한국응용과학기술학회지 (Journal of the Korean Applied Science and Technology)

  • 제29권3호
  • /
  • Pages.495-502
  • /
  • 2012
  • /
  • 1225-9098(pISSN)
  • /
  • 2288-1069(eISSN)
한국응용과학기술학회 (The Korean Society of Applied Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

침전법을 이용한 이산화티탄 입자 제조에 알콜과 온도가 미치는 영향에 관한 연구

Study about The Effect Alcohol and The Temperature Exert on $TiO_2$ Particle Production by Sedimentation Method

  • 김덕술 (동명대학교 의용공학과)
  • Kim, Duck-Sool (Dept. of Biomedical Engineering, Tongmyong University)
  • 투고 : 2012.09.04
  • 심사 : 2012.09.21
  • 발행 : 2012.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 $TiO_2$ 입자를 얻을 수 있는 침전법을 이용하여 $TiO_2$ 입자를 제조하였다. $TiO_2$ 입자 제조시 사용되는 알콜 용매의 종류와 온도 변화 등의 매개변수가 $TiO_2$ 입자의 결정 구조, 입자의 크기 및 형태에 미치는 영향을 조사하였다. $TiO_2$ 입자제조시 용매로 사용한 알콜 종류인 methyl alcohol, iso-propylalcohol, 그리고 tert-butylalcohol를 scanning electron microscope(SEM) 분석한 결과 iso-propylalcohol이 가장 좋은 결과를 가져왔다. 그리고 온도 변화를 열분석법을 사용한 결과 $200^{\circ}C$에서 $500^{\circ}C$까지는 아나타제 구조를 유지하였으나, $800^{\circ}C$에서는 루틸 구조로 전환되었다.

Using the Sedimentation method it's possible to get $TiO_2$ particle from which by this research, $TiO_2$ particle was produced. The parameter in the kind of the temperature and the alcohol solvent used $TiO_2$ particle production investigated crystal structure of $TiO_2$ particle and the influence exerted on the size of the particle and the form. After scanning electron microscope (SEM) analyzed methyl alcohol, iso-propylalcohol and tert-butylalcohol used by a solvent at the $TiO_2$ particle production, iso-propylalcohol was most effective. And after an thermogravimetric analyzer method was used, the anatase structure was maintained $500^{\circ}C$ by $200^{\circ}C$, but it was converted by the rutile structure by $800^{\circ}C$.

키워드

참고문헌

  1. B. M. Lee, D. Y. Shin, and S. M. Han, Synthesis of Hydrous $TiO_2$ Powder by Droppimg Precipitant Method and Photocatalytic Properties, J. of the Kor. Cer. Soc. 37(4), 308 (2000).
  2. T. Fuyuki and H. Matsunarni, E1ectronic Properties of the Interface between Si and TiO2 Deposited at very Low Temperatures, Jpn. J . App. Phys., 25(9), 1288 (1986).
  3. K. Prasad, A. R. Bal1y, P. E. Schrnid, F. Levy, J. Benoit, C. Barthou and P. Benal1ou1, Ce-doped $TiO_2$ Insu1ators in Thin Fi1m E1ectro1urninescent Devices, J . App. Phys., 36, 5696 (1997).
  4. Y. Zheng, E. Shi, Z. Chen, W. Li, and X. Hu, lnf1uence of Solution Concentrati-on on the Hydrothermal Preparation of Titania Crystallites, J . Mater. Chemi., 11, 1547 (2001).
  5. A Pottier, C. Chaneac, E. Tronc, L. Mazerolles, and J. P. Jolivet, Synthesis of Brookite $TiO_2$ Nanoparticles by Thermolysis of $TiCl_4$ in Strongly Acidic Aqueous Media, J. Mater. Chem., 11, 1116 (2001).
  6. S.J. Kim, S.D. Park, C.J. Jeon, K.H. Kim, H.G. Lee, Preparation of Mono-dispersed Ultrafine TiO2 Crystalline Powders by Homogeneous Spontaneous Precipitation From Aqueous $TiOCl_2$ Solution, Journal of the Korean Ceramic Socity, 35(10) 1212 (1998).
  7. S.J. Kim, S.D. Park, and Y.H Jeong, Homogeneous Precipitation of TiO2 Ultrafine Powders from Aqueous $TiOCl_2$ Solution. J. Am. Ceramic Soc., 82(4), 927 (1999).
  8. H. Kominami, M.Kohno, and Y. Kera, Synthesis of Brookite-type Titanium Oxide Nano-crystals in Organic media, Journal of Materals chemistry, 10, 1151 (2000).
  9. Q. Chen, Y Qian, Z. Chen, G. Zhou and Y Zhang, Preparation of $TiO_2$ Powder with Different Morphologies by An Oxidation-hydrothennal Combination Method , Mat. Lett., 22, 77 (1995).
  10. H. Y. Lee, Y. H. Park and K. H. Ko, Photocatalytic Characteristics of $TiO_2$ Films by LPMOCVD, J. Kor. Ceram, Soc., 36, 1303 (1999).
  11. B. M. Lee, D. Y Shin and S. M. Han, Synthesis of Hydrous $TiO_2$ Powder by Dropping Precipitant Method and Photocatalytic Properties, J. Kor. Ceram., Soc., 37, 308 (2000).
  12. B. M. Lee, D. Y Shin and S. M. Han, Synthesis of Hydrous $TiO_2$ Powder by Dropping Precipitant Method and Photocatalytic Properties, J. Kor. Ceram., Soc., 37, 308 (2000).
  13. Grtzel, M., Sol-gel Processed $TiO_2$ Films for Photovoltaic Applications, J. Sol-Gel Sci. Technol., 22(1-2), 7 (2001).
  14. C. S. Ki and P. Sotris E, The Effect of Alcohol Solvents on the Porosity and Phase Composition of Titania, J. of Colloid and Interface Sci., 231, 289 (2000).
  15. P. N. K. Kumar, XRD Patterns of Nanosized TiO 2 Powders Prepared by PFPE-NH 4 Surfactant at Various Preparation Conditions, Ph. D. Thesis, University of Twente, 7500 AE Enschede, The Netherlands (1993).
  16. V. Chhabra, V. Pillai, B. K. Mishra, A. Morrone, and D. O. Shah, Synthesis, Characterization, and Properties of Microemulsion - Mediated Nanophase TiO2 Particles, Langmuir , 11, 33 (1995).