• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.32-39
• /
• 2000

To optimize the cold start process of a 4-stroke, 8 cylinder Diesel engine, a dynamic simulation model from cranking to idle speed is developed. Physically-based first order starter motor dynamics are used to model the performance of starting process which is very complex. These equations are solved using numerical schemes(Petzold-Gear BDF method) to describe the starting process of diesel engine and to study the effects of starting parameters. The validity of this model is examined by start test. This model can be served as a tool for computer aided control systems design to improve cold improve cold start performance.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.9-20
• /
• 1980

디이젤기관의 냉시동성이 가솔린기관에 비하여 떨어지는 것은 이미 우리가 알고 있는 사실이다. 근년에는 소형트럭, 승용차, 소형건설기계 등의 분야에 있어서도 고속디이젤기관을 널리 사용하게 되었고 앞으로 디이젤연료의 중질화 및 세탄가 저하의 영향 등을 고려할 경우 시동성의 확보는 더욱 중요한 문제로 된다. 시동성에 영향을 미치는 인자 혹은 시동성개선의 방책으로서는 분 무의 착화에 직접 관련되는 것 외에 축전지의 저온특성 혹은 기관의 마찰토오크 등 여러가지에 걸쳐 있으나 이들 중에서 특히 분무의 착화에 직접 관련되는 방책에 관해서는 그것이 시동성에 미치는 영향에만 그치는 것이 아니고 시동개시직후에 있어서 배출가스, 혹은 출력성능 등에 미 치는 영향에 대해서도 함께 고려를 하여야 할 경우가 있다. 본고에 있어서는 냉시동시의 분무의 착화에 대하여 직접 관련하거나 그것을 촉진시킨다고 생각되는 몇개의 인자와 구체적인 방책을 취급하므로써 그것들이 시동성 및 시동직후의 청백연 혹은 출력성능 등에 대하여 미치는 영향에 대해서 기술하며 아래에서 취급되는 시동시의 착화를 촉진하기 위한 실제적인 인자 및 방책은 어느 것이나 기본적으로는 하나의 개념에 집약된다. 즉 그것은 연표와 효소로부터 이루어지는 연소계에 있어서 착화조건을 갖추어야함을 말할 것도 없다.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.185-191
• /
• 2014

In this paper, we have implemented the low temperature fluidity test system with the composited package fuel heater, which has tested the low temperature fluidity and start time to evaluate the performance. Then we have compared the separation and the unified fuel heater type at $+20{\sim}-30^{\circ}C$. Also, we have tested the flowing pressure and start time, power consumption of heater. By comparing the performance with several condition, the experimental results obtain an improved start time of 23% and low temperature fluidity of 19%.

• KIPE Magazine
• /
• v.22 no.6
• /
• pp.30-35
• /
• 2017

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.144-148
• /
• 2023

Aircraft battery is the core equipment of an aircraft that supplies engine starting power and emergency power, and it must be charged to ensure sufficient capacity at all times and maintain high reliability to ensure stable power supply. The battery of the T-50 series aircraft is designed to enable the engine to start up to two times in temperatures as low as -18℃ and above. However, intermittent failures in engine starting have been observed during winter. In this paper, we analyze the failure phenomena occurring during low-temperature charging of the battery and improve the charging algorithm based on the analysis and test. Additionally, the results of start simulation tests show that the battery charging defects at low temperatures are resolved, and an improvement in the charging performance is confirmed; thus, validating the effectiveness of the new algorithm.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.165-166
• /
• 2017

본 논문에서는, 극저온($-32^{\circ}C$)에서 항공기의 초기 시동 및 이의 효율성을 높이기 위한 배터리관리시스템(BMS)의 사전 전기적 특성실험 및 이의 체계적 분석을 실시하였다. 항공기 초기 시동에 사용되는 리튬계열 배터리로서 원통형(cylindrical) 셀을 선택하되, 초기 시동을 위한 순간의 고출력이 가능한 6개의 셀을 수집하였다. 각 셀의 배터리팩(2S2P 및 4S4P) 형태로 구축하고 $-32^{\circ}C$)에서의 저온 방전 실험을 통해 항공기의 초기 시동용 배터리팩에 사용되는 원통형 셀의 선택 및 이의 강인함을 확인할 수 있다. 추가적으로 배터리팩의 설계 및 이의 배터리관리시스템을 위한 초기 정보로서 중요하리라 판단된다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.02a
• /
• pp.149-155
• /
• 2000

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.163-163
• /
• 2004

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.152-158
• /
• 2014

It is very important to supply the diesel fuel from fuel tank to combustion chamber in case of cold start procedure. the paraffin hydrocarbons are easily solidified at low fuel temperature and it can be blocking the fuel supply to the high pressure fuel pump. In order to reduce the fuel crystallization (Waxing), it have been used to develop not only cold flow additives but also the proper mounting design of fuel filter. Block heater in the fuel filter assembly have been also contained to improve the cold start and prevent blocking the fuel supply in Common Rail Direct Injection System. we can obtain the fuel pressure drop and fuel flow rate, power consumption of fuel heater to have the cold flow evaluation test with the saperated and composited fuel heater at the low ambient temperature, Due to evaluating cold flow performance of two block heater, we knew that composited package fuel heater was the excellent cold flow performance compared to separated type and obtained the parameters of cold flow.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.76-85
• /
• 2016

This study introduces the system layout and control strategy necessary to start and operate a fuel processor in a wide range of temperatures where a gasoline was selected as the fuel of fuel processor considering logistic support of Korea Army. The autothermal reformig(ATR) catalyst is heated to light-off temperature by combustion method in the initial stage. In order to ignite the gasoline and air mixture stably, the glow plug is installed after ATR catalyst. When the catalyst is increased to light-off temperature, the reformer is operated from initiation to steady state conditions as follows: Partial oxidation(POX) mode, partial ATR mode, full ATR mode. Finally the start-up and control strategy is validated by the operational test of gasoline fuel processor at low and room temperature. As a result the gasoline fuel processor is able to start-up within 40 min and to produce the reformate gas which has 37 ~ 42 vol.%(dry basis) of $H_2$ and 0.3 vol.% of CO.