DOI QR코드

DOI QR Code

Analyzing the Effects of MEA Designs on Cold Start Behaviors of Automotive Polymer Electrolyte Fuel Cell Stacks

자동차용 고분자전해질형연료전지 스택에서의 막-전극접합체 설계인자가 저온시동에 미치는 영향성 연구

  • Gwak, Geon-Hui (School of Mechanical Engineering, Inha University) ;
  • Ko, Jo-Han (School of Mechanical Engineering, Inha University) ;
  • Ju, Hyun-Chul (School of Mechanical Engineering, Inha University)
  • Received : 2012.01.30
  • Accepted : 2012.02.24
  • Published : 2012.02.28

Abstract

This paper presents a three-dimensional, transient cold-start polymer electrolyte fuel cell (PEFC) model to numerically evaluate the effects of membrane electrode assembly (MEA) design and cell location in a PEFC stack on PEFC cold start behaviors. The cold-start simulations show that the end cell experiences significant heat loss to the sub-freezing ambient and thus finally cold-start failure due to considerable ice filling in the cathode catalyst layer. On the other hand, the middle cells in the stack successfully start from $-30^{\circ}C$ sub-freezing temperature due to rapid cell temperature rise owing to the efficient use of waste heat generated during the cold-start. In addition, the simulation results clearly indicate that the cathode catalyst layer (CL) composition and thickness have an substantial influence on PEFC cold-start behaviors while membrane thickness has limited effect mainly due to inefficient water absorption and transport capability at subzero temperatures.

Keywords

References

  1. L. Mao and C. Y. Wang : "Analysis of Cold Start in Polymer Electrolyte Fuel Cells", Journal of Electrochemistry society, Vol. 154, No. 2 2007, pp. 139-146. https://doi.org/10.1149/1.2402123
  2. L. Mao, C. Y. Wang and Y. Tabuchi : "A Multiphase Model for Cold Start of Polymer Electrolyte Fuel Cells", Journal of Electrochemistry society, Vol. 154, No. 3, 2007, pp. 341-351. https://doi.org/10.1149/1.2430651
  3. F. Jiang, W. Fang and C. Y. Wang : "Nonisothermal cold start of polymer electrolyte fuel cells", Electrochimica Acta, Vol. 53, 2007, pp. 610-621. https://doi.org/10.1016/j.electacta.2007.07.032
  4. F. Jiang and C. Y. Wang : "Potentiostatic Start-Up of PEMFCs from Subzero Temperatures", Journal of Electrochemistry society, Vol. 155, No.7, 2008, pp. 743-751. https://doi.org/10.1149/1.2927381
  5. K. Jiao and X. Li : "Three-dimensional multiphase modeling of cold start processes in polymer electrolyte membrane fuel cells", Electrochimica Acta, Vol. 54, 2009, pp. 6876-6891. https://doi.org/10.1016/j.electacta.2009.06.072
  6. H. Meng : "Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures", International Journal of Hydrogen Energy, Vol. 33, 2008, pp. 5738-5747. https://doi.org/10.1016/j.ijhydene.2008.07.042
  7. H. Meng : "A PEM fuel cell model for cold-start simulation", Journal of Power Sources, Vol. 178, 2008, pp. 141-150. https://doi.org/10.1016/j.jpowsour.2007.12.035
  8. S. He and M. M. Mench : "One-Dimensional Transient Model for Frost Heave in Polymer Electrolyte Fuel Cells I. Physical Model", Journal of Electrochemistry society, Vol. 153, No. 9, 2006. pp. 1724-1731. https://doi.org/10.1149/1.2216547
  9. Y. Wang : "Analysis of the Key Parameters in the Cold Start of Polymer Electrolyte Fuel Cells", Journal of Electrochemistry society, Vol. 154, No. 10, 2007, pp. 1041-1048. https://doi.org/10.1149/1.2767849
  10. J. H. Ko and H. C. Ju : "Comparison of numerical simulation results and experimental data during cold-start of polymer electrolyte fuel cells", Applied Energy. in press.
  11. J. H. Ko, W. G. Kim, T. W. Hong, D. M. Kim and H. C. Ju : "Impact of metallic bipolar plates on cold-start behaviors of Polymer Electrolyte Fuel Cells (PEFCs)", Solid State Ionics. in press.
  12. M. Khandelwal, S. H. Lee and M. M. Mench : "One-dimensional thermal model of cold-start in a polymer electrolyte fuel cell stack", Journal of Power Sources, Vol. 172, 2007, pp. 816-830. https://doi.org/10.1016/j.jpowsour.2007.05.028
  13. K. Tajiri, Y. Tabuci and C. Y. Wang : "Isothermal Cold Start of Polymer Electrolyte Fuel Cells", Journal of The Electrochemical Society, Vol. 154, No. 2, 2007, pp. B147-B152. https://doi.org/10.1149/1.2402124
  14. K. Tajiri, Y. Tabuchi, F. Kagami, S. Takahashi, K. Yoshizawa and C. Y. Wang : "Effects of operating and design parameters on PEFC cold start", Journal of Power Sources, Vol. 165, 2007, pp. 279-286. https://doi.org/10.1016/j.jpowsour.2006.12.017