References
- Park, B. J., Choi, Y. J. and Chu, C. N., "Prevention of Exit Crack in Micro-drilling of Soda-lime Glass", J. KSPE, pp. 1052-1055, 2001.
- Kang, G. H., Roh, Y. R. and Kim, G. M., "Fabrication of Micro-Channel with Embedded Electrode for Impedance Measurement", KSMPE, Vol. 5, No. 3, pp. 11-16, 2006.
- Bien, D. C., Mitchell, S. J. N. and Gamble, H. S., "Fabrication and characterization of a micromachined passive valve", J. Micromech. Microeng., Vol. 13, No. 5, pp. 557-562, 2003. https://doi.org/10.1088/0960-1317/13/5/305
- Bu, M., Melvin, T., Ensell, G. J., Wikinson, J. S., Evans, A. G. R., "A new masking technology for deep glass etching and its microfluidic application", Sens. Actuator A: Phys., Vol. 115, pp. 476-482.
- Yoo, J. H., "A principle and phenomena of laser micro processing", Proceedings of KIEE. Vol. 50, No. 5, 2001.
- http://www.coherent.co.kr
- Baumgart, P., Krajnovich, D. J., Nquyen, T. A. and Tam, A. C., "A new laser texturing techniques for high performance magnetic disk drives", IEEE Transactions on Magnetics, Vol. 31, No. 6, pp. 2946-2951, 1995. https://doi.org/10.1109/20.490199
- Tam, A. C., Pour, I. K., Nguyen, T. A., Krajnovich, D. J., Baumgart, P., Bennett, T. and Grigoropoulos, C., "Experimental and theoretical studies of bump formation during laser texturing of Ni-P disl substrates", IEEE Transactions on Magnetics, Vol. 32, No. 5, pp. 3771-3773, 1996. https://doi.org/10.1109/20.538831
- Crafer R. C. and Oakley, P. J., "Laser processing in manufacturing", Chapman, 1993.
- Bernd K., Horst E., Udo L. and Thomas K., " Drilling of Glass by Excimer Laser Mask Projection Technique", Journal of Laser Applications, Vol. 12, No. 5, pp. 189-193, 2000. https://doi.org/10.2351/1.1309553