KOREA / National Fusion Research Instritute) ;
  • Yun, Seihun (Tritium Technology Team / ITER KOREA / National Fusion Research Instritute) ;
  • Hong, Tae-Whan (Korea National University of Transportation)
  • 김경일 (한국교통대학교 신소재공학과) ;
  • 정석 (명지대학교 신소재공학과) ;
  • 강현구 (ITER 한국사업단 국가핵융합연구소 삼중수소 기술팀) ;
  • 장민호 (ITER 한국사업단 국가핵융합연구소 삼중수소 기술팀) ;
  • 윤세훈 (ITER 한국사업단 국가핵융합연구소 삼중수소 기술팀) ;
  • 홍태환 (한국교통대학교 신소재공학과)
  • Received : 2013.04.01
  • Accepted : 2013.04.26
  • Published : 2013.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Tritium was attracted with high energy source in neutron fusion energy systems. A number of research was performed in tritium storage materials. The Korea was raised storage and delivery systems (SDS) of international thermonuclear experimental reactor (ITER) research. However, bottles of SDS would be important because of stability. The bottles have a welding zone, this zone will be vulnerable to hydrogen embrittlement. This zone have a high thermodynamic energy and heat deterioration. Therefore bottles were studied about hydrogen embrittlement to retain stability. The heat treatment of hydrogen was carried under pressure-composition-temperature (PCT) apparatus because of checking at real time. And then, mechanical properties were evaluated by tensile test and hardness test. In results of this study, hydrogen atmosphere condition is very important by tensile test and kinetics test. The samples were evaluated, that is more weak hydrogen pressure, increasing temperature and time. This results could be useful in SDS bottle designs.

Keywords

References

  1. M. Glugla, A. Antipenkov, S. Beloglazov, C. Caldwell- Nichols, I.R. Cristescu, I. Cristescu, C. Day, L. Doerr, J. -P. Girard and E. Tada, "The ITER Tritium System", Fusion Engineering and Design, Vol. 87, 2007, p. 472.
  2. H. Chung, M. Shim, Yoshida, H. Jin, J. Lee, D/-H. Ahn, K.-K. Kim, K.-M. Song, S.-H. Yun and S. Cho, "Korea's Progress on the ITER Tritium System", Fusion Engineering and Design, Vol. 84, 2009, p. 599. https://doi.org/10.1016/j.fusengdes.2009.01.073
  3. Hongsuk Chung, Dongyou Chung, Daeseo Koo, Jisung Lee, Myunghwa Shim, Seungyon Cho, Kijung Jung and Seihun Yun, "Storage and Delivery of Hydrogen Isotopes", Trans. of the Korean Hydrogen and New Energy Society, Vol. 22, No. 3, 2011, p. 372.
  4. Seihun Yun, Minho Chang, Hyungoo Kang, Chanshuk Kim, Seungyon Cho, Kijung jung, Hongsuk Chung and Kyumin Song, "Tritium Fuel Cycle Technology of ITER Project", Trans. of the Korean Hydrogen and New Energy Society, Vol. 23, No. 1, 2012, p. 56. https://doi.org/10.7316/khnes.2012.23.1.056
  5. Minsoo Lee, Seung-Woo Paek, Kwang-Rag Kim, Do-Hee Ahn, Sung-Paal Yim, Hongsuk Chung, Heui-Joo Choi, Jeong-Won Choi, Soon-Hwan Son and Kyu-Min song, "Safety evaluation of type B transport container for tritium storage vessel", J. of the Korean Radioactive Waste Society, Vol. 5, No. 2, 2007, p. 155.
  6. Do-Hee Ahn, Kwang-Rag Kim, Sung-Paal Yim, Minsu Lee, Hongsuk Chung and Seengwoo Paek, "Performance Test of the Tritium Storage Vessel", Korean Chem. Eng. Res., Vol. 42, No. 6, 2004, p. 771.
  7. Haneul Yoo, Seihun Yun, Minho Chang, Hyungoo Kang, Hyunchul Ju, "A Numerical Investigation of hydrogen Absorption Reaction Based on ZrCo for Tritium Storage (I)", Trans. of the Korean Hydrogen and New Energy Society, Vol. 23, No. 5, 2011, p. 448. https://doi.org/10.7316/KHNES.2012.23.5.448
  8. D. Koo, D. Jung, H. Chung, S. Cho, M. Chang, S. Yun, H. Kang, K. Song, "Fabrication and Unspection of a Rectangular Type-Bed for Tritium Sotrage", Aplied Chemistry, Vol. 14, No. 1, 2010, p. 89.
  9. M. Shim. H. Chung, K. Kim, H. Yoshida, S. Cho, D. Kim and M. Ahn, "Heat analysis on the initial reference design of ZrCo hydride beds for ITER", Fusion Engineering and Design, Vol. 83, 2008, p. 1433. https://doi.org/10.1016/j.fusengdes.2008.06.035
  10. Z.G. Huang, Z.P. Guo, A. Calka, D. Wexler, C. Lukey, and H.K. Liu, "Effects of iron oxide (Fe2O3, Fe3O4) on hydrogen storage properties of Mg-based composites", J. Alloys Compd., Vol. 422, 2006, p. 299. https://doi.org/10.1016/j.jallcom.2005.11.074

Cited by

  1. Evaluations of Hydrogen Embrittlement Behaviours on Dissimilar Welding Part of SDS Bottles (I) vol.26, pp.2, 2015, https://doi.org/10.7316/KHNES.2015.26.2.114